/make/py-hgsubversion.mk
Makefile | 278 lines | 135 code | 25 blank | 118 comment | 4 complexity | 4275fdc9c54453208998135e1bceba32 MD5 | raw file
- ###########################################################
- #
- # py-hgsubversion
- #
- ###########################################################
- #
- # PY-HGSUBVERSION_VERSION, PY-HGSUBVERSION_SITE and PY-HGSUBVERSION_SOURCE define
- # the upstream location of the source code for the package.
- # PY-HGSUBVERSION_DIR is the directory which is created when the source
- # archive is unpacked.
- # PY-HGSUBVERSION_UNZIP is the command used to unzip the source.
- # It is usually "zcat" (for .gz) or "bzcat" (for .bz2)
- #
- # You should change all these variables to suit your package.
- # Please make sure that you add a description, and that you
- # list all your packages' dependencies, seperated by commas.
- #
- # If you list yourself as MAINTAINER, please give a valid email
- # address, and indicate your irc nick if it cannot be easily deduced
- # from your name or email address. If you leave MAINTAINER set to
- # "NSLU2 Linux" other developers will feel free to edit.
- #
- PY-HGSUBVERSION_SITE=http://pypi.python.org/packages/source/h/hgsubversion
- PY-HGSUBVERSION_VERSION=1.2
- PY-HGSUBVERSION_SOURCE=hgsubversion-$(PY-HGSUBVERSION_VERSION).tar.gz
- PY-HGSUBVERSION_DIR=hgsubversion-$(PY-HGSUBVERSION_VERSION)
- PY-HGSUBVERSION_UNZIP=zcat
- PY-HGSUBVERSION_MAINTAINER=NSLU2 Linux <nslu2-linux@yahoogroups.com>
- PY-HGSUBVERSION_DESCRIPTION=hgsubversion is an extension for Mercurial that allows using Mercurial as a Subversion client.
- PY-HGSUBVERSION_SECTION=misc
- PY-HGSUBVERSION_PRIORITY=optional
- PY-HGSUBVERSION_DEPENDS=
- PY25-HGSUBVERSION_DEPENDS=py25-mercurial, svn-py
- PY26-HGSUBVERSION_DEPENDS=py26-mercurial, svn-py
- PY-HGSUBVERSION_CONFLICTS=
- #
- # PY-HGSUBVERSION_IPK_VERSION should be incremented when the ipk changes.
- #
- PY-HGSUBVERSION_IPK_VERSION=1
- #
- # PY-HGSUBVERSION_CONFFILES should be a list of user-editable files
- #PY-HGSUBVERSION_CONFFILES=/opt/etc/py-hgsubversion.conf /opt/etc/init.d/SXXpy-hgsubversion
- #
- # PY-HGSUBVERSION_PATCHES should list any patches, in the the order in
- # which they should be applied to the source code.
- #
- PY-HGSUBVERSION_PATCHES=$(PY-HGSUBVERSION_SOURCE_DIR)/setup-py.patch
- #
- # If the compilation of the package requires additional
- # compilation or linking flags, then list them here.
- #
- PY-HGSUBVERSION_CPPFLAGS=
- PY-HGSUBVERSION_LDFLAGS=
- #
- # PY-HGSUBVERSION_BUILD_DIR is the directory in which the build is done.
- # PY-HGSUBVERSION_SOURCE_DIR is the directory which holds all the
- # patches and ipkg control files.
- # PY-HGSUBVERSION_IPK_DIR is the directory in which the ipk is built.
- # PY-HGSUBVERSION_IPK is the name of the resulting ipk files.
- #
- # You should not change any of these variables.
