/passwd/config/backends.php
PHP | 548 lines | 341 code | 27 blank | 180 comment | 0 complexity | 7ef39c88afd334eb75a28bd7dce791b8 MD5 | raw file
Possible License(s): LGPL-2.0, AGPL-1.0, LGPL-2.1, BSD-2-Clause
- <?php
- /**
- * $Horde: passwd/config/backends.php.dist,v 1.41.2.6 2009-09-18 14:31:58 jan Exp $
- *
- * This file is where you specify what backends people use to change
- * their passwords. There are a number of properties that you can set
- * for each backend:
- *
- * name: This is the plaintext, english name that you want displayed
- * to people if you are using the drop down server list. Also
- * displayed on the main page (input form).
- *
- * password policy: The password policies for this backend. You are responsible
- * for the sanity checks of these options. Options are:
- * minLength Minimum length of the password
- * maxLength Maximum length of the password
- * maxSpace Maximum number of white space characters
- *
- * The following are the types of characters required
- * in a password. Either specific characters, character
- * classes, or both can be required. Specific types are:
- *
- * minUpper Minimum number of uppercase characters
- * minLower Minimum number of lowercase characters
- * minNumeric Minimum number of numeric characters (0-9)
- * minAlphaNum Minimum number of alphanumeric characters
- * minAlpha Minimum number of alphabetic characters
- * minSymbol Minimum number of alphabetic characters
- *
- * Alternatively (or in addition to), the minimum number of
- * character classes can be configured by setting the
- * following. The valid range is 0 through 4 character
- * classes may be required for a password. The classes are:
- * 'upper', 'lower', 'number', and 'symbol'. For example:
- * A password of 'p@ssw0rd' satisfies three classes ('number',
- * 'lower', and 'symbol'), while 'passw0rd' only satisfies
- * two classes ('lower' and 'symbols').
- *
- * minClasses Minimum number (0 through 4) of character classes.
- *
- * driver: The Passwd driver used to change the password. Valid
- * Valid values are currently:
- * ldap Change the password on a ldap server
- * smbldap Change the password on a ldap server for both
- * ldap and samba auth
- * sql Change the password for sql authentication
- * (exim, pam_mysql, horde)
- * poppassd Change the password via a poppassd server
- * smbpasswd Change the password via the smbpasswd command
- * expect Change the password via an expect script
- * vmailmgr Change the password via a local vmailmgr daemon
- * vpopmail Change the password for sql based vpopmail
- * servuftp Change the password via a servuftp server
- * pine Change the password in a Pine-encoded file
- * composite Allows you to chain multiple drivers together
- *
- * no_reset: Do not reset the authenticated user's credentials on success.
- *
- * params: A params array containing any additional information that the
- * Passwd driver needs.
- *
- * The following is a list of supported encryption/hashing
- * methods supported by Passwd.
- *
- * 1) plain
- * 2) crypt or crypt-des
- * 3) crypt-md5
- * 4) crypt-blowfish
- * 5) md5-hex
- * 6) md5-base64
- * 7) smd5
- * 8) sha
- * 9) ssha
- *
- * md5 passwords have caused some problems in the past because
- * there are different definitions of what is a "md5
- * password". Systems implement them in a different
- * manner. If you are using OpenLDAP as your backend or
- * have migrated your passwords from your OS based passwd
- * file, you will need to use the md5-base64 hashing
- * method. If you are using a SQL database or used the PHP
- * md5() method to create your passwords, you will need to
- * use the md5-hex hashing method.
- *
- * preferred: This is only useful if you want to use the same
- * backend.php file for different machines: if the Hostname
- * of the Passwd Machine is identical to one of those in
- * the preferred list, then the corresponding option in the
- * select box will include SELECTED, i.e. it is selected
- * per default. Otherwise the first entry in the list is
- * selected.
- *
- * show_encryption: If you are using the sql or the vpopmail backend
- * you have the choice whether or not to store the
- * encryption type with the password. If you are
- * using for example an SQL based PAM you will most
- * likely not want to store the encryption type as it
- * would cause PAM to never match the passwords.
