/configs/common/Simulation.py
Python | 374 lines | 260 code | 56 blank | 58 comment | 102 complexity | aae145a3b2b9dfa57dfe3577440fefbd MD5 | raw file
Possible License(s): BSD-3-Clause, LGPL-2.1
- # Copyright (c) 2006-2008 The Regents of The University of Michigan
- # Copyright (c) 2010 Advanced Micro Devices, Inc.
- # All rights reserved.
- #
- # Redistribution and use in source and binary forms, with or without
- # modification, are permitted provided that the following conditions are
- # met: redistributions of source code must retain the above copyright
- # notice, this list of conditions and the following disclaimer;
- # redistributions in binary form must reproduce the above copyright
- # notice, this list of conditions and the following disclaimer in the
- # documentation and/or other materials provided with the distribution;
- # neither the name of the copyright holders nor the names of its
- # contributors may be used to endorse or promote products derived from
- # this software without specific prior written permission.
- #
- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- #
- # Authors: Lisa Hsu
- from os import getcwd
- from os.path import join as joinpath
- import m5
- from m5.defines import buildEnv
- from m5.objects import *
- from m5.util import *
- addToPath('../common')
- def setCPUClass(options):
- atomic = False
- if options.timing:
- class TmpClass(TimingSimpleCPU): pass
- elif options.detailed:
- if not options.caches:
- print "O3 CPU must be used with caches"
- sys.exit(1)
- class TmpClass(DerivO3CPU): pass
- elif options.inorder:
- if not options.caches:
- print "InOrder CPU must be used with caches"
- sys.exit(1)
- class TmpClass(InOrderCPU): pass
- else:
- class TmpClass(AtomicSimpleCPU): pass
- atomic = True
- CPUClass = None
- test_mem_mode = 'atomic'
- if not atomic:
- if options.checkpoint_restore != None or options.fast_forward:
- CPUClass = TmpClass
- class TmpClass(AtomicSimpleCPU): pass
- else:
- test_mem_mode = 'timing'
- return (TmpClass, test_mem_mode, CPUClass)
- def run(options, root, testsys, cpu_class):
- if options.maxtick:
- maxtick = options.maxtick
- elif options.maxtime:
- simtime = m5.ticks.seconds(simtime)
- print "simulating for: ", simtime
- maxtick = simtime
- else:
- maxtick = m5.MaxTick
- if options.checkpoint_dir:
- cptdir = options.checkpoint_dir
- elif m5.options.outdir:
- cptdir = m5.options.outdir
- else:
- cptdir = getcwd()
- if options.fast_forward and options.checkpoint_restore != None:
- fatal("Can't specify both --fast-forward and --checkpoint-restore")
- if options.standard_switch and not options.caches:
- fatal("Must specify --caches when using --standard-switch")
- np = options.num_cpus
- max_checkpoints = options.max_checkpoints
- switch_cpus = None
- if options.prog_interval:
- for i in xrange(np):
- testsys.cpu[i].progress_interval = options.prog_interval
- if options.maxinsts:
- for i in xrange(np):
- testsys.cpu[i].max_insts_any_thread = options.maxinsts
- if cpu_class:
- switch_cpus = [cpu_class(defer_registration=True, cpu_id=(np+i))
- for i in xrange(np)]
- for i in xrange(np):
- if options.fast_forward:
- testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
- switch_cpus[i].system = testsys
- if not buildEnv['FULL_SYSTEM']:
- switch_cpus[i].workload = testsys.cpu[i].workload
- switch_cpus[i].clock = testsys.cpu[0].clock
- # simulation period
- if options.maxinsts:
- switch_cpus[i].max_insts_any_thread = options.maxinsts
- testsys.switch_cpus = switch_cpus
- switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
- if options.standard_switch:
- if not options.caches:
- # O3 CPU must have a cache to work.