- #
- PY-HGSUBVERSION_BUILD_DIR=$(BUILD_DIR)/py-hgsubversion
- PY-HGSUBVERSION_SOURCE_DIR=$(SOURCE_DIR)/py-hgsubversion
- #PY-HGSUBVERSION-COMMON_IPK_DIR=$(BUILD_DIR)/py-hgsubversion-common-$(PY-HGSUBVERSION_VERSION)-ipk
- #PY-HGSUBVERSION-COMMON_IPK=$(BUILD_DIR)/py-hgsubversion-common_$(PY-HGSUBVERSION_VERSION)-$(PY-HGSUBVERSION_IPK_VERSION)_$(TARGET_ARCH).ipk
- PY25-HGSUBVERSION_IPK_DIR=$(BUILD_DIR)/py25-hgsubversion-$(PY-HGSUBVERSION_VERSION)-ipk
- PY25-HGSUBVERSION_IPK=$(BUILD_DIR)/py25-hgsubversion_$(PY-HGSUBVERSION_VERSION)-$(PY-HGSUBVERSION_IPK_VERSION)_$(TARGET_ARCH).ipk
- PY26-HGSUBVERSION_IPK_DIR=$(BUILD_DIR)/py26-hgsubversion-$(PY-HGSUBVERSION_VERSION)-ipk
- PY26-HGSUBVERSION_IPK=$(BUILD_DIR)/py26-hgsubversion_$(PY-HGSUBVERSION_VERSION)-$(PY-HGSUBVERSION_IPK_VERSION)_$(TARGET_ARCH).ipk
- .PHONY: py-hgsubversion-source py-hgsubversion-unpack py-hgsubversion py-hgsubversion-stage py-hgsubversion-ipk py-hgsubversion-clean py-hgsubversion-dirclean py-hgsubversion-check
- #
- # This is the dependency on the source code. If the source is missing,
- # then it will be fetched from the site using wget.
- #
- $(DL_DIR)/$(PY-HGSUBVERSION_SOURCE):
- $(WGET) -P $(@D) $(PY-HGSUBVERSION_SITE)/$(@F) || \
- $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F)
- #
- # The source code depends on it existing within the download directory.
- # This target will be called by the top level Makefile to download the
- # source code's archive (.tar.gz, .bz2, etc.)
- #
- py-hgsubversion-source: $(DL_DIR)/$(PY-HGSUBVERSION_SOURCE) $(PY-HGSUBVERSION_PATCHES)
- #
- # This target unpacks the source code in the build directory.
- # If the source archive is not .tar.gz or .tar.bz2, then you will need
- # to change the commands here. Patches to the source code are also
- # applied in this target as required.
- #
- # This target also configures the build within the build directory.
- # Flags such as LDFLAGS and CPPFLAGS should be passed into configure
- # and NOT $(MAKE) below. Passing it to configure causes configure to
- # correctly BUILD the Makefile with the right paths, where passing it
- # to Make causes it to override the default search paths of the compiler.
- #
- # If the compilation of the package requires other packages to be staged
- # first, then do that first (e.g. "$(MAKE) <bar>-stage <baz>-stage").
- #
- $(PY-HGSUBVERSION_BUILD_DIR)/.configured: $(DL_DIR)/$(PY-HGSUBVERSION_SOURCE) $(PY-HGSUBVERSION_PATCHES) make/py-hgsubversion.mk
- $(MAKE) py-setuptools-stage
- rm -rf $(PY-HGSUBVERSION_BUILD_DIR)
- mkdir -p $(PY-HGSUBVERSION_BUILD_DIR)
- # 2.5
- rm -rf $(BUILD_DIR)/$(PY-HGSUBVERSION_DIR)
- $(PY-HGSUBVERSION_UNZIP) $(DL_DIR)/$(PY-HGSUBVERSION_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- if test -n "$(PY-HGSUBVERSION_PATCHES)"; then \
- cat $(PY-HGSUBVERSION_PATCHES) | patch -d $(BUILD_DIR)/$(PY-HGSUBVERSION_DIR) -p1; \
- fi
- mv $(BUILD_DIR)/$(PY-HGSUBVERSION_DIR) $(@D)/2.5
- (cd $(@D)/2.5; \
- ( \
- echo "[build_ext]"; \
- echo "include-dirs=$(STAGING_INCLUDE_DIR):$(STAGING_INCLUDE_DIR)/python2.5"; \
- echo "library-dirs=$(STAGING_LIB_DIR)"; \
- echo "rpath=/opt/lib"; \
- echo "[build_scripts]"; \
- echo "executable=/opt/bin/python2.5" \
- ) >> setup.cfg; \
- )
- # 2.6
- rm -rf $(BUILD_DIR)/$(PY-HGSUBVERSION_DIR)
- $(PY-HGSUBVERSION_UNZIP) $(DL_DIR)/$(PY-HGSUBVERSION_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- if test -n "$(PY-HGSUBVERSION_PATCHES)"; then \
- cat $(PY-HGSUBVERSION_PATCHES) | patch -d $(BUILD_DIR)/$(PY-HGSUBVERSION_DIR) -p1; \
- fi
- mv $(BUILD_DIR)/$(PY-HGSUBVERSION_DIR) $(@D)/2.6
- (cd $(@D)/2.6; \
- ( \
- echo "[build_ext]"; \
- echo "include-dirs=$(STAGING_INCLUDE_DIR):$(STAGING_INCLUDE_DIR)/python2.6"; \
- echo "library-dirs=$(STAGING_LIB_DIR)"; \
- echo "rpath=/opt/lib"; \
- echo "[build_scripts]"; \
- echo "executable=/opt/bin/python2.6" \
- ) >> setup.cfg; \
- )
- touch $@
- py-hgsubversion-unpack: $(PY-HGSUBVERSION_BUILD_DIR)/.configured
- #
- # This builds the actual binary.