- *
- */
- $backends['hordesql'] = array (
- 'name' => 'Horde Authentication',
- 'preferred' => '',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8,
- 'maxSpace' => 0,
- 'minUpper' => 1,
- 'minLower' => 1,
- 'minNumeric' => 1,
- 'minSymbols' => 1
- ),
- 'driver' => 'sql',
- 'params' => array_merge($conf['sql'],
- array('table' => 'horde_users',
- 'user_col' => 'user_uid',
- 'pass_col' => 'user_pass',
- 'show_encryption' => false)),
- );
- $backends['poppassd'] = array(
- 'name' => 'Example Poppassd Server',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'poppassd',
- 'params' => array(
- 'host' => 'localhost',
- 'port' => 106
- )
- );
- $backends['servuftp'] = array(
- 'name' => 'Example Serv-U FTP Server',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'servuftp',
- 'params' => array(
- 'host' => 'localhost',
- 'port' => 106,
- 'timeout' => 30
- )
- );
- $backends['expect'] = array(
- 'name' => 'Example Expect Script',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'expect',
- 'params' => array(
- 'program' => '/usr/bin/expect',
- 'script' => dirname(__FILE__) . '/../scripts/passwd_expect',
- 'params' => '-telnet -host localhost -output /tmp/passwd.log'
- )
- );
- $backends['sudo_expect'] = array(
- 'name' => 'Example Expect with Sudo Script',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'procopen',
- 'params' => array(
- 'program' => '/usr/bin/expect ' . dirname(__FILE__) . '/../scripts/passwd_expect -sudo'
- )
- );
- $backends['smbpasswd'] = array(
- 'name' => 'Example Samba Server',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'smbpasswd',
- 'params' => array(
- 'program' => '/usr/bin/smbpasswd',
- 'host' => 'localhost'
- )
- );
- // NOTE: to set the ldap userdn, see horde/config/hooks.php
- $backends['ldap'] = array(
- 'name' => 'Example LDAP Server',
- 'preferred' => 'www.example.com',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8
- ),
- 'driver' => 'ldap',
- 'params' => array(
- 'host' => 'localhost',
- 'port' => 389,
- 'basedn' => 'o=example.com',
- 'uid' => 'uid',
- // these attributes will enable shadow password policies.
- // 'shadowlastchange' => 'shadowlastchange',
- // 'shadowmin' => 'shadowmin',
- // this will be appended to the username when looking for the userdn.
- 'realm' => '',
- 'encryption' => 'crypt',
- // make sure the host == cn in the server certificate
- 'tls' => false
- )
- );
- // NOTE: to set the ldap userdn, see horde/config/hooks.php
- $backends['ldapadmin'] = array(
- 'name' => 'Example LDAP Server with Admin Bindings',
- 'preferred' => 'www.example.com',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8
- ),
- 'driver' => 'ldap',
- 'params' => array(
- 'host' => 'localhost',
- 'port' => 389,
- 'basedn' => 'o=example.com',
- 'admindn' => 'cn=admin,o=example.com',
- 'adminpw' => 'somepassword',
- // LDAP object key attribute
- 'uid' => 'uid',
- // these attributes will enable shadow password policies.
- // 'shadowlastchange' => 'shadowlastchange',
- // 'shadowmin' => 'shadowmin',
- 'attribute' => 'clearPassword',
- // this will be appended to the username when looking for the userdn.
- 'realm' => '',
- // Use this filter when searching for the user's DN.
- 'filter' => '',
- // Hash method to use when storing the password
- 'encryption' => 'crypt',
-
- // Only applies to LDAP servers. If set, should be 0 or 1. See the LDAP
- // documentation about the corresponding parameter REFERRALS.
- // Windows 2003 Server require to set this parameter to 0
- //'referrals' => 0,
-
- // Whether to enable TLS for this LDAP connection
- // Note: make sure the host matches cn in the server certificate
- 'tls' => false
- )
- );
- // NOTE: to set the ldap userdn, see horde/config/hooks.php
- // NOTE: to make work with samba 2.x schema you must change lm_attribute and
- // nt_attribute
- $backends['smbldap'] = array(
- 'name' => 'Example Samba/LDAP Server',
- 'preferred' => 'www.example.com',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8
- ),
- 'driver' => 'smbldap',
- 'params' => array(
- 'host' => 'localhost',
- 'port' => 389,
- 'basedn' => 'o=example.com',
- 'uid' => 'uid',
- // This will be appended to the username when looking for the userdn.
- 'realm' => '',
- 'encryption' => 'crypt',
- // Make sure the host == cn in the server certificate.
- 'tls' => false,
- // If any of the following attributes are commented out, they
- // won't be set on the LDAP server.
