/make/opendchub.mk
Makefile | 242 lines | 104 code | 20 blank | 118 comment | 5 complexity | 34d56f5b2d4df72e7c907d2e4457c5a2 MD5 | raw file
- ###########################################################
- #
- # opendchub
- #
- ###########################################################
- #
- # OPENDCHUB_VERSION, OPENDCHUB_SITE and OPENDCHUB_SOURCE define
- # the upstream location of the source code for the package.
- # OPENDCHUB_DIR is the directory which is created when the source
- # archive is unpacked.
- # OPENDCHUB_UNZIP is the command used to unzip the source.
- # It is usually "zcat" (for .gz) or "bzcat" (for .bz2)
- #
- # You should change all these variables to suit your package.
- # Please make sure that you add a description, and that you
- # list all your packages' dependencies, seperated by commas.
- #
- # If you list yourself as MAINTAINER, please give a valid email
- # address, and indicate your irc nick if it cannot be easily deduced
- # from your name or email address. If you leave MAINTAINER set to
- # "NSLU2 Linux" other developers will feel free to edit.
- #
- OPENDCHUB_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/opendchub
- OPENDCHUB_VERSION=0.7.15
- OPENDCHUB_SOURCE=opendchub-$(OPENDCHUB_VERSION).tar.gz
- OPENDCHUB_DIR=opendchub-$(OPENDCHUB_VERSION)
- OPENDCHUB_UNZIP=zcat
- OPENDCHUB_MAINTAINER=NSLU2 Linux <nslu2-linux@yahoogroups.com>
- OPENDCHUB_DESCRIPTION=Open DC hub is a Unix/Linux version of the hub software for the Direct Connect network.
- OPENDCHUB_SECTION=net
- OPENDCHUB_PRIORITY=optional
- OPENDCHUB_DEPENDS=$(filter perl, $(PACKAGES))
- OPENDCHUB_SUGGESTS=
- OPENDCHUB_CONFLICTS=
- #
- # OPENDCHUB_IPK_VERSION should be incremented when the ipk changes.
- #
- OPENDCHUB_IPK_VERSION=1
- #
- # OPENDCHUB_CONFFILES should be a list of user-editable files
- #OPENDCHUB_CONFFILES=/opt/etc/opendchub.conf /opt/etc/init.d/SXXopendchub
- #
- # OPENDCHUB_PATCHES should list any patches, in the the order in
- # which they should be applied to the source code.
- #
- #OPENDCHUB_PATCHES=$(OPENDCHUB_SOURCE_DIR)/configure.patch
- #
- # If the compilation of the package requires additional
- # compilation or linking flags, then list them here.
- #
- OPENDCHUB_CPPFLAGS=
- OPENDCHUB_LDFLAGS=
- OPENDCHUB_PERL_LDFLAGS = \
- -L$(STAGING_LIB_DIR)/$(PERL_LIB_CORE_DIR) -Wl,-E -lperl -ldl \
- $(if $(filter uclibc, $(LIBC_STYLE)), -lm,) \
- $(if $(filter 5.8, $(PERL_MAJOR_VER)), \
- $(STAGING_LIB_DIR)/perl5/$(PERL_VERSION)/$(PERL_ARCH)/auto/DynaLoader/DynaLoader.a,)
- #
- # OPENDCHUB_BUILD_DIR is the directory in which the build is done.
- # OPENDCHUB_SOURCE_DIR is the directory which holds all the
- # patches and ipkg control files.
- # OPENDCHUB_IPK_DIR is the directory in which the ipk is built.
- # OPENDCHUB_IPK is the name of the resulting ipk files.
- #
- # You should not change any of these variables.
- #
- OPENDCHUB_BUILD_DIR=$(BUILD_DIR)/opendchub
- OPENDCHUB_SOURCE_DIR=$(SOURCE_DIR)/opendchub
- OPENDCHUB_IPK_DIR=$(BUILD_DIR)/opendchub-$(OPENDCHUB_VERSION)-ipk
- OPENDCHUB_IPK=$(BUILD_DIR)/opendchub_$(OPENDCHUB_VERSION)-$(OPENDCHUB_IPK_VERSION)_$(TARGET_ARCH).ipk
- .PHONY: opendchub-source opendchub-unpack opendchub opendchub-stage opendchub-ipk opendchub-clean opendchub-dirclean opendchub-check
- #
- # This is the dependency on the source code. If the source is missing,
- # then it will be fetched from the site using wget.
