PageRenderTime 26ms CodeModel.GetById 16ms app.highlight 5ms RepoModel.GetById 2ms app.codeStats 0ms

/arch/powerpc/boot/dts/p1025rdb.dtsi

https://github.com/aicjofs/android_kernel_lge_v500_20d_f2fs
Device Tree | 286 lines | 188 code | 34 blank | 64 comment | 0 complexity | d9f53e57176563cd69d2a95bb34c5d74 MD5 | raw file
  1/*
  2 * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
  3 *
  4 * Copyright 2011 Freescale Semiconductor Inc.
  5 *
  6 * Redistribution and use in source and binary forms, with or without
  7 * modification, are permitted provided that the following conditions are met:
  8 *     * Redistributions of source code must retain the above copyright
  9 *       notice, this list of conditions and the following disclaimer.
 10 *     * Redistributions in binary form must reproduce the above copyright
 11 *       notice, this list of conditions and the following disclaimer in the
 12 *       documentation and/or other materials provided with the distribution.
 13 *     * Neither the name of Freescale Semiconductor nor the
 14 *       names of its contributors may be used to endorse or promote products
 15 *       derived from this software without specific prior written permission.
 16 *
 17 *
 18 * ALTERNATIVELY, this software may be distributed under the terms of the
 19 * GNU General Public License ("GPL") as published by the Free Software
 20 * Foundation, either version 2 of that License or (at your option) any
 21 * later version.
 22 *
 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 33 */
 34
 35&lbc {
 36	nor@0,0 {
 37		#address-cells = <1>;
 38		#size-cells = <1>;
 39		compatible = "cfi-flash";
 40		reg = <0x0 0x0 0x1000000>;
 41		bank-width = <2>;
 42		device-width = <1>;
 43
 44		partition@0 {
 45			/* This location must not be altered  */
 46			/* 256KB for Vitesse 7385 Switch firmware */
 47			reg = <0x0 0x00040000>;
 48			label = "NOR Vitesse-7385 Firmware";
 49			read-only;
 50		};
 51
 52		partition@40000 {
 53			/* 256KB for DTB Image */
 54			reg = <0x00040000 0x00040000>;
 55			label = "NOR DTB Image";
 56		};
 57
 58		partition@80000 {
 59			/* 3.5 MB for Linux Kernel Image */
 60			reg = <0x00080000 0x00380000>;
 61			label = "NOR Linux Kernel Image";
 62		};
 63
 64		partition@400000 {
 65			/* 11MB for JFFS2 based Root file System */
 66			reg = <0x00400000 0x00b00000>;
 67			label = "NOR JFFS2 Root File System";
 68		};
 69
 70		partition@f00000 {
 71			/* This location must not be altered  */
 72			/* 512KB for u-boot Bootloader Image */
 73			/* 512KB for u-boot Environment Variables */
 74			reg = <0x00f00000 0x00100000>;
 75			label = "NOR U-Boot Image";
 76			read-only;
 77		};
 78	};
 79
 80	nand@1,0 {
 81		#address-cells = <1>;
 82		#size-cells = <1>;
 83		compatible = "fsl,p1025-fcm-nand",
 84			     "fsl,elbc-fcm-nand";
 85		reg = <0x1 0x0 0x40000>;
 86
 87		partition@0 {
 88			/* This location must not be altered  */
 89			/* 1MB for u-boot Bootloader Image */
 90			reg = <0x0 0x00100000>;
 91			label = "NAND U-Boot Image";
 92			read-only;
 93		};
 94
 95		partition@100000 {
 96			/* 1MB for DTB Image */
 97			reg = <0x00100000 0x00100000>;
 98			label = "NAND DTB Image";
 99		};
100
101		partition@200000 {
102			/* 4MB for Linux Kernel Image */
103			reg = <0x00200000 0x00400000>;
104			label = "NAND Linux Kernel Image";
105		};
106
107		partition@600000 {
108			/* 4MB for Compressed Root file System Image */
109			reg = <0x00600000 0x00400000>;
110			label = "NAND Compressed RFS Image";
111		};
112
113		partition@a00000 {
114			/* 7MB for JFFS2 based Root file System */
115			reg = <0x00a00000 0x00700000>;
116			label = "NAND JFFS2 Root File System";
117		};
118
119		partition@1100000 {
120			/* 15MB for JFFS2 based Root file System */
121			reg = <0x01100000 0x00f00000>;
122			label = "NAND Writable User area";
123		};
124	};
125
126};
127
128&soc {
129	i2c@3000 {
130		rtc@68 {
131			compatible = "dallas,ds1339";
132			reg = <0x68>;
133		};
134	};
135
136	spi@7000 {
137		flash@0 {
138			#address-cells = <1>;
139			#size-cells = <1>;
140			compatible = "spansion,s25sl12801";
141			reg = <0>;
142			spi-max-frequency = <40000000>; /* input clock */
