PageRenderTime 40ms queryFilters 1ms Sphinxql 356ms app.CodeModel.GetByIds 26ms findMatchingLines 72ms GetByIds 98ms meta 0ms repositoryFilters 15ms languageFilters 22ms sourceFilters 9ms

5,840,503 results for 'ERROR repo:browndeer/lammps-ocl' (40 ms)

Source

Language

Repository

simple.el https://bitbucket.org/fangzhzh/temp | Lisp | 6,545 lines
253   (if (and next-error-last-buffer
254            (next-error-buffer-p next-error-last-buffer avoid-current
255                                 extra-test-inclusive extra-test-exclusive))
2330
2331If there is output and an error, a message about the error
2332appears at the end of the output.
2350If it is nil, error output is mingled with regular output.
2351If DISPLAY-ERROR-BUFFER is non-nil, display the error buffer if there
2352were any errors.  (This is always t, interactively.)
2465
2466    (when (and error-file (file-exists-p error-file))
2467      (if (< 0 (nth 7 (file-attributes error-file)))
3507
3508(put 'mark-inactive 'error-conditions '(mark-inactive error))
3509(put 'mark-inactive 'error-message "The mark is not active now")
STSTemplateEngine.m https://bitbucket.org/sunrisetel.co.jp/sts-template-engine | Objective C | 1,610 lines
1198					// this is an error - create a new error description
1199					error = [TEError error:TE_UNEXPECTED_TOKEN_ERROR
1200									inLine:lineNumber atToken:TE_ENDIF];
1219						// this is an error - create a new error description
1220						error = [TEError error:TE_MISSING_IDENTIFIER_AFTER_TOKEN_ERROR
1221										inLine:lineNumber atToken:TE_DEFINE];
1247						// this is an error - create a new error description
1248						error = [TEError error:TE_MISSING_IDENTIFIER_AFTER_TOKEN_ERROR
1249										inLine:lineNumber atToken:TE_UNDEF];
1299					// this is not implemented yet
1300					error = [TEError error:TE_UNIMPLEMENTED_TOKEN_ERROR
1301									inLine:lineNumber atToken:TE_ECHO];
1541						// create error description - file not found
1542						error = [TEError error:TE_FILE_NOT_FOUND_ERROR inLine:0 atToken:TE_PATH];
1543						break;
input_output_hdf5.f90 https://bitbucket.org/kwmsmith/kaw-sim-hdf5 | FORTRAN Modern | 820 lines
47
48    subroutine check_restart_params(fname, input_params, error)
49        character(*), intent(in) :: fname
50        type(input_params_t), intent(inout) :: input_params
51        integer, intent(out) :: error
52        integer :: errbuf(1), ierr
55
56        error = 0
57
59
60            call load_params_hdf5(fname, hdf5_input_params, error)
61
61
62            error = 0
63            ! we only allow NSTEPS to change, everything else must be the same.