- #
- $(DL_DIR)/$(OPENDCHUB_SOURCE):
- $(WGET) -P $(@D) $(OPENDCHUB_SITE)/$(@F) || \
- $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F)
- #
- # The source code depends on it existing within the download directory.
- # This target will be called by the top level Makefile to download the
- # source code's archive (.tar.gz, .bz2, etc.)
- #
- opendchub-source: $(DL_DIR)/$(OPENDCHUB_SOURCE) $(OPENDCHUB_PATCHES)
- #
- # This target unpacks the source code in the build directory.
- # If the source archive is not .tar.gz or .tar.bz2, then you will need
- # to change the commands here. Patches to the source code are also
- # applied in this target as required.
- #
- # This target also configures the build within the build directory.
- # Flags such as LDFLAGS and CPPFLAGS should be passed into configure
- # and NOT $(MAKE) below. Passing it to configure causes configure to
- # correctly BUILD the Makefile with the right paths, where passing it
- # to Make causes it to override the default search paths of the compiler.
- #
- # If the compilation of the package requires other packages to be staged
- # first, then do that first (e.g. "$(MAKE) <bar>-stage <baz>-stage").
- #
- # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as
- # shown below to make various patches to it.
- #
- $(OPENDCHUB_BUILD_DIR)/.configured: $(DL_DIR)/$(OPENDCHUB_SOURCE) $(OPENDCHUB_PATCHES) make/opendchub.mk
- ifeq (perl, $(filter perl, $(PACKAGES)))
- $(MAKE) perl-stage
- endif
- rm -rf $(BUILD_DIR)/$(OPENDCHUB_DIR) $(@D)
- $(OPENDCHUB_UNZIP) $(DL_DIR)/$(OPENDCHUB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- if test -n "$(OPENDCHUB_PATCHES)" ; \
- then cat $(OPENDCHUB_PATCHES) | \
- patch -d $(BUILD_DIR)/$(OPENDCHUB_DIR) -p0 ; \
- fi
- if test "$(BUILD_DIR)/$(OPENDCHUB_DIR)" != "$(@D)" ; \
- then mv $(BUILD_DIR)/$(OPENDCHUB_DIR) $(@D) ; \
- fi
- (cd $(@D); \
- $(TARGET_CONFIGURE_OPTS) \
- CPPFLAGS="$(STAGING_CPPFLAGS) $(OPENDCHUB_CPPFLAGS)" \
- LDFLAGS="$(STAGING_LDFLAGS) $(OPENDCHUB_LDFLAGS)" \
- ./configure \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --target=$(GNU_TARGET_NAME) \
- $(if $(filter perl, $(PACKAGES)),,--disable-perl) \
- --prefix=/opt \
- --disable-nls \
- --disable-static \
- )
- # $(PATCH_LIBTOOL) $(@D)/libtool
- touch $@
- opendchub-unpack: $(OPENDCHUB_BUILD_DIR)/.configured
- #
- # This builds the actual binary.
- #
- $(OPENDCHUB_BUILD_DIR)/.built: $(OPENDCHUB_BUILD_DIR)/.configured
- rm -f $@
- $(MAKE) -C $(@D) \
- perl_flags="-I$(STAGING_LIB_DIR)/$(PERL_LIB_CORE_DIR)" \
- perl_libs="$(PERL_LDFLAGS) $(OPENDCHUB_PERL_LDFLAGS)" \
- ;
- touch $@
- #
- # This is the build convenience target.
- #
- opendchub: $(OPENDCHUB_BUILD_DIR)/.built
- #
- # If you are building a library, then you need to stage it too.