- print "O3 CPU must be used with caches"
- sys.exit(1)
- switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(np+i))
- for i in xrange(np)]
- switch_cpus_1 = [DerivO3CPU(defer_registration=True, cpu_id=(2*np+i))
- for i in xrange(np)]
- for i in xrange(np):
- switch_cpus[i].system = testsys
- switch_cpus_1[i].system = testsys
- if not buildEnv['FULL_SYSTEM']:
- switch_cpus[i].workload = testsys.cpu[i].workload
- switch_cpus_1[i].workload = testsys.cpu[i].workload
- switch_cpus[i].clock = testsys.cpu[0].clock
- switch_cpus_1[i].clock = testsys.cpu[0].clock
- # if restoring, make atomic cpu simulate only a few instructions
- if options.checkpoint_restore != None:
- testsys.cpu[i].max_insts_any_thread = 1
- # Fast forward to specified location if we are not restoring
- elif options.fast_forward:
- testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
- # Fast forward to a simpoint (warning: time consuming)
- elif options.simpoint:
- if testsys.cpu[i].workload[0].simpoint == 0:
- fatal('simpoint not found')
- testsys.cpu[i].max_insts_any_thread = \
- testsys.cpu[i].workload[0].simpoint
- # No distance specified, just switch
- else:
- testsys.cpu[i].max_insts_any_thread = 1
- # warmup period
- if options.warmup_insts:
- switch_cpus[i].max_insts_any_thread = options.warmup_insts
- # simulation period
- if options.maxinsts:
- switch_cpus_1[i].max_insts_any_thread = options.maxinsts
- testsys.switch_cpus = switch_cpus
- testsys.switch_cpus_1 = switch_cpus_1
- switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
- switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
- # set the checkpoint in the cpu before m5.instantiate is called
- if options.take_checkpoints != None and \
- (options.simpoint or options.at_instruction):
- offset = int(options.take_checkpoints)
- # Set an instruction break point
- if options.simpoint:
- for i in xrange(np):
- if testsys.cpu[i].workload[0].simpoint == 0:
- fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
- checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
- testsys.cpu[i].max_insts_any_thread = checkpoint_inst
- # used for output below
- options.take_checkpoints = checkpoint_inst
- else:
- options.take_checkpoints = offset
- # Set all test cpus with the right number of instructions
- # for the upcoming simulation
- for i in xrange(np):
- testsys.cpu[i].max_insts_any_thread = offset
- checkpoint_dir = None
- if options.checkpoint_restore != None:
- from os.path import isdir, exists
- from os import listdir
- import re
- if not isdir(cptdir):
- fatal("checkpoint dir %s does not exist!", cptdir)
- if options.at_instruction or options.simpoint:
- inst = options.checkpoint_restore
- if options.simpoint:
- # assume workload 0 has the simpoint
- if testsys.cpu[0].workload[0].simpoint == 0:
- fatal('Unable to find simpoint')
- inst += int(testsys.cpu[0].workload[0].simpoint)
- checkpoint_dir = joinpath(cptdir,
- "cpt.%s.%s" % (options.bench, inst))
- if not exists(checkpoint_dir):
- fatal("Unable to find checkpoint directory %s", checkpoint_dir)
- else:
- dirs = listdir(cptdir)
- expr = re.compile('cpt\.([0-9]*)')
- cpts = []
- for dir in dirs:
- match = expr.match(dir)
- if match:
- cpts.append(match.group(1))
- cpts.sort(lambda a,b: cmp(long(a), long(b)))
- cpt_num = options.checkpoint_restore
- if cpt_num > len(cpts):
- fatal('Checkpoint %d not found', cpt_num)
- ## Adjust max tick based on our starting tick
- maxtick = maxtick - int(cpts[cpt_num - 1])
- checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
- m5.instantiate(checkpoint_dir)
- if options.standard_switch or cpu_class:
- if options.standard_switch:
- print "Switch at instruction count:%s" % \
- str(testsys.cpu[0].max_insts_any_thread)
- exit_event = m5.simulate()
- elif cpu_class and options.fast_forward:
- print "Switch at instruction count:%s" % \
- str(testsys.cpu[0].max_insts_any_thread)
- exit_event = m5.simulate()
- else:
- print "Switch at curTick count:%s" % str(10000)
- exit_event = m5.simulate(10000)
- print "Switched CPUS @ tick %s" % (m5.curTick())
- # when you change to Timing (or Atomic), you halt the system
- # given as argument. When you are finished with the system
- # changes (including switchCpus), you must resume the system
- # manually. You DON'T need to resume after just switching
- # CPUs if you haven't changed anything on the system level.
