PageRenderTime 20ms queryFilters 0ms Sphinxql 381ms app.CodeModel.GetByIds 53ms findMatchingLines 72ms GetByIds 125ms meta 0ms repositoryFilters 12ms languageFilters 10ms sourceFilters 4ms

5,840,503 results for 'ERROR repo:bioperl/bioperl-live' (20 ms)

Source

Language

Repository

nfs3xdr.c https://bitbucket.org/digetx/picasso-kernel.git | C | 2,546 lines
26
27/* Mapping from NFS error code to "errno" error code. */
28#define errno_NFSERR_IO		EIO
777		goto out;
778	error = decode_post_op_attr(xdr, fattr);
779out:
1341	BUG_ON(error < 0);
1342	error = nfsacl_encode(xdr->buf, base + error, args->inode,
1343			    (args->mask & NFS_DFACL) ?
1454	enum nfs_stat status;
1455	int error;
1456
2362		aclcnt = &result->acl_default_count;
2363	error = nfsacl_decode(xdr->buf, hdrlen + error, aclcnt, acl);
2364	if (unlikely(error <= 0))
xattr.c https://bitbucket.org/digetx/picasso-kernel.git | C | 1,505 lines
81	struct gfs2_ea_header *ea, *prev = NULL;
82	int error = 0;
83
96		error = ea_call(ip, bh, ea, prev, data);
97		if (error)
98			return error;
107
108	return error;
109
118	__be64 *eablk, *end;
119	int error;
120
337
338	error = ea_dealloc_unstuffed(ip, bh, ea, prev, (leave) ? &error : NULL);
339
quota.c https://bitbucket.org/digetx/picasso-kernel.git | C | 1,643 lines
1347
1348static void quotad_error(struct gfs2_sbd *sdp, const char *msg, int error)
1349{
1349{
1350	if (error == 0 || error == -EROFS)
1351		return;
1352	if (!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
1353		fs_err(sdp, "gfs2_quotad: %s error %d\n", msg, error);
1354}
1362		int error = fxn(sdp->sd_vfs, 0);
1363		quotad_error(sdp, msg, error);
1364		*timeo = gfs2_tune_get_i(&sdp->sd_tune, new_timeo) * HZ;
1417			int error = gfs2_statfs_sync(sdp->sd_vfs, 0);
1418			quotad_error(sdp, "statfs", error);
1419			statfs_timeo = gfs2_tune_get(sdp, gt_statfs_quantum) * HZ;
ops_fstype.c https://bitbucket.org/digetx/picasso-kernel.git | C | 1,435 lines
156
157static void end_bio_io_page(struct bio *bio, int error)
158{
163	else
164		printk(KERN_WARNING "gfs2: error %d reading superblock\n", error);
165	unlock_page(page);
194 * @sector: The location of the super block
195 * @error: The error code to return
196 *
746		if (error) {
747			fs_err(sdp, "error recovering my journal: %d\n", error);
748			goto fail_jinode_gh;
1327	args.ar_quota_quantum = 60;
1328	args.ar_errors = GFS2_ERRORS_DEFAULT;
1329
inode.c https://bitbucket.org/digetx/picasso-kernel.git | C | 1,861 lines
136 *
137 * Returns: A VFS inode, or an error
138 */
157
158		error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
159		if (unlikely(error))
162
163		error = gfs2_glock_get(sdp, no_addr, &gfs2_iopen_glops, CREATE, &io_gl);
164		if (unlikely(error))
167		set_bit(GIF_INVALID, &ip->i_flags);
168		error = gfs2_glock_nq_init(io_gl, LM_ST_SHARED, GL_EXACT, &ip->i_iopen_gh);
169		if (unlikely(error))
241	gfs2_glock_dq_uninit(&i_gh);
242	return error ? ERR_PTR(error) : inode;
243fail_iput:
xattr.c https://bitbucket.org/digetx/picasso-kernel.git | C | 1,715 lines
571out:
572	ext4_std_error(inode->i_sb, error);
573	return;
1206		if (error == 0)
1207			error = error2;
1208	}
1481	if (!bh) {
1482		EXT4_ERROR_INODE(inode, "block %llu read error",
1483				 EXT4_I(inode)->i_file_acl);
1548 * Returns 0 if the blocks are equal, 1 if they differ, and
1549 * a negative error number on errors.
