PageRenderTime 118ms CodeModel.GetById 116ms app.highlight 1ms RepoModel.GetById 0ms app.codeStats 1ms

/sane.d/qcam.conf

http://github.com/brinkman83/bashrc
Config | 12 lines | 12 code | 0 blank | 0 comment | 0 complexity | 7a30e22cd391b7992646723df280f4fe MD5 | raw file
 1#
 2# In order to use the qcam backend, you'll need to enable to line with
 3# the port address for your scanner.  You can enable multiple lines if
 4# you really have a QuickCam connect to each port.
 5#
 6#u0x37b # /dev/lp0 forced in unidir mode
 7#u0x378	# /dev/lp1 forced in unidir mode
 8#u0x278	# /dev/lp2 forced in unidir mode
 9#0x37b	# /dev/lp0
10#0x378	# /dev/lp1
11#0x278	# /dev/lp2
120x3bc	# /dev/lp0