PageRenderTime 37ms CodeModel.GetById 29ms app.highlight 3ms RepoModel.GetById 2ms app.codeStats 0ms

/drivers/net/arcnet/Kconfig

http://github.com/mirrors/linux
#! | 133 lines | 110 code | 23 blank | 0 comment | 0 complexity | 38eb4eb335772a3c6c897ad2966506f5 MD5 | raw file
  1#
  2# Arcnet configuration
  3#
  4
  5menuconfig ARCNET
  6	depends on NETDEVICES && (ISA || PCI || PCMCIA)
  7	tristate "ARCnet support"
  8	---help---
  9	  If you have a network card of this type, say Y and check out the
 10	  (arguably) beautiful poetry in
 11	  <file:Documentation/networking/arcnet.txt>.
 12
 13	  You need both this driver, and the driver for the particular ARCnet
 14	  chipset of your card. If you don't know, then it's probably a
 15	  COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
 16	  support" below.
 17
 18	  To compile this driver as a module, choose M here. The module will
 19	  be called arcnet.
 20
 21if ARCNET
 22
 23config ARCNET_1201
 24	tristate "Enable standard ARCNet packet format (RFC 1201)"
 25	help
 26	  This allows you to use RFC1201 with your ARCnet card via the virtual
 27	  arc0 device.  You need to say Y here to communicate with
 28	  industry-standard RFC1201 implementations, like the arcether.com
 29	  packet driver or most DOS/Windows ODI drivers.  Please read the
 30	  ARCnet documentation in <file:Documentation/networking/arcnet.txt>
 31	  for more information about using arc0.
 32
 33config ARCNET_1051
 34	tristate "Enable old ARCNet packet format (RFC 1051)"
 35	---help---
 36	  This allows you to use RFC1051 with your ARCnet card via the virtual
 37	  arc0s device. You only need arc0s if you want to talk to ARCnet
 38	  software complying with the "old" standard, specifically, the DOS
 39	  arcnet.com packet driver, Amigas running AmiTCP, and some variants
 40	  of NetBSD. You do not need to say Y here to communicate with
 41	  industry-standard RFC1201 implementations, like the arcether.com
 42	  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
 43	  automatically as the arc0 device. Please read the ARCnet
 44	  documentation in <file:Documentation/networking/arcnet.txt> for more
 45	  information about using arc0e and arc0s.
 46
 47config ARCNET_RAW
 48	tristate "Enable raw mode packet interface"
 49	help
 50	  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
 51	  to work unless talking to a copy of the same Linux arcnet driver,
 52	  but perhaps marginally faster in that case.
 53
 54config ARCNET_CAP
 55	tristate "Enable CAP mode packet interface"
 56	help
 57	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
 58          acknowledge back to userspace. After the initial protocol byte every
 59          packet is stuffed with an extra 4 byte "cookie" which doesn't
 60          actually appear on the network. After transmit the driver will send
 61          back a packet with protocol byte 0 containing the status of the
 62          transmission:
 63             0=no hardware acknowledge
 64             1=excessive nak
 65             2=transmission accepted by the receiver hardware
 66
 67          Received packets are also stuffed with the extra 4 bytes but it will
 68          be random data.
 69
 70          Cap only listens to protocol 1-8.
 71
 72config ARCNET_COM90xx
 73	tristate "ARCnet COM90xx (normal) chipset driver"
 74	help
 75	  This is the chipset driver for the standard COM90xx cards. If you
 76	  have always used the old ARCnet driver without knowing what type of
 77	  card you had, this is probably the one for you.
 78
 79	  To compile this driver as a module, choose M here. The module will
 80	  be called com90xx.
 81
 82config ARCNET_COM90xxIO
 83	tristate "ARCnet COM90xx (IO mapped) chipset driver"
 84	---help---
 85	  This is the chipset driver for the COM90xx cards, using them in
 86	  IO-mapped mode instead of memory-mapped mode. This is slower than
 87	  the normal driver. Only use it if your card doesn't support shared
 88	  memory.
 89
 90	  To compile this driver as a module, choose M here. The module will
 91	  be called com90io.
 92
 93config ARCNET_RIM_I
 94	tristate "ARCnet COM90xx (RIM I) chipset driver"
 95	---help---
 96	  This is yet another chipset driver for the COM90xx cards, but this
 97	  time only using memory-mapped mode, and no IO ports at all. This
 98	  driver is completely untested, so if you have one of these cards,
 99	  please mail <dwmw2@infradead.org>, especially if it works!
100
101	  To compile this driver as a module, choose M here. The module will
102	  be called arc-rimi.
103
104config ARCNET_COM20020
105	tristate "ARCnet COM20020 chipset driver"
106	depends on LEDS_CLASS
107	help
108	  This is the driver for the new COM20020 chipset. It supports such
109	  things as promiscuous mode, so packet sniffing is possible, and
110	  extra diagnostic information.
111
112	  To compile this driver as a module, choose M here. The module will
113	  be called com20020.
114
115config ARCNET_COM20020_ISA
116	tristate "Support for COM20020 on ISA"
117	depends on ARCNET_COM20020 && ISA
118
119config ARCNET_COM20020_PCI
120	tristate "Support for COM20020 on PCI"
121	depends on ARCNET_COM20020 && PCI
122
123config ARCNET_COM20020_CS
124	tristate "COM20020 ARCnet PCMCIA support"
125	depends on ARCNET_COM20020 && PCMCIA
126	help
127	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
128	  to your computer.
129
130	  To compile this driver as a module, choose M here: the module will be
131	  called com20020_cs.  If unsure, say N.
132
133endif # ARCNET