/make/fossil-scm.mk
Makefile | 226 lines | 86 code | 18 blank | 122 comment | 4 complexity | f84881aa904c997aa0982aabdfbb05e1 MD5 | raw file
- ###########################################################
- #
- # fossil-scm
- #
- ###########################################################
- #
- # FOSSIL-SCM_HASH, FOSSIL-SCM_SITE and FOSSIL-SCM_SOURCE define
- # the upstream location of the source code for the package.
- # FOSSIL-SCM_DIR is the directory which is created when the source
- # archive is unpacked.
- # FOSSIL-SCM_UNZIP is the command used to unzip the source.
- # It is usually "zcat" (for .gz) or "bzcat" (for .bz2)
- #
- # You should change all these variables to suit your package.
- # Please make sure that you add a description, and that you
- # list all your packages' dependencies, seperated by commas.
- #
- # If you list yourself as MAINTAINER, please give a valid email
- # address, and indicate your irc nick if it cannot be easily deduced
- # from your name or email address. If you leave MAINTAINER set to
- # "NSLU2 Linux" other developers will feel free to edit.
- #
- FOSSIL-SCM_SITE=http://www.fossil-scm.org
- FOSSIL-SCM_VERSION=20090916
- FOSSIL-SCM_HASH=0eb08b860c
- FOSSIL-SCM_DIR=Fossil-$(FOSSIL-SCM_HASH)
- FOSSIL-SCM_SOURCE=$(FOSSIL-SCM_DIR).zip
- FOSSIL-SCM_UNZIP=unzip
- FOSSIL-SCM_MAINTAINER=NSLU2 Linux <nslu2-linux@yahoogroups.com>
- FOSSIL-SCM_DESCRIPTION=Simple, high-reliability, distributed software configuration management
- FOSSIL-SCM_SECTION=utils
- FOSSIL-SCM_PRIORITY=optional
- FOSSIL-SCM_DEPENDS=zlib
- FOSSIL-SCM_SUGGESTS=
- FOSSIL-SCM_CONFLICTS=
- #
- # FOSSIL-SCM_IPK_VERSION should be incremented when the ipk changes.
- #
- FOSSIL-SCM_IPK_VERSION=1
- #
- # FOSSIL-SCM_CONFFILES should be a list of user-editable files
- #FOSSIL-SCM_CONFFILES=/opt/etc/fossil-scm.conf /opt/etc/init.d/SXXfossil-scm
- #
- # FOSSIL-SCM_PATCHES should list any patches, in the the order in
- # which they should be applied to the source code.
- #
- #FOSSIL-SCM_PATCHES=$(FOSSIL-SCM_SOURCE_DIR)/configure.patch
- #
- # If the compilation of the package requires additional
- # compilation or linking flags, then list them here.
- #
- FOSSIL-SCM_CPPFLAGS=
- FOSSIL-SCM_LDFLAGS=
- #
- # FOSSIL-SCM_BUILD_DIR is the directory in which the build is done.
- # FOSSIL-SCM_SOURCE_DIR is the directory which holds all the
- # patches and ipkg control files.
- # FOSSIL-SCM_IPK_DIR is the directory in which the ipk is built.
- # FOSSIL-SCM_IPK is the name of the resulting ipk files.
- #
- # You should not change any of these variables.
- #
- FOSSIL-SCM_BUILD_DIR=$(BUILD_DIR)/fossil-scm
- FOSSIL-SCM_SOURCE_DIR=$(SOURCE_DIR)/fossil-scm
- FOSSIL-SCM_IPK_DIR=$(BUILD_DIR)/fossil-scm-$(FOSSIL-SCM_VERSION)-ipk
- FOSSIL-SCM_IPK=$(BUILD_DIR)/fossil-scm_$(FOSSIL-SCM_VERSION)-$(FOSSIL-SCM_IPK_VERSION)_$(TARGET_ARCH).ipk
- .PHONY: fossil-scm-source fossil-scm-unpack fossil-scm fossil-scm-stage fossil-scm-ipk fossil-scm-clean fossil-scm-dirclean fossil-scm-check
- #
- # This is the dependency on the source code. If the source is missing,
- # then it will be fetched from the site using wget.
