/kern_oII/arch/arm/mach-davinci/devices.c
http://omnia2droid.googlecode.com/ · C · 267 lines · 188 code · 43 blank · 36 comment · 9 complexity · 2c7fe10aea35e12882a7eab72220de04 MD5 · raw file
- /*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/io.h>
- #include <asm/mach/map.h>
- #include <mach/hardware.h>
- #include <mach/i2c.h>
- #include <mach/irqs.h>
- #include <mach/cputype.h>
- #include <mach/mux.h>
- #include <mach/edma.h>
- #include <mach/mmc.h>
- #include <mach/time.h>
- #define DAVINCI_I2C_BASE 0x01C21000
- #define DAVINCI_MMCSD0_BASE 0x01E10000
- #define DM355_MMCSD0_BASE 0x01E11000
- #define DM355_MMCSD1_BASE 0x01E00000
- static struct resource i2c_resources[] = {
- {
- .start = DAVINCI_I2C_BASE,
- .end = DAVINCI_I2C_BASE + 0x40,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_I2C,
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct platform_device davinci_i2c_device = {
- .name = "i2c_davinci",
- .id = 1,
- .num_resources = ARRAY_SIZE(i2c_resources),
- .resource = i2c_resources,
- };
- void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
- {
- if (cpu_is_davinci_dm644x())
- davinci_cfg_reg(DM644X_I2C);
- davinci_i2c_device.dev.platform_data = pdata;
- (void) platform_device_register(&davinci_i2c_device);
- }
- #if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
- static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
- static struct resource mmcsd0_resources[] = {
- {
- /* different on dm355 */
- .start = DAVINCI_MMCSD0_BASE,
- .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- /* IRQs: MMC/SD, then SDIO */
- {
- .start = IRQ_MMCINT,
- .flags = IORESOURCE_IRQ,
- }, {
- /* different on dm355 */
- .start = IRQ_SDIOINT,
- .flags = IORESOURCE_IRQ,
- },
- /* DMA channels: RX, then TX */
- {
- .start = DAVINCI_DMA_MMCRXEVT,
- .flags = IORESOURCE_DMA,
- }, {
- .start = DAVINCI_DMA_MMCTXEVT,
- .flags = IORESOURCE_DMA,
- },
- };
- static struct platform_device davinci_mmcsd0_device = {
- .name = "davinci_mmc",
- .id = 0,
- .dev = {
- .dma_mask = &mmcsd0_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mmcsd0_resources),
- .resource = mmcsd0_resources,
- };
- static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
- static struct resource mmcsd1_resources[] = {
- {
- .start = DM355_MMCSD1_BASE,
- .end = DM355_MMCSD1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- /* IRQs: MMC/SD, then SDIO */
- {
- .start = IRQ_DM355_MMCINT1,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_DM355_SDIOINT1,
- .flags = IORESOURCE_IRQ,
- },
- /* DMA channels: RX, then TX */
- {
- .start = 30, /* rx */
- .flags = IORESOURCE_DMA,
- }, {
- .start = 31, /* tx */
- .flags = IORESOURCE_DMA,
- },
- };
- static struct platform_device davinci_mmcsd1_device = {
- .name = "davinci_mmc",
- .id = 1,
- .dev = {
- .dma_mask = &mmcsd1_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mmcsd1_resources),
- .resource = mmcsd1_resources,
- };
- void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
- {
- struct platform_device *pdev = NULL;
- if (WARN_ON(cpu_is_davinci_dm646x()))
- return;
- /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
- * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
- *
- * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
- * not handled right here ...
- */
- switch (module) {
- case 1:
- if (!cpu_is_davinci_dm355())
- break;
- /* REVISIT we may not need all these pins if e.g. this
- * is a hard-wired SDIO device...
- */
- davinci_cfg_reg(DM355_SD1_CMD);
- davinci_cfg_reg(DM355_SD1_CLK);
- davinci_cfg_reg(DM355_SD1_DATA0);
- davinci_cfg_reg(DM355_SD1_DATA1);
- davinci_cfg_reg(DM355_SD1_DATA2);
- davinci_cfg_reg(DM355_SD1_DATA3);
- pdev = &davinci_mmcsd1_device;
- break;
- case 0:
- if (cpu_is_davinci_dm355()) {
- mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
- mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
- mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
- /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */
- davinci_cfg_reg(DM355_MMCSD0);
- /* enable RX EDMA */
- davinci_cfg_reg(DM355_EVT26_MMC0_RX);
- }
- else if (cpu_is_davinci_dm644x()) {
- /* REVISIT: should this be in board-init code? */
- void __iomem *base =
- IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
- /* Power-on 3.3V IO cells */
- __raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
- /*Set up the pull regiter for MMC */
- davinci_cfg_reg(DM644X_MSTK);
- }
- pdev = &davinci_mmcsd0_device;
- break;
- }
- if (WARN_ON(!pdev))
- return;
- pdev->dev.platform_data = config;
- platform_device_register(pdev);
- }
- #else
- void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
- {
- }
- #endif
- /*-------------------------------------------------------------------------*/
- static struct resource wdt_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- },
- };
- struct platform_device davinci_wdt_device = {
- .name = "watchdog",
- .id = -1,
- .num_resources = ARRAY_SIZE(wdt_resources),
- .resource = wdt_resources,
- };
- static void davinci_init_wdt(void)
- {
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
- wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
- platform_device_register(&davinci_wdt_device);
- }
- /*-------------------------------------------------------------------------*/
- struct davinci_timer_instance davinci_timer_instance[2] = {
- {
- .base = IO_ADDRESS(DAVINCI_TIMER0_BASE),
- .bottom_irq = IRQ_TINT0_TINT12,
- .top_irq = IRQ_TINT0_TINT34,
- },
- {
- .base = IO_ADDRESS(DAVINCI_TIMER1_BASE),
- .bottom_irq = IRQ_TINT1_TINT12,
- .top_irq = IRQ_TINT1_TINT34,
- },
- };
- /*-------------------------------------------------------------------------*/
- static int __init davinci_init_devices(void)
- {
- /* please keep these calls, and their implementations above,
- * in alphabetical order so they're easier to sort through.
- */
- davinci_init_wdt();
- return 0;
- }
- arch_initcall(davinci_init_devices);