1550 */
1613		if (!bh) {
1614			EXT4_ERROR_INODE(inode, "block %lu read error",
1615					 (unsigned long) ce->e_block);
i915_irq.c https://bitbucket.org/digetx/picasso-kernel.git | C | 2,775 lines
978{
979	struct drm_i915_error_state *error = container_of(error_ref,
980							  typeof(*error), ref);
1267	if (INTEL_INFO(dev)->gen >= 6) {
1268		error->error = I915_READ(ERROR_GEN6);
1269		error->done_reg = I915_READ(DONE_REG);
2268
2269	I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
2270
2505	/*
2506	 * Enable some error detection, note the instruction error mask
2507	 * bit is reserved, so we leave it masked.
2509	if (IS_G4X(dev)) {
2510		error_mask = ~(GM45_ERROR_PAGE_TABLE |
2511			       GM45_ERROR_MEM_PRIV |
failoverSCI.cpp https://bitbucket.org/Habibutsu/mysql.git | C++ | 862 lines
27
28sci_error_t             error;
29sci_desc_t              sdOne;
102  sci_query_adapter_t queryAdapter;
103  sci_error_t  error;
104  unsigned int _localNodeId;
314    if (error != SCI_ERR_OK) {
315        fprintf(stderr,"SCICreateMapSequence failed - Error code 0x%x\n",error);
316        return error;
793        }
794        fprintf(stderr,"SCIOpen failed - Error code 0x%x\n",error);
795        exit(error); 
803        }
804        fprintf(stderr,"SCIOpen failed - Error code 0x%x\n",error);
805        exit(error); 
mysqltest.test https://bitbucket.org/Habibutsu/mysql.git | Unknown | 2,940 lines
303# "Maskings" are
304#   --error <error number>  and  --error <error number>
305# in the line before the failing statement.
344--error 1
345--exec echo "disable_abort_on_error; error 1000; select 3 from t1; error 1000; select 3 from t1;" | $MYSQL_TEST  2>&1
346
391--error 1
392--exec echo "disable_abort_on_error; enable_abort_on_error; error 1064; select 3 from t1; select 3 from t1;" | $MYSQL_TEST  2>&1
393
666#--error ER_PARSE_ERROR
667#--error 9,ER_PARSE_ERROR,9,ER_PARSE_ERROR
668#--error 9, ER_PARSE_ERROR,  9,   ER_PARSE_ERROR
669#--error 9,S00000,9,ER_PARSE_ERROR
670#--error 9,S00000,9,ER_PARSE_ERROR,ER_PARSE_ERROR,ER_PARSE_ERROR,9,10,11,12
671--error 9,S00000,9
ai_overflow_error.test https://bitbucket.org/Habibutsu/mysql.git | Unknown | 785 lines
8SHOW CREATE TABLE t1;
9--error 1264
10INSERT INTO t1 VALUES(111111111111111111111111111111111111);
10INSERT INTO t1 VALUES(111111111111111111111111111111111111);
11--error 1264
12INSERT INTO t1 VALUES(-1111111111111111111111111111111111111);
21SHOW CREATE TABLE t1;
22--error 1264
23INSERT INTO t1 VALUES(111111111111111111111111111111111111);
23INSERT INTO t1 VALUES(111111111111111111111111111111111111);
24--error 1264
25INSERT INTO t1 VALUES(-1111111111111111111111111111111111111);
34SHOW CREATE TABLE t1;
35--error 1264
36INSERT INTO t1 VALUES(111111111111111111111111111111111111);
ai_overflow_error.result https://bitbucket.org/Habibutsu/mysql.git | Unknown | 1,082 lines
10INSERT INTO t1 VALUES(111111111111111111111111111111111111);
11ERROR 22003: Out of range value for column 'c1' at row 1
12INSERT INTO t1 VALUES(-1111111111111111111111111111111111111);
12INSERT INTO t1 VALUES(-1111111111111111111111111111111111111);
13ERROR 22003: Out of range value for column 'c1' at row 1
14SELECT * FROM t1;
28INSERT INTO t1 VALUES(111111111111111111111111111111111111);
29ERROR 22003: Out of range value for column 'c1' at row 1
30INSERT INTO t1 VALUES(-1111111111111111111111111111111111111);
30INSERT INTO t1 VALUES(-1111111111111111111111111111111111111);
31ERROR 22003: Out of range value for column 'c1' at row 1
32SELECT * FROM t1;
46INSERT INTO t1 VALUES(111111111111111111111111111111111111);
47ERROR 22003: Out of range value for column 'c1' at row 1
48INSERT INTO t1 VALUES(-1111111111111111111111111111111111111);
variables.result https://bitbucket.org/Habibutsu/mysql.git | Unknown | 1,779 lines
