stm32f3xx_hal_conf.h

/nucleo-f303RE/include/stm32f3xx_hal_conf.h

https://bitbucket.org/teknohan/mastering-stm32-book-example
C Header | 341 lines | 159 code | 54 blank | 128 comment | 0 complexity | ce8b6200580002f76cf7e96f4716dbdb MD5 | raw file
Possible License(s): GPL-3.0

/**

  ******************************************************************************

  * @file    stm32f3xx_hal_conf.h

  * @brief   HAL configuration file.  

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>

  *

  * Redistribution and use in source and binary forms, with or without modification,

  * are permitted provided that the following conditions are met:

  *   1. Redistributions of source code must retain the above copyright notice,

  *      this list of conditions and the following disclaimer.

  *   2. Redistributions in binary form must reproduce the above copyright notice,

  *      this list of conditions and the following disclaimer in the documentation

  *      and/or other materials provided with the distribution.

  *   3. Neither the name of STMicroelectronics nor the names of its contributors

  *      may be used to endorse or promote products derived from this software

  *      without specific prior written permission.

  *

  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  *

  ******************************************************************************

  */ 



/* Define to prevent recursive inclusion -------------------------------------*/

#ifndef __STM32F3xx_HAL_CONF_H

#define __STM32F3xx_HAL_CONF_H



#ifdef __cplusplus

 extern "C" {

#endif



#include "mxconstants.h" 



/* Exported types ------------------------------------------------------------*/

/* Exported constants --------------------------------------------------------*/



/* ########################## Module Selection ############################## */

/**

  * @brief This is the list of modules to be used in the HAL driver 

  */

  

#define HAL_MODULE_ENABLED  

#define HAL_ADC_MODULE_ENABLED

//#define HAL_CAN_MODULE_ENABLED   

//#define HAL_CEC_MODULE_ENABLED   

//#define HAL_NAND_MODULE_ENABLED   

//#define HAL_NOR_MODULE_ENABLED   

//#define HAL_PCCARD_MODULE_ENABLED   

//#define HAL_SRAM_MODULE_ENABLED   

//#define HAL_HRTIM_MODULE_ENABLED   

//#define HAL_OPAMP_MODULE_ENABLED   

//#define HAL_SDADC_MODULE_ENABLED   

//#define HAL_TSC_MODULE_ENABLED   

//#define HAL_COMP_MODULE_ENABLED   

#define HAL_CRC_MODULE_ENABLED

//#define HAL_CRYP_MODULE_ENABLED   

#define HAL_DAC_MODULE_ENABLED

#define HAL_I2C_MODULE_ENABLED

//#define HAL_I2S_MODULE_ENABLED   

//#define HAL_IWDG_MODULE_ENABLED   

//#define HAL_LCD_MODULE_ENABLED   

//#define HAL_LPTIM_MODULE_ENABLED   

//#define HAL_RNG_MODULE_ENABLED   

//#define HAL_RTC_MODULE_ENABLED   

#define HAL_SPI_MODULE_ENABLED

#define HAL_TIM_MODULE_ENABLED

#define HAL_UART_MODULE_ENABLED

//#define HAL_USART_MODULE_ENABLED   

//#define HAL_IRDA_MODULE_ENABLED   

//#define HAL_SMARTCARD_MODULE_ENABLED   

//#define HAL_SMBUS_MODULE_ENABLED   

//#define HAL_WWDG_MODULE_ENABLED   

//#define HAL_PCD_MODULE_ENABLED   

#define HAL_GPIO_MODULE_ENABLED

#define HAL_DMA_MODULE_ENABLED

#define HAL_RCC_MODULE_ENABLED

#define HAL_FLASH_MODULE_ENABLED

#define HAL_PWR_MODULE_ENABLED

#define HAL_CORTEX_MODULE_ENABLED

/* ########################## HSE/HSI Values adaptation ##################### */

/**

  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

  *        This value is used by the RCC HAL module to compute the system frequency

  *        (when HSE is used as system clock source, directly or through the PLL).  

  */

#if !defined  (HSE_VALUE) 

  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */

#endif /* HSE_VALUE */



/**

  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 

  *        Timeout value 

  */

#if !defined  (HSE_STARTUP_TIMEOUT)

  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */

#endif /* HSE_STARTUP_TIMEOUT */



/**

  * @brief Internal High Speed oscillator (HSI) value.

  *        This value is used by the RCC HAL module to compute the system frequency

  *        (when HSI is used as system clock source, directly or through the PLL). 