- m5.changeToTiming(testsys)
- m5.switchCpus(switch_cpu_list)
- m5.resume(testsys)
- if options.standard_switch:
- print "Switch at instruction count:%d" % \
- (testsys.switch_cpus[0].max_insts_any_thread)
- #warmup instruction count may have already been set
- if options.warmup_insts:
- exit_event = m5.simulate()
- else:
- exit_event = m5.simulate(options.warmup)
- print "Switching CPUS @ tick %s" % (m5.curTick())
- print "Simulation ends instruction count:%d" % \
- (testsys.switch_cpus_1[0].max_insts_any_thread)
- m5.drain(testsys)
- m5.switchCpus(switch_cpu_list1)
- m5.resume(testsys)
- num_checkpoints = 0
- exit_cause = ''
- # If we're taking and restoring checkpoints, use checkpoint_dir
- # option only for finding the checkpoints to restore from. This
- # lets us test checkpointing by restoring from one set of
- # checkpoints, generating a second set, and then comparing them.
- if options.take_checkpoints and options.checkpoint_restore:
- if m5.options.outdir:
- cptdir = m5.options.outdir
- else:
- cptdir = getcwd()
- # Checkpoints being taken via the command line at <when> and at
- # subsequent periods of <period>. Checkpoint instructions
- # received from the benchmark running are ignored and skipped in
- # favor of command line checkpoint instructions.
- if options.take_checkpoints != None :
- if options.at_instruction or options.simpoint:
- checkpoint_inst = int(options.take_checkpoints)
- # maintain correct offset if we restored from some instruction
- if options.checkpoint_restore != None:
- checkpoint_inst += options.checkpoint_restore
- print "Creating checkpoint at inst:%d" % (checkpoint_inst)
- exit_event = m5.simulate()
- print "exit cause = %s" % (exit_event.getCause())
- # skip checkpoint instructions should they exist
- while exit_event.getCause() == "checkpoint":
- exit_event = m5.simulate()
- if exit_event.getCause() == \
- "a thread reached the max instruction count":
- m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
- (options.bench, checkpoint_inst)))
- print "Checkpoint written."
- num_checkpoints += 1
- if exit_event.getCause() == "user interrupt received":
- exit_cause = exit_event.getCause();
- else:
- when, period = options.take_checkpoints.split(",", 1)
- when = int(when)
- period = int(period)
- exit_event = m5.simulate(when)
- while exit_event.getCause() == "checkpoint":
- exit_event = m5.simulate(when - m5.curTick())
- if exit_event.getCause() == "simulate() limit reached":
- m5.checkpoint(joinpath(cptdir, "cpt.%d"))
- num_checkpoints += 1
- sim_ticks = when
- exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
- while num_checkpoints < max_checkpoints and \
- exit_event.getCause() == "simulate() limit reached":
- if (sim_ticks + period) > maxtick:
- exit_event = m5.simulate(maxtick - sim_ticks)
- exit_cause = exit_event.getCause()
- break
- else:
- exit_event = m5.simulate(period)
- sim_ticks += period
- while exit_event.getCause() == "checkpoint":
- exit_event = m5.simulate(sim_ticks - m5.curTick())
- if exit_event.getCause() == "simulate() limit reached":
- m5.checkpoint(joinpath(cptdir, "cpt.%d"))
- num_checkpoints += 1
- if exit_event.getCause() != "simulate() limit reached":
- exit_cause = exit_event.getCause();
- else: # no checkpoints being taken via this script
- if options.fast_forward:
- m5.stats.reset()
- print "**** REAL SIMULATION ****"
- exit_event = m5.simulate(maxtick)
- while exit_event.getCause() == "checkpoint":
- m5.checkpoint(joinpath(cptdir, "cpt.%d"))
- num_checkpoints += 1
- if num_checkpoints == max_checkpoints:
- exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
- break
- exit_event = m5.simulate(maxtick - m5.curTick())
- exit_cause = exit_event.getCause()
- if exit_cause == '':
- exit_cause = exit_event.getCause()
- print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
- if options.checkpoint_at_end:
- m5.checkpoint(joinpath(cptdir, "cpt.%d"))