y.output https://bitbucket.org/mprateek/occ | Unknown | 17,657 lines
416  322                          | struct_or_union error '{' error error IDENTIFIER error '}'
417  323                          | struct_or_union error '{' error error IDENTIFIER error error
418  324                          | struct_or_union '{' DEFS '(' IDENTIFIER ')' error
2468  322                          | struct_or_union error . '{' error error IDENTIFIER error '}'
2469  323                          | struct_or_union error . '{' error error IDENTIFIER error error
2470  328                          | struct_or_union error . DEFS '(' IDENTIFIER ')' '}'
3966  322                          | struct_or_union error '{' . error error IDENTIFIER error '}'
3967  323                          | struct_or_union error '{' . error error IDENTIFIER error error
3968
6881  322                          | struct_or_union error '{' error . error IDENTIFIER error '}'
6882  323                          | struct_or_union error '{' error . error IDENTIFIER error error
6883
10972  322                          | struct_or_union error '{' error error . IDENTIFIER error '}'
10973  323                          | struct_or_union error '{' error error . IDENTIFIER error error
10974
patch-src_extension_internal_pdfinput_pdf-parser_cpp https://bitbucket.org/bonetruck/openbsd-ports-tree | Unknown | 632 lines
10       if (!obj2.isStream()) {
11-	error(-1, const_cast<char*>("Weird page contents"));
12+	error(errInternal, -1, const_cast<char*>("Weird page contents"));
18   } else if (!obj->isStream()) {
19-    error(-1, const_cast<char*>("Weird page contents"));
20+    error(errInternal, -1, const_cast<char*>("Weird page contents"));
27     } else {
28-      error(getPos(), const_cast<char*>("Too many args in content stream"));
29+      error(errInternal, getPos(), const_cast<char*>("Too many args in content stream"));
36   if (numArgs > 0) {
37-    error(getPos(), const_cast<char*>("Leftover args in content stream"));
38+    error(errInternal, getPos(), const_cast<char*>("Leftover args in content stream"));
45     if (ignoreUndef == 0)
46-      error(getPos(), const_cast<char*>("Unknown operator '%s'"), name);
47+      error(errInternal, getPos(), const_cast<char*>("Unknown operator '%s'"), name);
test-harness.el https://bitbucket.org/jsparkes/xemacs-gtk | Lisp | 773 lines
91
92(defvar test-harness-unexpected-error-enter-debugger debug-on-error
93  "*Non-nil means enter debugger when an unexpected error occurs.
225		test-harness-unexpected-error-enter-debugger)
226	   (funcall debugger 'error error-info))
227	  (test-harness-unexpected-error-show-backtrace
466
467      (defmacro Check-Error-Message (expected-error expected-error-regexp
468						    &rest body)
488		  (Print-Failure "%S ==> got error %S as expected, but error message %S did not match regexp %S"
489				 ,quoted-body ',expected-error error-message ,expected-error-regexp)
490		  (incf wrong-error-failures))))
647	   (error
648	    (test-harness-report-error error-info)))
649       (save-excursion
devdraw.c https://bitbucket.org/rminnich/sysfromiso | C | 2,087 lines
3#include	"compat.h"
4#include	"error.h"
5
515	}
516	error(Enodrawscreen);
517	return 0;
624	}
625	error(Enodrawimage);
626
710	if(d == 0)
711		error(Enodrawimage);
712	if(d->id == id){
1335		if(fmt) printmesg(fmt, a, 1);
1336	/*	iprint("error: %s\n", up->error);	*/
1337		nexterror();
9p2.c https://bitbucket.org/rminnich/sysfromiso | C | 1,866 lines
5static void
6seterror(Fcall *ou, int err)
7{
235	long raddr;
236	int error, u;
237
244	if(file == nil){
245		error = Efidinuse;
246		goto out;
251		if(strcmp(f->uname, "adm") == 0){
252			error = Eauth;
253			goto out;
1833			if(error >= MAXERR){
1834				snprint(ename, sizeof(ename), "error %d", error);
1835				r.ename = ename;
9p2.c https://bitbucket.org/rminnich/sysfromiso | C | 1,862 lines
112	/*
113	 * Return error or 0 if OK.