- #
- $(PY-HGSUBVERSION_BUILD_DIR)/.built: $(PY-HGSUBVERSION_BUILD_DIR)/.configured
- rm -f $@
- (cd $(@D)/2.5; \
- CC='$(TARGET_CC)' LDSHARED='$(TARGET_CC) -shared' \
- PYTHONPATH=$(STAGING_LIB_DIR)/python2.5/site-packages \
- $(HOST_STAGING_PREFIX)/bin/python2.5 setup.py build \
- ; \
- )
- (cd $(@D)/2.6; \
- CC='$(TARGET_CC)' LDSHARED='$(TARGET_CC) -shared' \
- PYTHONPATH=$(STAGING_LIB_DIR)/python2.6/site-packages \
- $(HOST_STAGING_PREFIX)/bin/python2.6 setup.py build \
- ; \
- )
- touch $@
- #
- # This is the build convenience target.
- #
- py-hgsubversion: $(PY-HGSUBVERSION_BUILD_DIR)/.built
- #
- # If you are building a library, then you need to stage it too.
- #
- #$(PY-HGSUBVERSION_BUILD_DIR)/.staged: $(PY-HGSUBVERSION_BUILD_DIR)/.built
- # rm -f $@
- # $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
- # touch $@
- #
- #py-hgsubversion-stage: $(PY-HGSUBVERSION_BUILD_DIR)/.staged
- #
- # This rule creates a control file for ipkg. It is no longer
- # necessary to create a seperate control file under sources/py-hgsubversion
- #
- $(PY25-HGSUBVERSION_IPK_DIR)/CONTROL/control:
- @install -d $(@D)
- @rm -f $@
- @echo "Package: py25-hgsubversion" >>$@
- @echo "Architecture: $(TARGET_ARCH)" >>$@
- @echo "Priority: $(PY-HGSUBVERSION_PRIORITY)" >>$@
- @echo "Section: $(PY-HGSUBVERSION_SECTION)" >>$@
- @echo "Version: $(PY-HGSUBVERSION_VERSION)-$(PY-HGSUBVERSION_IPK_VERSION)" >>$@
- @echo "Maintainer: $(PY-HGSUBVERSION_MAINTAINER)" >>$@
- @echo "Source: $(PY-HGSUBVERSION_SITE)/$(PY-HGSUBVERSION_SOURCE)" >>$@
- @echo "Description: $(PY-HGSUBVERSION_DESCRIPTION)" >>$@
- @echo "Depends: $(PY25-HGSUBVERSION_DEPENDS)" >>$@
- @echo "Conflicts: $(PY-HGSUBVERSION_CONFLICTS)" >>$@
- $(PY26-HGSUBVERSION_IPK_DIR)/CONTROL/control:
- @install -d $(@D)
- @rm -f $@
- @echo "Package: py26-hgsubversion" >>$@
- @echo "Architecture: $(TARGET_ARCH)" >>$@
- @echo "Priority: $(PY-HGSUBVERSION_PRIORITY)" >>$@
- @echo "Section: $(PY-HGSUBVERSION_SECTION)" >>$@
- @echo "Version: $(PY-HGSUBVERSION_VERSION)-$(PY-HGSUBVERSION_IPK_VERSION)" >>$@
- @echo "Maintainer: $(PY-HGSUBVERSION_MAINTAINER)" >>$@
- @echo "Source: $(PY-HGSUBVERSION_SITE)/$(PY-HGSUBVERSION_SOURCE)" >>$@
- @echo "Description: $(PY-HGSUBVERSION_DESCRIPTION)" >>$@
- @echo "Depends: $(PY26-HGSUBVERSION_DEPENDS)" >>$@
- @echo "Conflicts: $(PY-HGSUBVERSION_CONFLICTS)" >>$@
- #
- # This builds the IPK file.