- 'lm_attribute' => 'sambaLMPassword',
- 'nt_attribute' => 'sambaNTPassword',
- 'pw_set_attribute' => 'sambaPwdLastSet',
- 'pw_expire_attribute' => 'sambaPwdMustChange',
- // The number of days until samba passwords expire. If this
- // is commented out, passwords will never expire.
- 'pw_expire_time' => 180,
- )
- );
- $backends['sql'] = array (
- 'name' => 'Exampe SQL Server',
- 'preferred' => '',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8,
- 'maxSpace' => 0,
- 'minUpper' => 1,
- 'minLower' => 1,
- 'minNumeric' => 1,
- 'minSymbols' => 1
- ),
- 'driver' => 'sql',
- 'params' => array(
- 'phptype' => 'mysql',
- 'hostspec' => 'localhost',
- 'username' => 'dbuser',
- 'password' => 'dbpasswd',
- 'encryption' => 'md5-hex',
- 'database' => 'db',
- 'table' => 'users',
- 'user_col' => 'user_uid',
- 'pass_col' => 'user_pass',
- 'show_encryption' => false
- // The following two settings allow you to specify custom queries for
- // lookup and modify functions if special functions need to be
- // performed. In places where a username or a password needs to be
- // used, refer to this placeholder reference:
- // %d -> gets substituted with the domain
- // %u -> gets substituted with the user
- // %U -> gets substituted with the user without a domain part
- // %p -> gets substituted with the plaintext password
- // %e -> gets substituted with the encrypted password
- //
- // 'query_lookup' => 'SELECT user_pass FROM horde_users WHERE user_uid = %u',
- // 'query_modify' => 'UPDATE horde_users SET user_pass = %e WHERE user_uid = %u',
- )
- );
- $backends['vmailmgr'] = array(
- 'name' => 'Example VMailMgr Server',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'vmailmgr',
- 'params' => array(
- 'vmailinc' => '/your/path/to/the/vmail.inc'
- )
- );
- $backends['vpopmail'] = array (
- 'name' => 'Example Vpopmail Server',
- 'preferred' => '',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8,
- 'maxSpace' => 0,
- 'minUpper' => 0,
- 'minLower' => 0,
- 'minNumeric' => 0
- ),
- 'driver' => 'vpopmail',
- 'params' => array(
- 'phptype' => 'mysql',
- 'hostspec' => 'localhost',
- 'username' => '',
- 'password' => '',
- 'encryption' => 'crypt',
- 'database' => 'vpopmail',
- 'table' => 'vpopmail',
- 'name' => 'pw_name',
- 'domain' => 'pw_domain',
- 'passwd' => 'pw_passwd',
- 'clear_passwd' => 'pw_clear_passwd',
- 'use_clear_passwd' => true,
- 'show_encryption' => true
- )
- );
- $backends['pine'] = array(
- 'name' => 'Example Pine Password File',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'pine',
- 'no_reset' => true,
- 'params' => array(
- // FTP server information.
- 'host' => 'localhost',
- 'port' => '21',
- 'path' => '',
- 'file' => '.pinepw',
- // Connect using the just-passed-in password?
- 'use_new_passwd' => false,
- // Host string to look for in the encrypted file.
- 'imaphost' => 'localhost'
- )
- );
- $backends['kolab'] = array(
- 'name' => 'Local Kolab Server',
- 'preferred' => '',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8
- ),
- 'driver' => 'kolab',
- 'params' => array()
- );
- $backends['myscript'] = array(
- 'name' => 'example.com',
- 'preferred' => 'localhost',
- 'password policy' => array(),
- 'driver' => 'procopen',
- 'params' => array(
- 'program' => '/path/to/my/script + myargs'
- )
- );
- // This is an example configuration for the http driver. This allows
- // connecting to an arbitrary URL that contains a password change form.
- // The params 'username','oldPasswd','passwd1', and 'passwd2' params should be
- // set to the name of the respective form input elements on the html form. If
- // there are additional form fields that the form requires, define them in the
- // 'fields' array in the form 'formFieldName' => 'formFieldValue'. The driver
- // attempts to determine the success or failure based on searching the returned
- // html page for the values listed in the 'eval_results' array.