114	 */
170
171	error = 0;
172	aname = f->aname;
180	if(file == nil){
181		error = Efidinuse;
182		goto out;
185	if(fs == nil){
186		error = Ebadspc;
187		goto out;
1812		if(error >= MAXERR){
1813			snprint(ename, sizeof(ename), "error %d", error);
1814			r.ename = ename;
devdraw.c https://bitbucket.org/rminnich/sysfromiso | C | 2,204 lines
5#include	"fns.h"
6#include	"../port/error.h"
7
489			if(checkname && !drawgoodname(d))
490				error(Eoldname);
491			return d;
524	}
525	error(Enodrawscreen);
526	return 0;
644	}
645	error(Enodrawimage);
646
730	if(d == 0)
731		error(Enodrawimage);
732	if(d->id == id){
WarcHeaderVersionTest.java https://bitbucket.org/moabrichard/jhove2 | Java | 307 lines
214					"[ERROR/OBJECT] Invalid Data before WARC version",
215					"[ERROR/OBJECT] Error in WARC file, expected 'One or more records'"
216			}},
219					"[ERROR/OBJECT] Invalid Data before WARC version",
220					"[ERROR/OBJECT] Error in WARC file, expected 'One or more records'"
221			}},
224					"[ERROR/OBJECT] Invalid Data before WARC version",
225					"[ERROR/OBJECT] Error in WARC file, expected 'One or more records'"
226			}},
229					"[ERROR/OBJECT] Invalid Data before WARC version",
230					"[ERROR/OBJECT] Error in WARC file, expected 'One or more records'"
231			}},
234					"[ERROR/OBJECT] Invalid Empty lines before WARC version",
235					"[ERROR/OBJECT] Error in WARC file, expected 'One or more records'"
236			}},
ArcVersionHeaderTest.java https://bitbucket.org/moabrichard/jhove2 | Java | 331 lines
63					{
64						"[ERROR/OBJECT] Error in ARC version block, reason 'Version line empty'",
65						"[ERROR/OBJECT] Error in ARC version block, reason 'Block definition empty'",
65						"[ERROR/OBJECT] Error in ARC version block, reason 'Block definition empty'",
66						"[ERROR/OBJECT] Error in ARC version block, reason 'Version block is not valid!'"
67					}
71					{
72						"[ERROR/OBJECT] Error in ARC version block, reason 'Version line empty'",
73						"[ERROR/OBJECT] Error in ARC version block, reason 'Block definition empty'",
211						"[ERROR/OBJECT] Invalid ARC version block",
212						"[ERROR/OBJECT] Error in ARC version block, reason 'Version block is not valid!'"
213					}
288						"[ERROR/OBJECT] Invalid ARC version block",
289						"[ERROR/OBJECT] Error in ARC version block, reason 'Version block is not valid!'"
290					}
ff_file.c https://bitbucket.org/arty/arty-newcc-reactos | C | 1,768 lines
147 *
148 *	@return	NULL pointer on Error, in which case pError should be checked for more information.
149 *	@return	pError can be:
151#ifdef FF_UNICODE_SUPPORT
152FF_FILE *FF_Open(FF_IOMAN *pIoman, const FF_T_WCHAR *path, FF_T_UINT8 Mode, FF_ERROR *pError) {
153#else
252					if(pError) {
253						*pError = Error;
254					}
1643	
1644	FF_ERROR	Error;
1645
1717	FF_DIRENT	OriginalEntry;
1718	FF_ERROR	Error;
1719
quickfix.txt https://bitbucket.org/serge.smolau/vim | Unknown | 1,444 lines
150							*:cf* *:cfile*
151:cf[ile][!] [errorfile]	Read the error file and jump to the first error.
152			This is done automatically when Vim is started with
174							*:caddf* *:caddfile*
175:caddf[ile] [errorfile]	Read the error file and add the errors from the
176			errorfile to the current quickfix list. If a quickfix
1033  setlocal efm=aa,bb,cc,dd,ee
1034Where aa, bb, etc. are error format strings.  Each line of the error file will
1035be matched to the pattern aa, then bb, then cc, etc.  Just because cc matched
1078to parse even nested files like in the following line:
1079  {"file1" {"file2" error1} error2 {"file3" error3 {"file4" error4 error5}}}
1080The %O then parses over strings that do not contain any push/pop file name
1153
1154	filename>linenumber:columnnumber:errortype:errornumber:errormessage
1155
chkconf.h https://bitbucket.org/proglove/tbmmorpg | C++ Header | 1,688 lines
32   requires BAR and BAR is not set: we can either silently define BAR
33   (default, recommended) or give an error and abort (mainly useful for
34   developers only)
35 */
36#define wxABORT_ON_CONFIG_ERROR
37
74       to be defined on other platforms */
75#   if defined(wxABORT_ON_CONFIG_ERROR) && defined(__WXMSW__)
76#       error "wxUSE_CRASHREPORT must be defined."