- #
- # Binaries should be installed into $(PY-HGSUBVERSION_IPK_DIR)/opt/sbin or $(PY-HGSUBVERSION_IPK_DIR)/opt/bin
- # (use the location in a well-known Linux distro as a guide for choosing sbin or bin).
- # Libraries and include files should be installed into $(PY-HGSUBVERSION_IPK_DIR)/opt/{lib,include}
- # Configuration files should be installed in $(PY-HGSUBVERSION_IPK_DIR)/opt/etc/py-hgsubversion/...
- # Documentation files should be installed in $(PY-HGSUBVERSION_IPK_DIR)/opt/doc/py-hgsubversion/...
- # Daemon startup scripts should be installed in $(PY-HGSUBVERSION_IPK_DIR)/opt/etc/init.d/S??py-hgsubversion
- #
- # You may need to patch your application to make it use these locations.
- #
- $(PY25-HGSUBVERSION_IPK): $(PY-HGSUBVERSION_BUILD_DIR)/.built
- rm -f $(BUILD_DIR)/py*-hgsubversion_*_$(TARGET_ARCH).ipk
- rm -rf $(PY25-HGSUBVERSION_IPK_DIR) $(BUILD_DIR)/py25-hgsubversion_*_$(TARGET_ARCH).ipk
- (cd $(PY-HGSUBVERSION_BUILD_DIR)/2.5; \
- PYTHONPATH=$(STAGING_LIB_DIR)/python2.5/site-packages \
- $(HOST_STAGING_PREFIX)/bin/python2.5 setup.py install \
- --root=$(PY25-HGSUBVERSION_IPK_DIR) --prefix=/opt; \
- )
- $(MAKE) $(PY25-HGSUBVERSION_IPK_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(PY25-HGSUBVERSION_IPK_DIR)
- $(PY26-HGSUBVERSION_IPK): $(PY-HGSUBVERSION_BUILD_DIR)/.built
- rm -rf $(PY26-HGSUBVERSION_IPK_DIR) $(BUILD_DIR)/py26-hgsubversion_*_$(TARGET_ARCH).ipk
- (cd $(PY-HGSUBVERSION_BUILD_DIR)/2.6; \
- PYTHONPATH=$(STAGING_LIB_DIR)/python2.6/site-packages \
- $(HOST_STAGING_PREFIX)/bin/python2.6 setup.py install \
- --root=$(PY26-HGSUBVERSION_IPK_DIR) --prefix=/opt; \
- )
- $(MAKE) $(PY26-HGSUBVERSION_IPK_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(PY26-HGSUBVERSION_IPK_DIR)
- #
- # This is called from the top level makefile to create the IPK file.
- #
- py-hgsubversion-ipk: $(PY25-HGSUBVERSION_IPK)
- #
- # This is called from the top level makefile to clean all of the built files.
- #
- py-hgsubversion-clean:
- -$(MAKE) -C $(PY-HGSUBVERSION_BUILD_DIR) clean
- #
- # This is called from the top level makefile to clean all dynamically created
- # directories.
- #
- py-hgsubversion-dirclean:
- rm -rf $(BUILD_DIR)/$(PY-HGSUBVERSION_DIR) $(PY-HGSUBVERSION_BUILD_DIR)
- rm -rf $(PY25-HGSUBVERSION_IPK_DIR) $(PY25-HGSUBVERSION_IPK)
- # rm -rf $(PY26-HGSUBVERSION_IPK_DIR) $(PY26-HGSUBVERSION_IPK)
- #
- # Some sanity check for the package.
- #
- py-hgsubversion-check: $(PY25-HGSUBVERSION_IPK)
- perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^