- #
- $(DL_DIR)/$(FOSSIL-SCM_SOURCE):
- $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F)
- # $(WGET) -P $(@D) $(FOSSIL-SCM_SITE)/$(@F)
- #
- # The source code depends on it existing within the download directory.
- # This target will be called by the top level Makefile to download the
- # source code's archive (.tar.gz, .bz2, etc.)
- #
- fossil-scm-source: $(DL_DIR)/$(FOSSIL-SCM_SOURCE) $(FOSSIL-SCM_PATCHES)
- #
- # This target unpacks the source code in the build directory.
- # If the source archive is not .tar.gz or .tar.bz2, then you will need
- # to change the commands here. Patches to the source code are also
- # applied in this target as required.
- #
- # This target also configures the build within the build directory.
- # Flags such as LDFLAGS and CPPFLAGS should be passed into configure
- # and NOT $(MAKE) below. Passing it to configure causes configure to
- # correctly BUILD the Makefile with the right paths, where passing it
- # to Make causes it to override the default search paths of the compiler.
- #
- # If the compilation of the package requires other packages to be staged
- # first, then do that first (e.g. "$(MAKE) <bar>-stage <baz>-stage").
- #
- # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as
- # shown below to make various patches to it.
- #
- $(FOSSIL-SCM_BUILD_DIR)/.configured: $(DL_DIR)/$(FOSSIL-SCM_SOURCE) $(FOSSIL-SCM_PATCHES) make/fossil-scm.mk
- $(MAKE) zlib-stage
- rm -rf $(BUILD_DIR)/$(FOSSIL-SCM_DIR) $(@D)
- cd $(BUILD_DIR) && $(FOSSIL-SCM_UNZIP) $(DL_DIR)/$(FOSSIL-SCM_SOURCE)
- if test -n "$(FOSSIL-SCM_PATCHES)" ; \
- then cat $(FOSSIL-SCM_PATCHES) | \
- patch -d $(BUILD_DIR)/$(FOSSIL-SCM_DIR) -p0 ; \
- fi
- if test "$(BUILD_DIR)/$(FOSSIL-SCM_DIR)" != "$(@D)" ; \
- then mv $(BUILD_DIR)/$(FOSSIL-SCM_DIR) $(@D) ; \
- fi
- # (cd $(@D); \
- $(TARGET_CONFIGURE_OPTS) \
- CPPFLAGS="$(STAGING_CPPFLAGS) $(FOSSIL-SCM_CPPFLAGS)" \
- LDFLAGS="$(STAGING_LDFLAGS) $(FOSSIL-SCM_LDFLAGS)" \
- ./configure \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --target=$(GNU_TARGET_NAME) \
- --prefix=/opt \
- --disable-nls \
- --disable-static \
- )
- # $(PATCH_LIBTOOL) $(@D)/libtool
- touch $@
- fossil-scm-unpack: $(FOSSIL-SCM_BUILD_DIR)/.configured
- #
- # This builds the actual binary.
- #
- $(FOSSIL-SCM_BUILD_DIR)/.built: $(FOSSIL-SCM_BUILD_DIR)/.configured
- rm -f $@
- $(MAKE) -C $(@D) \
- TCC="$(TARGET_CC) -Wall $(STAGING_CPPFLAGS)" \
- LDFLAGS="$(STAGING_LDFLAGS) $(FOSSIL-SCM_LDFLAGS)" \
- ;
- touch $@
- #
- # This is the build convenience target.
- #
- fossil-scm: $(FOSSIL-SCM_BUILD_DIR)/.built
- #
- # If you are building a library, then you need to stage it too.