  */

#if !defined  (HSI_VALUE)

  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/

#endif /* HSI_VALUE */



/**

  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 

  *        Timeout value 

  */

#if !defined  (HSI_STARTUP_TIMEOUT) 

 #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */

#endif /* HSI_STARTUP_TIMEOUT */  



/**

  * @brief Internal Low Speed oscillator (LSI) value.

  */

#if !defined  (LSI_VALUE) 

 #define LSI_VALUE  ((uint32_t)40000)    

#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz

                                             The real value may vary depending on the variations

                                             in voltage and temperature.  */

/**

  * @brief External Low Speed oscillator (LSE) value.

  */

#if !defined  (LSE_VALUE)

 #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */

#endif /* LSE_VALUE */     



/**

  * @brief Time out for LSE start up value in ms.

  */

#if !defined  (LSE_STARTUP_TIMEOUT)

  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */

#endif /* LSE_STARTUP_TIMEOUT */



/**

  * @brief External clock source for I2S peripheral

  *        This value is used by the I2S HAL module to compute the I2S clock source 

  *        frequency, this source is inserted directly through I2S_CKIN pad.

  *        - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)

  *        - External clock not generated on EVAL 373

  */

#if !defined  (EXTERNAL_CLOCK_VALUE)

  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/

#endif /* EXTERNAL_CLOCK_VALUE */



/* Tip: To avoid modifying this file each time you need to use different HSE,

   ===  you can define the HSE value in your toolchain compiler preprocessor. */



/* ########################### System Configuration ######################### */

/**

  * @brief This is the HAL system configuration section

  */     



#define  VDD_VALUE                   ((uint32_t)3300) /*!< Value of VDD in mv */

#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */            

#define  USE_RTOS                     0

#define  PREFETCH_ENABLE              1

#define  INSTRUCTION_CACHE_ENABLE     0

#define  DATA_CACHE_ENABLE            0



/* ########################## Assert Selection ############################## */

/**

  * @brief Uncomment the line below to expanse the "assert_param" macro in the 

  *        HAL drivers code

  */

/* #define USE_FULL_ASSERT    1 */



/* Includes ------------------------------------------------------------------*/

/**

  * @brief Include module's header file 

  */



#ifdef HAL_RCC_MODULE_ENABLED

 #include "stm32f3xx_hal_rcc.h"

#endif /* HAL_RCC_MODULE_ENABLED */



#ifdef HAL_GPIO_MODULE_ENABLED

 #include "stm32f3xx_hal_gpio.h"

#endif /* HAL_GPIO_MODULE_ENABLED */



#ifdef HAL_DMA_MODULE_ENABLED

  #include "stm32f3xx_hal_dma.h"

#endif /* HAL_DMA_MODULE_ENABLED */

   

#ifdef HAL_CORTEX_MODULE_ENABLED

 #include "stm32f3xx_hal_cortex.h"

#endif /* HAL_CORTEX_MODULE_ENABLED */



#ifdef HAL_ADC_MODULE_ENABLED

 #include "stm32f3xx_hal_adc.h"

#endif /* HAL_ADC_MODULE_ENABLED */



#ifdef HAL_CAN_MODULE_ENABLED

 #include "stm32f3xx_hal_can.h"

#endif /* HAL_CAN_MODULE_ENABLED */



#ifdef HAL_CEC_MODULE_ENABLED

 #include "stm32f3xx_hal_cec.h"

#endif /* HAL_CEC_MODULE_ENABLED */



#ifdef HAL_COMP_MODULE_ENABLED

 #include "stm32f3xx_hal_comp.h"

#endif /* HAL_COMP_MODULE_ENABLED */



#ifdef HAL_CRC_MODULE_ENABLED

 #include "stm32f3xx_hal_crc.h"

#endif /* HAL_CRC_MODULE_ENABLED */



#ifdef HAL_DAC_MODULE_ENABLED

 #include "stm32f3xx_hal_dac.h"

#endif /* HAL_DAC_MODULE_ENABLED */



#ifdef HAL_FLASH_MODULE_ENABLED

 #include "stm32f3xx_hal_flash.h"

#endif /* HAL_FLASH_MODULE_ENABLED */



#ifdef HAL_SRAM_MODULE_ENABLED

  #include "stm32f3xx_hal_sram.h"

#endif /* HAL_SRAM_MODULE_ENABLED */



#ifdef HAL_NOR_MODULE_ENABLED

  #include "stm32f3xx_hal_nor.h"