- #
- $(OPENDCHUB_BUILD_DIR)/.staged: $(OPENDCHUB_BUILD_DIR)/.built
- rm -f $@
- $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
- touch $@
- opendchub-stage: $(OPENDCHUB_BUILD_DIR)/.staged
- #
- # This rule creates a control file for ipkg. It is no longer
- # necessary to create a seperate control file under sources/opendchub
- #
- $(OPENDCHUB_IPK_DIR)/CONTROL/control:
- @install -d $(@D)
- @rm -f $@
- @echo "Package: opendchub" >>$@
- @echo "Architecture: $(TARGET_ARCH)" >>$@
- @echo "Priority: $(OPENDCHUB_PRIORITY)" >>$@
- @echo "Section: $(OPENDCHUB_SECTION)" >>$@
- @echo "Version: $(OPENDCHUB_VERSION)-$(OPENDCHUB_IPK_VERSION)" >>$@
- @echo "Maintainer: $(OPENDCHUB_MAINTAINER)" >>$@
- @echo "Source: $(OPENDCHUB_SITE)/$(OPENDCHUB_SOURCE)" >>$@
- @echo "Description: $(OPENDCHUB_DESCRIPTION)" >>$@
- @echo "Depends: $(OPENDCHUB_DEPENDS)" >>$@
- @echo "Suggests: $(OPENDCHUB_SUGGESTS)" >>$@
- @echo "Conflicts: $(OPENDCHUB_CONFLICTS)" >>$@
- #
- # This builds the IPK file.
- #
- # Binaries should be installed into $(OPENDCHUB_IPK_DIR)/opt/sbin or $(OPENDCHUB_IPK_DIR)/opt/bin
- # (use the location in a well-known Linux distro as a guide for choosing sbin or bin).
- # Libraries and include files should be installed into $(OPENDCHUB_IPK_DIR)/opt/{lib,include}
- # Configuration files should be installed in $(OPENDCHUB_IPK_DIR)/opt/etc/opendchub/...
- # Documentation files should be installed in $(OPENDCHUB_IPK_DIR)/opt/doc/opendchub/...
- # Daemon startup scripts should be installed in $(OPENDCHUB_IPK_DIR)/opt/etc/init.d/S??opendchub
- #
- # You may need to patch your application to make it use these locations.
- #
- $(OPENDCHUB_IPK): $(OPENDCHUB_BUILD_DIR)/.built
- rm -rf $(OPENDCHUB_IPK_DIR) $(BUILD_DIR)/opendchub_*_$(TARGET_ARCH).ipk
- $(MAKE) -C $(OPENDCHUB_BUILD_DIR) DESTDIR=$(OPENDCHUB_IPK_DIR) install
- $(STRIP_COMMAND) $(OPENDCHUB_IPK_DIR)/opt/*bin/*
- install -d $(OPENDCHUB_IPK_DIR)/opt/share/doc/opendchub
- install $(OPENDCHUB_BUILD_DIR)/[ACRN]* \
- $(OPENDCHUB_BUILD_DIR)/Documentation/* \
- $(OPENDCHUB_BUILD_DIR)/Samplescripts/* \
- $(OPENDCHUB_IPK_DIR)/opt/share/doc/opendchub/
- # install -d $(OPENDCHUB_IPK_DIR)/opt/etc/
- # install -m 644 $(OPENDCHUB_SOURCE_DIR)/opendchub.conf $(OPENDCHUB_IPK_DIR)/opt/etc/opendchub.conf
- # install -d $(OPENDCHUB_IPK_DIR)/opt/etc/init.d
- # install -m 755 $(OPENDCHUB_SOURCE_DIR)/rc.opendchub $(OPENDCHUB_IPK_DIR)/opt/etc/init.d/SXXopendchub
- # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(OPENDCHUB_IPK_DIR)/opt/etc/init.d/SXXopendchub
- $(MAKE) $(OPENDCHUB_IPK_DIR)/CONTROL/control
- echo $(OPENDCHUB_CONFFILES) | sed -e 's/ /\n/g' > $(OPENDCHUB_IPK_DIR)/CONTROL/conffiles
- cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENDCHUB_IPK_DIR)
- #
- # This is called from the top level makefile to create the IPK file.
- #
- opendchub-ipk: $(OPENDCHUB_IPK)
- #
- # This is called from the top level makefile to clean all of the built files.
- #
- opendchub-clean:
- rm -f $(OPENDCHUB_BUILD_DIR)/.built
- -$(MAKE) -C $(OPENDCHUB_BUILD_DIR) clean
- #
- # This is called from the top level makefile to clean all dynamically created
- # directories.
- #
- opendchub-dirclean:
- rm -rf $(BUILD_DIR)/$(OPENDCHUB_DIR) $(OPENDCHUB_BUILD_DIR) $(OPENDCHUB_IPK_DIR) $(OPENDCHUB_IPK)
- #
- #
- # Some sanity check for the package.
- #
- opendchub-check: $(OPENDCHUB_IPK)
- perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(OPENDCHUB_IPK)