/matlab_tools/Converted/kkwinset.m
Objective C | 249 lines | 246 code | 3 blank | 0 comment | 66 complexity | 8583b41cc9e4109cf672635697db00cf MD5 | raw file
Possible License(s): BSD-3-Clause
- %kkwinset ' '
- % This MatLab function was automatically generated by a converter (KhorosToMatLab) from the Khoros kwinset.pane file
- %
- % Parameters:
- % InputFile: i1 'Input Object', required: 'Input object to inset subband to.'
- % InputFile: i2 'Input Subband', required: 'input subband for inseting.'
- % OutputFile: o 'Output Object', required: 'Resulting output data object'
- % Toggle: attr 'Use Input 2 Sub-Object Position (unless overridden below)', default: 0: 'Insert at i2 subobject position (attribute) - w,h,d,t,e will override if specified'
- % Integer: wl 'Width ', default: 1: 'Number of layers in the width direction.'
- % Integer: hl 'Height ', default: 1: 'Number of layers in the height direction.'
- % Integer: dl 'Depth ', default: 1: 'Number of layers in the depth direction.'
- % Integer: tl 'Time ', default: 1: 'Number of layers in the time direction.'
- % Integer: el 'Elements ', default: 1: 'Number of layers in the elements direction.'
- %
- % Example: o = kkwinset({i1, i2}, {'i1','';'i2','';'o','';'attr',0;'wl',1;'hl',1;'dl',1;'tl',1;'el',1})
- %
- % Khoros helpfile follows below:
- %
- % PROGRAM
- % kwinset - inset of subbands into a wavelet object
- %
- % DESCRIPTION
- % NOTE: The terms band and subband in this routine refers to Wavelet Analysis.
- % The Inset Subband operator, kwinset, insets data from "Input 2" (i2) into
- % "Input 1" (i1) at the specified position, replacing the data in
- % "Input 1". The resulting \fIOutput\fP object (o) size will be at
- % least the size of Input 1, and may be larger, depending on the specified
- % position values and the size of "Input 2".
- %
- % The inset operation is based on implicit indexing. This means
- % that if location or time data exist, the inset
- % operation is not done in terms an interpretation of
- % the location/time data values, but in terms of the
- % implicit indexing of these data (which is specified
- % by the Width, Height, Depth, Time, Elements indices
- % of the polymorphic data model). If location and/or time
- % data exist in either input object, the output object will
- % also contain location and/or time data.
- %
- % The position in Input 1 where Input 2 will be inset
- % can be determined from the Sub-Object Position attribute
- % that is stored in Input 2, or specified by the Width (w and wl),
- % Height (h and hl) , Depth (d and dl), Time (t and tl), and Elements (e and el)
- % Select Subband and Select Level parameters. The combination of these
- % two parameters (Subband Selection and Subband Level) will define the size of
- % the subband to be inseted . Basicaly, what "Subband Inset" does is to
- % get the total size of a selected dimension defined by the Select Subband
- % parameter and divide this dimension by two to the number defined by
- % the related Subband Level parameter, the obtained number defines the
- % size of the subband in that dimension. If the Select Subband parameter
- % for a selected dimension is equal to "High" then the origin of the
- % subband in that dimension will be equal to the size of the subband in that
- % dimension, if the Select Subband parameter for a selected dimension is
- % "Low" the subband origin in that dimension is set to 0. The previous
- % process is repeated for each selected dimension. The subobject position
- % attribute is automatically set by programs such as the Extract Subband
- % operator (kwextract). Using a combination of the subobject position attribute
- % and the explicit coordinates is valid.
- %
- % In some instances, padding is necessary to
- % maintain the integrity of the polymorphic data model -
- % for example when the final size of the Output
- % object is larger than that of Input 1. The Real
- % and Imaginary Pad Values (real, imag) define the values that
- % will be used when padding.
- %
- % If padding occurs, and the option to "Identify padded data added
- % by this program as Valid" is selected (valid TRUE), all padded data
- % is considered valid and, if either input object contains a validity mask,
- % the output object will have a mask, and the mask value for the padded
- % data will be 1. The output object will not contain a mask if
- % neither input object has a mask. If padded data is to
- % be identified as Invalid (valid FALSE), the padded data will be
- % masked as invalid (0). In this case, even if neither input object has
- % a validity mask, the output object will have one.
- %
- % "Data Type" 5
- % .cI $DATAMANIP/repos/shared/man/sections/value_type_2input
- %
- % "Map Data" 5
- % .cI $DATAMANIP/repos/shared/man/sections/map_2input
- %
- % "Failure Modes" 5
- % This program will fail if either input object lacks value data.
- %
- %
- %
- % EXAMPLES
- %
- % "SEE ALSO"
- % kinsert, kextract
- %
- % RESTRICTIONS
- %
- % REFERENCES
- %
- % COPYRIGHT
- % Copyright (C) 1993 - 1997, Khoral Research, Inc. All rights reserved.