#endif /* HAL_NOR_MODULE_ENABLED */



#ifdef HAL_NAND_MODULE_ENABLED

  #include "stm32f3xx_hal_nand.h"

#endif /* HAL_NAND_MODULE_ENABLED */



#ifdef HAL_PCCARD_MODULE_ENABLED

  #include "stm32f3xx_hal_pccard.h"

#endif /* HAL_PCCARD_MODULE_ENABLED */ 



#ifdef HAL_HRTIM_MODULE_ENABLED

 #include "stm32f3xx_hal_hrtim.h"

#endif /* HAL_HRTIM_MODULE_ENABLED */



#ifdef HAL_I2C_MODULE_ENABLED

 #include "stm32f3xx_hal_i2c.h"

#endif /* HAL_I2C_MODULE_ENABLED */



#ifdef HAL_I2S_MODULE_ENABLED

 #include "stm32f3xx_hal_i2s.h"

#endif /* HAL_I2S_MODULE_ENABLED */



#ifdef HAL_IRDA_MODULE_ENABLED

 #include "stm32f3xx_hal_irda.h"

#endif /* HAL_IRDA_MODULE_ENABLED */



#ifdef HAL_IWDG_MODULE_ENABLED

 #include "stm32f3xx_hal_iwdg.h"

#endif /* HAL_IWDG_MODULE_ENABLED */



#ifdef HAL_OPAMP_MODULE_ENABLED

 #include "stm32f3xx_hal_opamp.h"

#endif /* HAL_OPAMP_MODULE_ENABLED */



#ifdef HAL_PCD_MODULE_ENABLED

 #include "stm32f3xx_hal_pcd.h"

#endif /* HAL_PCD_MODULE_ENABLED */



#ifdef HAL_PWR_MODULE_ENABLED

 #include "stm32f3xx_hal_pwr.h"

#endif /* HAL_PWR_MODULE_ENABLED */



#ifdef HAL_RTC_MODULE_ENABLED

 #include "stm32f3xx_hal_rtc.h"

#endif /* HAL_RTC_MODULE_ENABLED */



#ifdef HAL_SDADC_MODULE_ENABLED

 #include "stm32f3xx_hal_sdadc.h"

#endif /* HAL_SDADC_MODULE_ENABLED */



#ifdef HAL_SMARTCARD_MODULE_ENABLED

 #include "stm32f3xx_hal_smartcard.h"

#endif /* HAL_SMARTCARD_MODULE_ENABLED */



#ifdef HAL_SMBUS_MODULE_ENABLED

 #include "stm32f3xx_hal_smbus.h"

#endif /* HAL_SMBUS_MODULE_ENABLED */



#ifdef HAL_SPI_MODULE_ENABLED

 #include "stm32f3xx_hal_spi.h"

#endif /* HAL_SPI_MODULE_ENABLED */



#ifdef HAL_TIM_MODULE_ENABLED

 #include "stm32f3xx_hal_tim.h"

#endif /* HAL_TIM_MODULE_ENABLED */



#ifdef HAL_TSC_MODULE_ENABLED

 #include "stm32f3xx_hal_tsc.h"

#endif /* HAL_TSC_MODULE_ENABLED */



#ifdef HAL_UART_MODULE_ENABLED

 #include "stm32f3xx_hal_uart.h"

#endif /* HAL_UART_MODULE_ENABLED */



#ifdef HAL_USART_MODULE_ENABLED

 #include "stm32f3xx_hal_usart.h"

#endif /* HAL_USART_MODULE_ENABLED */



#ifdef HAL_WWDG_MODULE_ENABLED

 #include "stm32f3xx_hal_wwdg.h"

#endif /* HAL_WWDG_MODULE_ENABLED */



/* Exported macro ------------------------------------------------------------*/

#ifdef  USE_FULL_ASSERT

/**

  * @brief  The assert_param macro is used for function's parameters check.

  * @param  expr: If expr is false, it calls assert_failed function

  *         which reports the name of the source file and the source

  *         line number of the call that failed. 

  *         If expr is true, it returns no value.

  * @retval None

  */

  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))

/* Exported functions ------------------------------------------------------- */

  void assert_failed(uint8_t* file, uint32_t line);

#else

  #define assert_param(expr) ((void)0)

#endif /* USE_FULL_ASSERT */    

    

#ifdef __cplusplus

}

#endif



#endif /* __STM32F3xx_HAL_CONF_H */



/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/