- #
- #$(FOSSIL-SCM_BUILD_DIR)/.staged: $(FOSSIL-SCM_BUILD_DIR)/.built
- # rm -f $@
- # $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
- # touch $@
- #
- #fossil-scm-stage: $(FOSSIL-SCM_BUILD_DIR)/.staged
- #
- # This rule creates a control file for ipkg. It is no longer
- # necessary to create a seperate control file under sources/fossil-scm
- #
- $(FOSSIL-SCM_IPK_DIR)/CONTROL/control:
- @install -d $(@D)
- @rm -f $@
- @echo "Package: fossil-scm" >>$@
- @echo "Architecture: $(TARGET_ARCH)" >>$@
- @echo "Priority: $(FOSSIL-SCM_PRIORITY)" >>$@
- @echo "Section: $(FOSSIL-SCM_SECTION)" >>$@
- @echo "Version: $(FOSSIL-SCM_VERSION)-$(FOSSIL-SCM_IPK_VERSION)" >>$@
- @echo "Maintainer: $(FOSSIL-SCM_MAINTAINER)" >>$@
- @echo "Source: $(FOSSIL-SCM_SITE)/$(FOSSIL-SCM_SOURCE)" >>$@
- @echo "Description: $(FOSSIL-SCM_DESCRIPTION)" >>$@
- @echo "Depends: $(FOSSIL-SCM_DEPENDS)" >>$@
- @echo "Suggests: $(FOSSIL-SCM_SUGGESTS)" >>$@
- @echo "Conflicts: $(FOSSIL-SCM_CONFLICTS)" >>$@
- #
- # This builds the IPK file.
- #
- # Binaries should be installed into $(FOSSIL-SCM_IPK_DIR)/opt/sbin or $(FOSSIL-SCM_IPK_DIR)/opt/bin
- # (use the location in a well-known Linux distro as a guide for choosing sbin or bin).
- # Libraries and include files should be installed into $(FOSSIL-SCM_IPK_DIR)/opt/{lib,include}
- # Configuration files should be installed in $(FOSSIL-SCM_IPK_DIR)/opt/etc/fossil-scm/...
- # Documentation files should be installed in $(FOSSIL-SCM_IPK_DIR)/opt/doc/fossil-scm/...
- # Daemon startup scripts should be installed in $(FOSSIL-SCM_IPK_DIR)/opt/etc/init.d/S??fossil-scm
- #
- # You may need to patch your application to make it use these locations.
- #
- $(FOSSIL-SCM_IPK): $(FOSSIL-SCM_BUILD_DIR)/.built
- rm -rf $(FOSSIL-SCM_IPK_DIR) $(BUILD_DIR)/fossil-scm_*_$(TARGET_ARCH).ipk
- # $(MAKE) -C $(FOSSIL-SCM_BUILD_DIR) DESTDIR=$(FOSSIL-SCM_IPK_DIR) install-strip
- install -d $(FOSSIL-SCM_IPK_DIR)/opt/bin
- install -m755 $(<D)/fossil $(FOSSIL-SCM_IPK_DIR)/opt/bin
- $(STRIP_COMMAND) $(FOSSIL-SCM_IPK_DIR)/opt/bin/fossil
- $(MAKE) $(FOSSIL-SCM_IPK_DIR)/CONTROL/control
- echo $(FOSSIL-SCM_CONFFILES) | sed -e 's/ /\n/g' > $(FOSSIL-SCM_IPK_DIR)/CONTROL/conffiles
- cd $(BUILD_DIR); $(IPKG_BUILD) $(FOSSIL-SCM_IPK_DIR)
- #
- # This is called from the top level makefile to create the IPK file.
- #
- fossil-scm-ipk: $(FOSSIL-SCM_IPK)
- #
- # This is called from the top level makefile to clean all of the built files.
- #
- fossil-scm-clean:
- rm -f $(FOSSIL-SCM_BUILD_DIR)/.built
- -$(MAKE) -C $(FOSSIL-SCM_BUILD_DIR) clean
- #
- # This is called from the top level makefile to clean all dynamically created
- # directories.
- #
- fossil-scm-dirclean:
- rm -rf $(BUILD_DIR)/$(FOSSIL-SCM_DIR) $(FOSSIL-SCM_BUILD_DIR) $(FOSSIL-SCM_IPK_DIR) $(FOSSIL-SCM_IPK)
- #
- #
- # Some sanity check for the package.
- #
- fossil-scm-check: $(FOSSIL-SCM_IPK)
- perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^