- %
- function varargout = kkwinset(varargin)
- if nargin ==0
- Inputs={};arglist={'',''};
- elseif nargin ==1
- Inputs=varargin{1};arglist={'',''};
- elseif nargin ==2
- Inputs=varargin{1}; arglist=varargin{2};
- else error('Usage: [out1,..] = kkwinset(Inputs,arglist).');
- end
- if size(arglist,2)~=2
- error('arglist must be of form {''ParameterTag1'',value1;''ParameterTag2'',value2}')
- end
- narglist={'i1', '__input';'i2', '__input';'o', '__output';'attr', 0;'wl', 1;'hl', 1;'dl', 1;'tl', 1;'el', 1};
- maxval={0,0,0,0,2,2,2,2,2};
- minval={0,0,0,0,2,2,2,2,2};
- istoggle=[0,0,0,1,1,1,1,1,1];
- was_set=istoggle * 0;
- paramtype={'InputFile','InputFile','OutputFile','Toggle','Integer','Integer','Integer','Integer','Integer'};
- % identify the input arrays and assign them to the arguments as stated by the user
- if ~iscell(Inputs)
- Inputs = {Inputs};
- end
- NumReqOutputs=1; nextinput=1; nextoutput=1;
- for ii=1:size(arglist,1)
- wasmatched=0;
- for jj=1:size(narglist,1)
- if strcmp(arglist{ii,1},narglist{jj,1}) % a given argument was matched to the possible arguments
- wasmatched = 1;
- was_set(jj) = 1;
- if strcmp(narglist{jj,2}, '__input')
- if (nextinput > length(Inputs))
- error(['Input ' narglist{jj,1} ' has no corresponding input!']);
- end
- narglist{jj,2} = 'OK_in';
- nextinput = nextinput + 1;
- elseif strcmp(narglist{jj,2}, '__output')
- if (nextoutput > nargout)
- error(['Output nr. ' narglist{jj,1} ' is not present in the assignment list of outputs !']);
- end
- if (isempty(arglist{ii,2}))
- narglist{jj,2} = 'OK_out';
- else
- narglist{jj,2} = arglist{ii,2};
- end
- nextoutput = nextoutput + 1;
- if (minval{jj} == 0)
- NumReqOutputs = NumReqOutputs - 1;
- end
- elseif isstr(arglist{ii,2})
- narglist{jj,2} = arglist{ii,2};
- else
- if strcmp(paramtype{jj}, 'Integer') & (round(arglist{ii,2}) ~= arglist{ii,2})
- error(['Argument ' arglist{ii,1} ' is of integer type but non-integer number ' arglist{ii,2} ' was supplied']);
- end
- if (minval{jj} ~= 0 | maxval{jj} ~= 0)
- if (minval{jj} == 1 & maxval{jj} == 1 & arglist{ii,2} < 0)
- error(['Argument ' arglist{ii,1} ' must be bigger or equal to zero!']);
- elseif (minval{jj} == -1 & maxval{jj} == -1 & arglist{ii,2} > 0)
- error(['Argument ' arglist{ii,1} ' must be smaller or equal to zero!']);
- elseif (minval{jj} == 2 & maxval{jj} == 2 & arglist{ii,2} <= 0)
- error(['Argument ' arglist{ii,1} ' must be bigger than zero!']);
- elseif (minval{jj} == -2 & maxval{jj} == -2 & arglist{ii,2} >= 0)
- error(['Argument ' arglist{ii,1} ' must be smaller than zero!']);
- elseif (minval{jj} ~= maxval{jj} & arglist{ii,2} < minval{jj})
- error(['Argument ' arglist{ii,1} ' must be bigger than ' num2str(minval{jj})]);
- elseif (minval{jj} ~= maxval{jj} & arglist{ii,2} > maxval{jj})
- error(['Argument ' arglist{ii,1} ' must be smaller than ' num2str(maxval{jj})]);
- end
- end
- end
- if ~strcmp(narglist{jj,2},'OK_out') & ~strcmp(narglist{jj,2},'OK_in')
- narglist{jj,2} = arglist{ii,2};
- end
- end
- end
- if (wasmatched == 0 & ~strcmp(arglist{ii,1},''))
- error(['Argument ' arglist{ii,1} ' is not a valid argument for this function']);
- end
- end
- % match the remaining inputs/outputs to the unused arguments and test for missing required inputs
- for jj=1:size(narglist,1)
- if strcmp(paramtype{jj}, 'Toggle')
- if (narglist{jj,2} ==0)
- narglist{jj,1} = '';
- end;
- narglist{jj,2} = '';
- end;
- if ~strcmp(narglist{jj,2},'__input') && ~strcmp(narglist{jj,2},'__output') && istoggle(jj) && ~ was_set(jj)
- narglist{jj,1} = '';
- narglist{jj,2} = '';
- end;
- if strcmp(narglist{jj,2}, '__input')
- if (minval{jj} == 0) % meaning this input is required
- if (nextinput > size(Inputs))
- error(['Required input ' narglist{jj,1} ' has no corresponding input in the list!']);
- else
- narglist{jj,2} = 'OK_in';
- nextinput = nextinput + 1;
- end
- else % this is an optional input
- if (nextinput <= length(Inputs))
- narglist{jj,2} = 'OK_in';
- nextinput = nextinput + 1;
- else
- narglist{jj,1} = '';
- narglist{jj,2} = '';
- end;
- end;
- else
- if strcmp(narglist{jj,2}, '__output')
- if (minval{jj} == 0) % this is a required output
- if (nextoutput > nargout & nargout > 1)
- error(['Required output ' narglist{jj,1} ' is not stated in the assignment list!']);
- else
- narglist{jj,2} = 'OK_out';
- nextoutput = nextoutput + 1;
- NumReqOutputs = NumReqOutputs-1;
- end
- else % this is an optional output
- if (nargout - nextoutput >= NumReqOutputs)
- narglist{jj,2} = 'OK_out';
- nextoutput = nextoutput + 1;
- else
- narglist{jj,1} = '';
- narglist{jj,2} = '';
- end;
- end
- end
- end
- end
- if nargout
- varargout = cell(1,nargout);
- else
- varargout = cell(1,1);
- end
- global KhorosRoot
- if exist('KhorosRoot') && ~isempty(KhorosRoot)
- w=['"' KhorosRoot];
- else
- if ispc
- w='"C:\Program Files\dip\khorosBin\';
- else
- [s,w] = system('which cantata');
- w=['"' w(1:end-8)];
- end
- end
- [varargout{:}]=callKhoros([w 'kwinset" '],Inputs,narglist);