10set @my_max_binlog_size           =@@global.max_binlog_size;
11set @my_max_connect_errors        =@@global.max_connect_errors;
12set @my_max_connections           =@@global.max_connections;
1051set global max_binlog_size           =@my_max_binlog_size;
1052set global max_connect_errors        =@my_max_connect_errors;
1053set global max_connections           =@my_max_connections;
1252SELECT @@session.log_error;
1253ERROR HY000: Variable 'log_error' is a GLOBAL variable
1254SELECT @@global.log_error;
1257SET @@session.log_error= 'x';
1258ERROR HY000: Variable 'log_error' is a read only variable
1259SET @@global.log_error= 'x';
1259SET @@global.log_error= 'x';
1260ERROR HY000: Variable 'log_error' is a read only variable
1261#
signal.result https://bitbucket.org/Habibutsu/mysql.git | Unknown | 2,393 lines
70create table test_reserved (resignal int);
71ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'resignal int)' at line 1
72create table test_reserved (condition int);
72create table test_reserved (condition int);
73ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'condition int)' at line 1
74#
83end $$
84ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ';
85end' at line 3
1504before RESIGNAL
1505ERROR 55555: Raising an error
1506drop procedure test_resignal $$
2377end $$
2378ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''cÊèçà' CONDITION FOR SQLSTATE '12345';
2379SIGNAL 'cÊèçà' S' at line 3
errors.html https://bitbucket.org/georgikirow/ksk.git | HTML | 3,834 lines
61                                    Reports <b class="caret"></b></a><ul class="dropdown-menu">
62<li><a href="errors.html"><i class="icon-remove-sign"></i>�Errors�
63                <span class="label label-info">519</span></a></li>
89<li><div class="btn-group type-filter" data-toggle="buttons-checkbox">
90<button class="btn critical">Critical</button><button class="btn error">Error</button><button class="btn notice">Notice</button>
91</div></li>
134<li><a href="#PHPExcel%5CShared%5CJAMA%5CSingularValueDecomposition.php"><i class="icon-file"></i>PHPExcel\Shared\JAMA\SingularValueDecomposition.php</a></li>
135<li><a href="#PHPExcel%5CShared%5CJAMA%5Cutils%5CError.php"><i class="icon-file"></i>PHPExcel\Shared\JAMA\utils\Error.php</a></li>
136<li><a href="#PHPExcel%5CShared%5CJAMA%5Cutils%5CMaths.php"><i class="icon-file"></i>PHPExcel\Shared\JAMA\utils\Maths.php</a></li>
2638<div class="package-contents">
2639<a name="PHPExcel%5CShared%5CJAMA%5Cutils%5CError.php" id="PHPExcel\Shared\JAMA\utils\Error.php"></a><h3>
2640<i class="icon-file"></i>PHPExcel\Shared\JAMA\utils\Error.php<small style="float: right;padding-right: 10px;">3</small>
2656<td>66</td>
2657<td>Name of argument $errorNumber does not match with the DocBlock's name $num in \JAMAError()</td>
2658</tr>
main.c https://bitbucket.org/mifl/android_kernel_qrd_msm.git | C | 1,203 lines
63
64static int async_error;
65
229{
230	int error = 0;
231	ktime_t calltime;
245		if (ops->suspend) {
246			error = ops->suspend(dev);
247			suspend_report_result(ops->suspend, error);
999		pm_runtime_put_sync(dev);
1000		async_error = error;
1001	} else if (dev->power.is_suspended) {
1069	if (!error)
1070		error = async_error;
1071	if (!error)
jsonrpc.py https://bitbucket.org/devonit/qjsonrpc.git | Python | 1,075 lines
209    def __init__(self, error_data=None):
210        RPCFault.__init__(self, PARSE_ERROR, ERROR_MESSAGE[PARSE_ERROR], error_data)
211
360            return '{"result": null, "error": {"code":%s, "message": %s}, "id": %s}' % \
361                    (self.dumps(error.error_code), self.dumps(error.error_message), self.dumps(id))
362        else:
363            return '{"result": null, "error": {"code":%s, "message": %s, "data": %s}, "id": %s}' % \
364                    (self.dumps(error.error_code), self.dumps(error.error_message), self.dumps(error.error_data), self.dumps(id))