- $backends['http'] = array (
- 'name' => 'Email password on IMAP server',
- 'preferred' => '',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8,
- 'maxSpace' => 0,
- 'minUpper' => 0,
- 'minLower' => 1,
- 'minNumeric' => 1,
- 'minSymbols' => 0
- ),
- 'driver' => 'http',
- 'params' => array(
- 'url' => 'http://www.example.com/psoft/servlet/psoft.hsphere.CP',
- 'username' => 'mbox',
- 'oldPasswd' => 'old_password',
- 'passwd1' => 'password',
- 'passwd2' => 'password2',
- 'fields' => array(
- 'action' => 'change_mbox_password',
- 'ftemplate' => 'design/mail_passw.html'
- ),
- 'eval_results' => array(
- 'success' => 'Password successfully changed',
- 'badPass' => 'Bad old password',
- 'badUser' => 'Mailbox not found'
- )
- )
- );
- $backends['soap'] = array(
- 'name' => 'Example SOAP Server',
- 'preferred' => '',
- 'password policy' => array(),
- 'driver' => 'soap',
- 'params' => array(
- // If this service doesn't have a WSDL, the 'location' and 'uri'
- // parameters below must be specified instead.
- 'wsdl' => 'http://www.example.com/service.wsdl',
- 'method' => 'changePassword',
- // This is the order of the arguments to the method specified above.
- 'arguments' => array('username', 'oldpassword', 'newpassword'),
- // These parameters are directly passed to the SoapClient object, see
- // http://ww.php.net/manual/en/soapclient.soapclient.php for a
- // complete list of possible parameters.
- 'soap_params' => array(
- 'location' => '',
- 'uri' => '',
- ),
- )
- );
- // This is an example configuration for Postfix.admin 2.3.
- // Set the 'password_policy' section as you wish.
- // In most installations you probably only need to change the
- // hostspec and /or password fields.
- $backends['postfixadmin'] = array (
- 'name' => 'Postfix Admin server',
- 'preferred' => 'true',
- 'password policy' => array(
- 'minLength' => 6,
- 'maxLength' => 20,
- 'maxSpace' => 0,
- 'minUpper' => 1,
- 'minLower' => 1,
- 'minNumeric' => 1,
- 'minSymbols' => 0
- ),
- 'driver' => 'sql',
- 'params' => array(
- 'phptype' => 'mysql',
- 'hostspec' => 'localhost',
- 'username' => 'postfix',
- 'password' => 'PASSWORD',
- 'encryption' => 'crypt-md5',
- 'database' => 'postfix',
- 'table' => 'mailbox',
- 'user_col' => 'username',
- 'pass_col' => 'password',
- 'show_encryption' => false,
- // The following two settings allow you to specify custom queries for
- // lookup and modify functions if special functions need to be
- // performed. In places where a username or a password needs to be
- // used, refer to this placeholder reference:
- // %d -> gets substituted with the domain
- // %u -> gets substituted with the user
- // %U -> gets substituted with the user without a domain part
- // %p -> gets substituted with the plaintext password
- // %e -> gets substituted with the encrypted password
- //
- 'query_lookup' => 'SELECT password FROM mailbox WHERE username = %u and active = 1',
- 'query_modify' => 'UPDATE mailbox SET password = %e WHERE username = %u'
- )
- );
- // This is an example configuration for chaining multiple drivers to allow for
- // syncing of passwords across many backends using the composite driver as a
- // wrapper.
- //
- // Each of the subdrivers may contain an optional parameter called 'required'
- // that, when set to true, will cause the rest of the drivers be skipped if a
- // particular one fails.
- $backends['composite'] = array(
- 'name' => 'Example All Services',
- 'preferred' => '',
- 'password policy' => array(
- 'minLength' => 3,
- 'maxLength' => 8,
- 'minClasses' => 2,
- ),
- 'driver' => 'composite',
- 'params' => array('drivers' => array(
- 'sql' => array(
- 'name' => 'Horde Authentication',
- 'driver' => 'sql',
- 'required' => true,
- 'params' => array(
- 'phptype' => 'mysql',
- 'hostspec' => 'localhost',
- 'username' => 'horde',
- 'password' => '',
- 'encryption' => 'md5-hex',
- 'database' => 'horde',
- 'table' => 'horde_users',
- 'user_col' => 'user_uid',
- 'pass_col' => 'user_pass',
- 'show_encryption' => false
- // 'query_lookup' => '',
- // 'query_modify' => '',
- ),
- ),
- 'smbpasswd' => array(
- 'name' => 'Samba Server',
- 'driver' => 'smbpasswd',
- 'params' => array(
- 'program' => '/usr/bin/smbpasswd',
- 'host' => 'localhost',
- ),
- ),
- )),
- );