143
144			partition@u-boot {
145				/* 512KB for u-boot Bootloader Image */
146				reg = <0x0 0x00080000>;
147				label = "u-boot";
148				read-only;
149			};
150
151			partition@dtb {
152				/* 512KB for DTB Image */
153				reg = <0x00080000 0x00080000>;
154				label = "dtb";
155			};
156
157			partition@kernel {
158				/* 4MB for Linux Kernel Image */
159				reg = <0x00100000 0x00400000>;
160				label = "kernel";
161			};
162
163			partition@fs {
164				/* 4MB for Compressed RFS Image */
165				reg = <0x00500000 0x00400000>;
166				label = "file system";
167			};
168
169			partition@jffs-fs {
170				/* 7MB for JFFS2 based RFS */
171				reg = <0x00900000 0x00700000>;
172				label = "file system jffs2";
173			};
174		};
175	};
176
177	usb@22000 {
178		phy_type = "ulpi";
179	};
180
181	/* USB2 is shared with localbus, so it must be disabled
182	   by default. We can't put 'status = "disabled";' here
183	   since U-Boot doesn't clear the status property when
184	   it enables USB2. OTOH, U-Boot does create a new node
185	   when there isn't any. So, just comment it out.
186	usb@23000 {
187		phy_type = "ulpi";
188	};
189	*/
190
191	mdio@24000 {
192		phy0: ethernet-phy@0 {
193			interrupt-parent = <&mpic>;
194			interrupts = <3 1>;
195			reg = <0x0>;
196		};
197
198		phy1: ethernet-phy@1 {
199			interrupt-parent = <&mpic>;
200			interrupts = <2 1>;
201			reg = <0x1>;
202		};
203
204		tbi0: tbi-phy@11 {
205			reg = <0x11>;
206			device_type = "tbi-phy";
207		};
208	};
209
210	mdio@25000 {
211		tbi1: tbi-phy@11 {
212			reg = <0x11>;
213			device_type = "tbi-phy";
214		};
215	};
216
217	mdio@26000 {
218		tbi2: tbi-phy@11 {
219			reg = <0x11>;
220			device_type = "tbi-phy";
221		};
222	};
223
224	enet0: ethernet@b0000 {
225		fixed-link = <1 1 1000 0 0>;
226		phy-connection-type = "rgmii-id";
227
228	};
229
230	enet1: ethernet@b1000 {
231		phy-handle = <&phy0>;
232		tbi-handle = <&tbi1>;
233		phy-connection-type = "sgmii";
234	};
235
236	enet2: ethernet@b2000 {
237		phy-handle = <&phy1>;
238		phy-connection-type = "rgmii-id";
239	};
240
241	par_io@e0100 {
242		#address-cells = <1>;
243		#size-cells = <1>;
244		reg = <0xe0100 0x60>;
245		ranges = <0x0 0xe0100 0x60>;
246		device_type = "par_io";
247		num-ports = <3>;
248		pio1: ucc_pin@01 {
249			pio-map = <
250		/* port  pin  dir  open_drain  assignment  has_irq */
251				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
252				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
253				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
254				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
255				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
256				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
257				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
258				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
259				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
260				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
261				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
262				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
263				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
264				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
265				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
266				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
267				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
268				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
269		};
270
271		pio2: ucc_pin@02 {
272			pio-map = <
273		/* port  pin  dir  open_drain  assignment  has_irq */
274				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
275				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
276				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
277				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
278				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
279				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
280				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
281				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
282				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
283				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
284		};
285	};
286};