365
545            return '{"jsonrpc": "2.0", "error": {"code":%s, "message": %s, "data": %s}, "id": %s}' % \
546                    (self.dumps(error.error_code), self.dumps(error.error_message), self.dumps(error.error_data), self.dumps(id))
547
1056            self.log( "%d (%s): %s" % (INTERNAL_ERROR, ERROR_MESSAGE[INTERNAL_ERROR], str(err)) )
1057            return self.__data_serializer.dumps_error( RPCFault(INTERNAL_ERROR, ERROR_MESSAGE[INTERNAL_ERROR]), id )
1058
xfs_vnodeops.c https://bitbucket.org/lgorence/linux.git | C | 1,875 lines
235		error = xfs_free_eofblocks(mp, ip, true);
236		if (error && error != EAGAIN)
237			return error;
928		if (ip->i_d.di_nlink != 2) {
929			error = XFS_ERROR(ENOTEMPTY);
930			goto out_trans_cancel;
932		if (!xfs_dir_isempty(ip)) {
933			error = XFS_ERROR(ENOTEMPTY);
934			goto out_trans_cancel;
1075		     (xfs_get_projid(tdp) != xfs_get_projid(sip)))) {
1076		error = XFS_ERROR(EXDEV);
1077		goto error_return;
1314		if (nimaps == 0) {
1315			error = XFS_ERROR(ENOSPC);
1316			break;
wl_android.c https://bitbucket.org/arter97/arter97-cm-i9300.git | C | 2,561 lines
742	if (error) {
743		DHD_ERROR(("Failed to get Scan Home Time, error = %d\n", error));
744		return -1;
817	if (error) {
818		DHD_ERROR(("%s: Failed to get Scan NProbes, error = %d\n", __FUNCTION__, error));
819		return -1;
1031	if (error) {
1032		DHD_ERROR(("%s: Failed to get OKC Mode, error = %d\n", __FUNCTION__, error));
1033		return -1;
1612	if (error) {
1613		DHD_ERROR(("Failed to set SRL, error = %d\n", error));
1614	}
1616	if (error) {
1617		DHD_ERROR(("Failed to set LRL, error = %d\n", error));
1618	}
client_test.coffee https://bitbucket.org/coderaiser/cloudcmd.git | CoffeeScript | 1,493 lines
103    @__client.remove @testFolder, (error, stat) =>
104      @test.error(new Error(error)) if error
105      done()
778      listenerError = null
779      @client.onError.addListener (error) -> listenerError = error
780
784        expect(error).to.be.instanceOf Dropbox.ApiError
785        expect(listenerError).to.equal error
786        unless Dropbox.Xhr.ieXdr  # IE's XDR doesn't do status codes.
878      listenerError = null
879      @client.onError.addListener (error) -> listenerError = error
880
882        expect(error).to.be.instanceOf Dropbox.ApiError
883        expect(listenerError).to.equal error
884        unless Dropbox.Xhr.ieXdr  # IE's XDR doesn't do status codes.
ex4_4.out https://bitbucket.org/petsc/petsc.git | Unknown | 113 lines
1Solving a linear TS problem, number of processors = 3
2Timestep 0: time = 0. 2-norm error = 0. max norm error = 0.
3Timestep 1: time = 0.000143637 2-norm error = 0.000599907 max norm error = 0.000863771
3Timestep 1: time = 0.000143637 2-norm error = 0.000599907 max norm error = 0.000863771
4Timestep 2: time = 0.000287274 2-norm error = 0.00113969 max norm error = 0.00164231
5Timestep 3: time = 0.000430911 2-norm error = 0.00162387 max norm error = 0.00234201
5Timestep 3: time = 0.000430911 2-norm error = 0.00162387 max norm error = 0.00234201
6Timestep 4: time = 0.000574548 2-norm error = 0.00205669 max norm error = 0.00296886
7Timestep 5: time = 0.000718184 2-norm error = 0.00244208 max norm error = 0.00352842
7Timestep 5: time = 0.000718184 2-norm error = 0.00244208 max norm error = 0.00352842
8Timestep 6: time = 0.000861821 2-norm error = 0.00278372 max norm error = 0.00402589
9Timestep 7: time = 0.00100546 2-norm error = 0.00308505 max norm error = 0.00446612
9Timestep 7: time = 0.00100546 2-norm error = 0.00308505 max norm error = 0.00446612
10Timestep 8: time = 0.0011491 2-norm error = 0.00334925 max norm error = 0.00485363
11Timestep 9: time = 0.00129273 2-norm error = 0.0035793 max norm error = 0.00519261
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21