/sane.d/saned.conf

 1# saned.conf
 2# Configuration for the saned daemon
 3
 4## Daemon options
 5# Port range for the data connection. Choose a range inside [1024 - 65535].
 6# Avoid specifying too large a range, for performance reasons.
 7#
 8# ONLY use this if your saned server is sitting behind a firewall. If your
 9# firewall is a Linux machine, we strongly recommend using the
10# Netfilter nf_conntrack_sane connection tracking module instead.
11#
12# data_portrange = 10000 - 10100
13
14
15## Access list
16# A list of host names, IP addresses or IP subnets (CIDR notation) that
17# are permitted to use local SANE devices. IPv6 addresses must be enclosed
18# in brackets, and should always be specified in their compressed form.
19#
20# The hostname matching is not case-sensitive.
21
22#scan-client.somedomain.firm
23#192.168.0.1
24#192.168.0.1/29
25#[2001:7a8:185e::42:12]
26#[2001:7a8:185e::42:12]/64
27
28# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and
29# /etc/services must also be properly configured to start
30# the saned daemon as documented in saned(8), services(4)
31# and inetd.conf(4) (or xinetd.conf(5)).