PageRenderTime 18ms CodeModel.GetById 11ms app.highlight 5ms RepoModel.GetById 1ms app.codeStats 0ms

/arch/arm/mach-mmp/gplugd.c

https://github.com/AICP/kernel_google_msm
C | 199 lines | 146 code | 28 blank | 25 comment | 5 complexity | aa0053f017183ef7db9bd60bc98aaf77 MD5 | raw file
  1/*
  2 *  linux/arch/arm/mach-mmp/gplugd.c
  3 *
  4 *  Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
  5 *
  6 *  This program is free software; you can redistribute it and/or modify
  7 *  it under the terms of the GNU General Public License version 2 as
  8 *  publishhed by the Free Software Foundation.
  9 */
 10
 11#include <linux/init.h>
 12#include <linux/gpio.h>
 13
 14#include <asm/mach/arch.h>
 15#include <asm/mach-types.h>
 16
 17#include <mach/pxa168.h>
 18#include <mach/mfp-pxa168.h>
 19
 20#include "common.h"
 21
 22static unsigned long gplugd_pin_config[] __initdata = {
 23	/* UART3 */
 24	GPIO8_UART3_TXD,
 25	GPIO9_UART3_RXD,
 26	GPIO1O_UART3_CTS,
 27	GPIO11_UART3_RTS,
 28
 29	/* USB OTG PEN */
 30	GPIO18_GPIO,
 31
 32	/* MMC2 */
 33	GPIO28_MMC2_CMD,
 34	GPIO29_MMC2_CLK,
 35	GPIO30_MMC2_DAT0,
 36	GPIO31_MMC2_DAT1,
 37	GPIO32_MMC2_DAT2,
 38	GPIO33_MMC2_DAT3,
 39
 40	/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
 41	GPIO35_GPIO,
 42	GPIO36_GPIO, /* CEC Interrupt */
 43
 44	/* MMC1 */
 45	GPIO43_MMC1_CLK,
 46	GPIO49_MMC1_CMD,
 47	GPIO41_MMC1_DAT0,
 48	GPIO40_MMC1_DAT1,
 49	GPIO52_MMC1_DAT2,
 50	GPIO51_MMC1_DAT3,
 51	GPIO53_MMC1_CD,
 52
 53	/* LCD */
 54	GPIO56_LCD_FCLK_RD,
 55	GPIO57_LCD_LCLK_A0,
 56	GPIO58_LCD_PCLK_WR,
 57	GPIO59_LCD_DENA_BIAS,
 58	GPIO60_LCD_DD0,
 59	GPIO61_LCD_DD1,
 60	GPIO62_LCD_DD2,
 61	GPIO63_LCD_DD3,
 62	GPIO64_LCD_DD4,
 63	GPIO65_LCD_DD5,
 64	GPIO66_LCD_DD6,
 65	GPIO67_LCD_DD7,
 66	GPIO68_LCD_DD8,
 67	GPIO69_LCD_DD9,
 68	GPIO70_LCD_DD10,
 69	GPIO71_LCD_DD11,
 70	GPIO72_LCD_DD12,
 71	GPIO73_LCD_DD13,
 72	GPIO74_LCD_DD14,
 73	GPIO75_LCD_DD15,
 74	GPIO76_LCD_DD16,
 75	GPIO77_LCD_DD17,
 76	GPIO78_LCD_DD18,
 77	GPIO79_LCD_DD19,
 78	GPIO80_LCD_DD20,
 79	GPIO81_LCD_DD21,
 80	GPIO82_LCD_DD22,
 81	GPIO83_LCD_DD23,
 82
 83	/* GPIO */
 84	GPIO84_GPIO,
 85	GPIO85_GPIO,
 86
 87	/* Fast-Ethernet*/
 88	GPIO86_TX_CLK,
 89	GPIO87_TX_EN,
 90	GPIO88_TX_DQ3,
 91	GPIO89_TX_DQ2,
 92	GPIO90_TX_DQ1,
 93	GPIO91_TX_DQ0,
 94	GPIO92_MII_CRS,
 95	GPIO93_MII_COL,
 96	GPIO94_RX_CLK,
 97	GPIO95_RX_ER,
 98	GPIO96_RX_DQ3,
 99	GPIO97_RX_DQ2,
100	GPIO98_RX_DQ1,
101	GPIO99_RX_DQ0,
102	GPIO100_MII_MDC,
103	GPIO101_MII_MDIO,
104	GPIO103_RX_DV,
105	GPIO104_GPIO,     /* Reset PHY */
106
107	/* RTC interrupt */
108	GPIO102_GPIO,
109
110	/* I2C */
111	GPIO105_CI2C_SDA,
112	GPIO106_CI2C_SCL,
113
114	/* SPI NOR Flash on SSP2 */
115	GPIO107_SSP2_RXD,
116	GPIO108_SSP2_TXD,
117	GPIO110_GPIO,     /* SPI_CSn */
118	GPIO111_SSP2_CLK,
119
120	/* Select JTAG */
121	GPIO109_GPIO,
122
123	/* I2S */
124	GPIO114_I2S_FRM,
125	GPIO115_I2S_BCLK,
126	GPIO116_I2S_TXD
127};
128
129static struct i2c_board_info gplugd_i2c_board_info[] = {
130	{
131		.type = "isl1208",
132		.addr = 0x6F,
133	}
134};
135
136/* Bring PHY out of reset by setting GPIO 104 */
137static int gplugd_eth_init(void)
138{
139	if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
140		printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
141				"PHY out of reset\n");
142		return -EIO;
143	}
144
145	gpio_direction_output(104, 1);
146	gpio_free(104);
147	return 0;
148}
149
150struct pxa168_eth_platform_data gplugd_eth_platform_data = {
151	.port_number = 0,
152	.phy_addr    = 0,
153	.speed       = 0, /* Autonagotiation */
154	.init        = gplugd_eth_init,
155};
156
157static void __init select_disp_freq(void)
158{
159	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
160	if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
161		printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
162				"frequency\n");
163	} else {
164		gpio_direction_output(35, 1);
165		gpio_free(35);
166	}
167
168	if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
169		printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
170				"frequency\n");
171	} else {
172		gpio_direction_output(85, 0);
173		gpio_free(85);
174	}
175}
176
177static void __init gplugd_init(void)
178{
179	mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
180
181	select_disp_freq();
182
183	/* on-chip devices */
184	pxa168_add_uart(3);
185	pxa168_add_ssp(1);
186	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
187	platform_device_register(&pxa168_device_gpio);
188
189	pxa168_add_eth(&gplugd_eth_platform_data);
190}
191
192MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
193	.map_io		= mmp_map_io,
194	.nr_irqs	= MMP_NR_IRQS,
195	.init_irq       = pxa168_init_irq,
196	.timer          = &pxa168_timer,
197	.init_machine   = gplugd_init,
198	.restart	= pxa168_restart,
199MACHINE_END