82#ifndef wxUSE_DYNLIB_CLASS
83#   ifdef wxABORT_ON_CONFIG_ERROR
84#       error "wxUSE_DYNLIB_CLASS must be defined."
90#ifndef wxUSE_EXCEPTIONS
91#   ifdef wxABORT_ON_CONFIG_ERROR
92#       error "wxUSE_EXCEPTIONS must be defined."
BuildLog.htm https://bitbucket.org/proglove/tbmmorpg | HTML | 368 lines
47ExceptionManager.cpp
48\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\ExceptionManager.cpp(326) : error C2039: �getFileName� : ??�CEGUI::Exception�???
49        e:\????\???\client\cegui\cegui\include\CEGUIExceptions.h(40) : ??�CEGUI::Exception�???
49        e:\????\???\client\cegui\cegui\include\CEGUIExceptions.h(40) : ??�CEGUI::Exception�???
50\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\ExceptionManager.cpp(326) : error C2039: �getLine� : ??�CEGUI::Exception�???
51        e:\????\???\client\cegui\cegui\include\CEGUIExceptions.h(40) : ??�CEGUI::Exception�???
52WindowBox.cpp
53\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(128) : error C2679: ???�=� : ??????�<??>�???????????(?????????)
54\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(129) : error C2679: ???�=� : ??????�<??>�???????????(?????????)
54\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(129) : error C2679: ???�=� : ??????�<??>�???????????(?????????)
55\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(130) : error C2677: ???�/� : ??????�CEGUI::UDim�????????(?????????)
56\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(137) : error C2679: ???�=� : ??????�<??>�???????????(?????????)
56\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(137) : error C2679: ???�=� : ??????�<??>�???????????(?????????)
57\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(138) : error C2679: ???�=� : ??????�<??>�???????????(?????????)
58\????\???\Client\Cegui\CELayoutEditor-v0-6-3\src\WindowBox.cpp(139) : error C2677: ???�/� : ??????�CEGUI::UDim�????????(?????????)
cfg.y https://bitbucket.org/viraptor/opensips-mirror | yacc | 2,511 lines
450		| statement {}
451		| statements error { yyerror(""); YYABORT;}
452	;
578		| LOGSTDERROR EQUAL NUMBER { if (!config_check) log_stderr=$3; }
579		| LOGSTDERROR EQUAL error { yyerror("boolean value expected"); }
580		| LOGFACILITY EQUAL ID {
1454					}
1455		| ROUTE_ERROR error { yyerror("invalid error_route statement"); }
1456	;
1715						}
1716	| host DOT error { $$=0; pkg_free($1); yyerror("invalid hostname (use quotes if hostname has config keywords)"); }
1717	;
2121		| ERROR error { $$=0; yyerror("missing '(' or ')' ?"); }
2122		| ERROR LPAREN error RPAREN { $$=0; yyerror("bad error"
2123														"argument"); }
cfg.y https://bitbucket.org/Gradwell/opensips-clone | yacc | 2,908 lines
485		| statement {}
486		| statements error { yyerror(""); YYABORT;}
487	;
625		| LOGSTDERROR EQUAL NUMBER { if (!config_check) log_stderr=$3; }
626		| LOGSTDERROR EQUAL error { yyerror("boolean value expected"); }
627		| LOGFACILITY EQUAL ID {
1622					}
1623		| ROUTE_ERROR error { yyerror("invalid error_route statement"); }
1624	;
1840								}
1841		| DSTIP strop error { $$=0; yyerror( "ip address or hostname"
1842						 			"expected" ); }
2387		| ERROR error { $$=0; yyerror("missing '(' or ')' ?"); }
2388		| ERROR LPAREN error RPAREN { $$=0; yyerror("bad error"
2389														"argument"); }
Document1.txt https://bitbucket.org/petermr/patents | Unknown | 70 lines
2OPSIN initialised
3ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title as compound nullEXAMPLE 1.xml
4ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: 1:1 mixture of 1-(7-{[(3,5-dichlorobenzyl)amino]carbonyl}-8-hydroxy-1,6-naphthyridin-5-yl)-1H-imidazo[4,5-b]pyridine and 3-(7-{[(3,5-dichlorobenzyl)amino]carbonyl}-8-hydroxy-1,6-naphthyridin-5-yl)-3H-imidazo[4,5-b]pyridineEXAMPLE 101.xml
4ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: 1:1 mixture of 1-(7-{[(3,5-dichlorobenzyl)amino]carbonyl}-8-hydroxy-1,6-naphthyridin-5-yl)-1H-imidazo[4,5-b]pyridine and 3-(7-{[(3,5-dichlorobenzyl)amino]carbonyl}-8-hydroxy-1,6-naphthyridin-5-yl)-3H-imidazo[4,5-b]pyridineEXAMPLE 101.xml
5ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: 2-(7-{[(3,5-dichlorobenzyl)amino]carbonyl}-8-hydroxy-1,6-naphthyridin-5-yl)octahydropyrrolo[1,2-?]pyrazineEXAMPLE 106.xml
6ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: 8-Hydroxy-5-(3-morpholin-4-yl-prop-1-ynyl)-[1,6]naphthyridine-7-carboxylic acid 3,5-dichloro-benzylamideEXAMPLE 110.xml
6ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: 8-Hydroxy-5-(3-morpholin-4-yl-prop-1-ynyl)-[1,6]naphthyridine-7-carboxylic acid 3,5-dichloro-benzylamideEXAMPLE 110.xml
7ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title as compound nullEXAMPLE 112.xml
8ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title as compound nullEXAMPLE 113.xml
8ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title as compound nullEXAMPLE 113.xml
9ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: 8-hydroxy-5-phenylsulfanyl-[1,6]naphthyridine-7-carboxylic acid 2-methylsulfanylbenzylamideEXAMPLE 114.xml
10ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title as compound nullEXAMPLE 115.xml
10ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title as compound nullEXAMPLE 115.xml
11ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: N-(3,5-dichlorobenzyl)-8-hydroxy-5-[(1H-imidazol-4-ylethyl)anfno]-1,6-naphthyridine-7-carboxamideEXAMPLE 118.xml
12ERROR org.xmlcml.cml.patents.EPOExample - error Cannot parse title: 8 N-(2-chlorobenzyl)-8-hydroxy-1,6-naphthyridine-7-carboxamideEXAMPLE 12.xml
db_update.php https://bitbucket.org/delroth/fluxbb-djangofr | PHP | 1,693 lines
118// Check current version
119$result = $db->query('SELECT conf_value FROM '.$db->prefix.'config WHERE conf_name=\'o_cur_version\'') or error('Unable to fetch version info.', __FILE__, __LINE__, $db->error());
120$cur_version = $db->result($result);
382
383			$db->query('INSERT INTO '.$table.'_utf8('.implode(',', array_keys($temp)).') VALUES ('.implode(',', array_values($temp)).')') or ($error_callback === null ? error('Unable to insert data to new table', __FILE__, __LINE__, $db->error()) : call_user_func($error_callback, $cur_item));
384
611		if (!array_key_exists('o_smtp_ssl', $pun_config))
612			$db->query('INSERT INTO '.$db->prefix.'config (conf_name, conf_value) VALUES (\'o_smtp_ssl\', \'0\')') or error('Unable to insert config value \'o_smtp_ssl\'', __FILE__, __LINE__, $db->error());
613
1629		// And the parser revision number
1630		$db->query('UPDATE '.$db->prefix.'config SET conf_value = \''.UPDATE_TO_PARSER_REVISION.'\' WHERE conf_name = \'o_parser_revision\'') or error('Unable to update parser revision number', __FILE__, __LINE__, $db->error());
1631
1633		if (!file_exists(PUN_ROOT.'lang/'.$pun_config['o_default_lang'].'/common.php'))
1634			$db->query('UPDATE '.$db->prefix.'config SET conf_value = \'English\' WHERE conf_name = \'o_default_lang\'') or error('Unable to update default language', __FILE__, __LINE__, $db->error());
1635
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21