/include/configs/highbank.h

  1/*
  2 * Copyright 2010-2011 Calxeda, Inc.
  3 *
  4 * This program is free software; you can redistribute it and/or modify it
  5 * under the terms of the GNU General Public License as published by the Free
  6 * Software Foundation; either version 2 of the License, or (at your option)
  7 * any later version.
  8 *
  9 * This program is distributed in the hope it will be useful, but WITHOUT
 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 12 * more details.
 13 *
 14 * You should have received a copy of the GNU General Public License along with
 15 * this program.  If not, see <http://www.gnu.org/licenses/>.
 16 */
 17
 18#ifndef __CONFIG_H
 19#define __CONFIG_H
 20
 21#define CONFIG_L2_OFF
 22
 23#define CONFIG_SYS_NO_FLASH
 24#define CFG_HZ				1000
 25#define CONFIG_SYS_HZ			CFG_HZ
 26
 27#define CONFIG_OF_LIBFDT
 28#define CONFIG_FIT
 29#define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
 30
 31/*
 32 * Size of malloc() pool
 33 */
 34#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
 35
 36#define CONFIG_PL011_SERIAL
 37#define CONFIG_PL011_CLOCK		150000000
 38#define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
 39#define CONFIG_CONS_INDEX		0
 40
 41#define CONFIG_BAUDRATE			38400
 42
 43#define CONFIG_BOOTCOUNT_LIMIT
 44#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
 45#define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
 46#define CONFIG_SYS_BOOTCOUNT_ADDR	0xfff3cf0c
 47
 48#define CONFIG_MISC_INIT_R
 49#define CONFIG_SCSI_AHCI
 50#define CONFIG_SCSI_AHCI_PLAT
 51#define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
 52#define CONFIG_SYS_SCSI_MAX_LUN		1
 53#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 54					CONFIG_SYS_SCSI_MAX_LUN)
 55
 56#define CONFIG_DOS_PARTITION
 57
 58#define CONFIG_CALXEDA_XGMAC
 59
 60/* PXE support */
 61#define CONFIG_BOOTP_PXE
 62#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
 63#define CONFIG_BOOTP_VCI_STRING		"U-boot.armv7.highbank"
 64
 65/*
 66 * Command line configuration.
 67 */
 68#include <config_cmd_default.h>
 69
 70#define CONFIG_CMD_BDI
 71#define CONFIG_CMD_DHCP
 72#define CONFIG_CMD_ELF
 73#define CONFIG_CMD_MEMORY
 74#define CONFIG_CMD_LOADS
 75#define CONFIG_CMD_SCSI
 76#define CONFIG_CMD_EXT2
 77#define CONFIG_CMD_PXE
 78#define CONFIG_MENU
 79
 80#define CONFIG_BOOTDELAY		2
 81/*
 82 * Miscellaneous configurable options
 83 */
 84#define CONFIG_CMDLINE_EDITING
 85#define CONFIG_AUTO_COMPLETE
 86#define CONFIG_SYS_LONGHELP		/* undef to save memory		 */
 87#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 88#define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
 89#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 90#define CONFIG_SYS_PROMPT		"Highbank #"
 91/* Print Buffer Size */
 92#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 93					 sizeof(CONFIG_SYS_PROMPT)+16)
 94
 95#define CONFIG_SYS_LOAD_ADDR		0x800000
 96
 97/*-----------------------------------------------------------------------
 98 * Physical Memory Map
 99 */
100#define CONFIG_NR_DRAM_BANKS		1
101#define PHYS_SDRAM_1_SIZE		(4089 << 20)
102#define CONFIG_SYS_MEMTEST_START	0x100000
103#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)
104
105/* Environment data setup
106*/
107#define CONFIG_ENV_IS_IN_NVRAM
108#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfff88000	/* NVRAM base address */
109#define CONFIG_SYS_NVRAM_SIZE		0x8000		/* NVRAM size */
110#define CONFIG_ENV_SIZE			0x2000		/* Size of Environ */
111#define CONFIG_ENV_ADDR			CONFIG_SYS_NVRAM_BASE_ADDR
112
113#define CONFIG_SYS_SDRAM_BASE		0x00000000
114#define CONFIG_SYS_TEXT_BASE		0x00008000
115#define CONFIG_SYS_INIT_SP_ADDR		0x01000000
116#define CONFIG_SKIP_LOWLEVEL_INIT
117
118#endif