/arch/arm/boot/dts/imx27-apf27.dts

https://gitlab.com/veo-labs/linux · Device Tree · 124 lines · 94 code · 17 blank · 13 comment · 0 complexity · 7fe77a2143dc20d80b5698484cba14e1 MD5 · raw file

  1. /*
  2. * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
  3. * Copyright 2012 Armadeus Systems <support@armadeus.com>
  4. *
  5. * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
  6. *
  7. * The code contained herein is licensed under the GNU General Public
  8. * License. You may obtain a copy of the GNU General Public License
  9. * Version 2 or later at the following locations:
  10. *
  11. * http://www.opensource.org/licenses/gpl-license.html
  12. * http://www.gnu.org/copyleft/gpl.html
  13. */
  14. /dts-v1/;
  15. #include "imx27.dtsi"
  16. / {
  17. model = "Armadeus Systems APF27 module";
  18. compatible = "armadeus,imx27-apf27", "fsl,imx27";
  19. memory {
  20. reg = <0xa0000000 0x04000000>;
  21. };
  22. clocks {
  23. #address-cells = <1>;
  24. #size-cells = <0>;
  25. osc26m {
  26. compatible = "fsl,imx-osc26m", "fixed-clock";
  27. #clock-cells = <0>;
  28. clock-frequency = <0>;
  29. };
  30. };
  31. };
  32. &iomuxc {
  33. imx27-apf27 {
  34. pinctrl_fec1: fec1grp {
  35. fsl,pins = <
  36. MX27_PAD_SD3_CMD__FEC_TXD0 0x0
  37. MX27_PAD_SD3_CLK__FEC_TXD1 0x0
  38. MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
  39. MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
  40. MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
  41. MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
  42. MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
  43. MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
  44. MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
  45. MX27_PAD_ATA_DATA7__FEC_MDC 0x0
  46. MX27_PAD_ATA_DATA8__FEC_CRS 0x0
  47. MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
  48. MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
  49. MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
  50. MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
  51. MX27_PAD_ATA_DATA13__FEC_COL 0x0
  52. MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
  53. MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
  54. >;
  55. };
  56. pinctrl_uart1: uart1grp {
  57. fsl,pins = <
  58. MX27_PAD_UART1_TXD__UART1_TXD 0x0
  59. MX27_PAD_UART1_RXD__UART1_RXD 0x0
  60. >;
  61. };
  62. };
  63. };
  64. &uart1 {
  65. pinctrl-names = "default";
  66. pinctrl-0 = <&pinctrl_uart1>;
  67. status = "okay";
  68. };
  69. &fec {
  70. pinctrl-names = "default";
  71. pinctrl-0 = <&pinctrl_fec1>;
  72. status = "okay";
  73. };
  74. &nfc {
  75. status = "okay";
  76. nand-bus-width = <16>;
  77. nand-ecc-mode = "hw";
  78. nand-on-flash-bbt;
  79. partition@0 {
  80. label = "u-boot";
  81. reg = <0x0 0x100000>;
  82. };
  83. partition@100000 {
  84. label = "env";
  85. reg = <0x100000 0x80000>;
  86. };
  87. partition@180000 {
  88. label = "env2";
  89. reg = <0x180000 0x80000>;
  90. };
  91. partition@200000 {
  92. label = "firmware";
  93. reg = <0x200000 0x80000>;
  94. };
  95. partition@280000 {
  96. label = "dtb";
  97. reg = <0x280000 0x80000>;
  98. };
  99. partition@300000 {
  100. label = "kernel";
  101. reg = <0x300000 0x500000>;
  102. };
  103. partition@800000 {
  104. label = "rootfs";
  105. reg = <0x800000 0xf800000>;
  106. };
  107. };