/variants/PNUCLEO_WB55RG/PeripheralPins.c

https://github.com/stm32duino/Arduino_Core_STM32 · C · 271 lines · 191 code · 33 blank · 47 comment · 0 complexity · 523203eb6e88f392a70121c7cb006dee MD5 · raw file 

    

  1. /*
    2. 

  2.  *******************************************************************************
    3. 

  3.  * Copyright (c) 2020, STMicroelectronics
    4. 

  4.  * All rights reserved.
    5. 

  5.  *
    6. 

  6.  * This software component is licensed by ST under BSD 3-Clause license,
    7. 

  7.  * the "License"; You may not use this file except in compliance with the
    8. 

  8.  * License. You may obtain a copy of the License at:
    9. 

  9.  *                        opensource.org/licenses/BSD-3-Clause
    10. 

  10.  *
    11. 

  11.  *******************************************************************************
    12. 

  12.  * Automatically generated from STM32WB55RGVx.xml
    13. 

  13.  */
    14. 

  14. #include "Arduino.h"
    15. 

  15. #include "PeripheralPins.h"
    16. 

  16. 

  17. /* =====
    18. 

  18.  * Note: Commented lines are alternative possibilities which are not used per default.
    19. 

  19.  *       If you change them, you will have to know what you do
    20. 

  20.  * =====
    21. 

  21.  */
    22. 

  22. 

  23. //*** ADC ***
    24. 

  24. 

  25. #ifdef HAL_ADC_MODULE_ENABLED
    26. 

  26. WEAK const PinMap PinMap_ADC[] = {
    27. 

  27.   {PA_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
    28. 

  28.   {PA_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
    29. 

  29.   //{PA_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
    30. 

  30.   //{PA_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
    31. 

  31.   //{PA_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
    32. 

  32.   //{PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
    33. 

  33.   //{PA_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
    34. 

  34.   //{PA_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
    35. 

  35.   //{PA_8,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
    36. 

  36.   //{PA_9,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
    37. 

  37.   {PC_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
    38. 

  38.   {PC_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
    39. 

  39.   {PC_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
    40. 

  40.   {PC_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
    41. 

  41.   //{PC_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
    42. 

  42.   //{PC_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
    43. 

  43.   {NC,    NP,    0}
    44. 

  44. };
    45. 

  45. #endif
    46. 

  46. 

  47. //*** No DAC ***
    48. 

  48. 

  49. //*** I2C ***
    50. 

  50. 

  51. #ifdef HAL_I2C_MODULE_ENABLED
    52. 

  52. WEAK const PinMap PinMap_I2C_SDA[] = {
    53. 

  53.   {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
    54. 

  54.   {PB_4,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    55. 

  55.   {PB_7,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
    56. 

  56.   {PB_9,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
    57. 

  57.   {PB_11, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    58. 

  58.   {PB_14, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    59. 

  59.   {PC_1,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    60. 

  60.   {NC,    NP,    0}
    61. 

  61. };
    62. 

  62. #endif
    63. 

  63. 

  64. #ifdef HAL_I2C_MODULE_ENABLED
    65. 

  65. WEAK const PinMap PinMap_I2C_SCL[] = {
    66. 

  66.   {PA_7,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    67. 

  67.   {PA_9,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
    68. 

  68.   {PB_6,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
    69. 

  69.   {PB_8,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
    70. 

  70.   {PB_10, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    71. 

  71.   {PB_13, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    72. 

  72.   {PC_0,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
    73. 

  73.   {NC,    NP,    0}
    74. 

  74. };
    75. 

  75. #endif
    76. 

  76. 

  77. //*** PWM ***
    78. 

  78. 

  79. #ifdef HAL_TIM_MODULE_ENABLED
    80. 

  80. WEAK const PinMap PinMap_PWM[] = {
    81. 

  81.   {PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
    82. 

  82.   {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
    83. 

  83.   {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
    84. 

  84.   {PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
    85. 

  85.   {PA_5,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
    86. 

  86.   {PA_6,  TIM16,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
    87. 

  87.   {PA_7,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
    88. 

  88.   //{PA_7,  TIM17,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
    89. 

  89.   {PA_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
    90. 

  90.   {PA_9,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
    91. 

  91.   {PA_10, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
    92. 

  92.   {PA_11, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
    93. 

  93.   {PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
    94. 

  94.   {PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
    95. 

  95.   //{PB_6,  TIM16,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
    96. 

  96.   //{PB_7,  TIM17,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
    97. 

  97.   //{PB_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
    98. 

  98.   {PB_8,  TIM16,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
    99. 

  99.   //{PB_9,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
    100. 

  100.   {PB_9,  TIM17,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
    101. 

  101.   {PB_10, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
    102. 

  102.   {PB_11, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
    103. 

  103.   {PB_13, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
    104. 

  104.   {PB_14, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
    105. 

  105.   {PB_15, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
    106. 

  106.   {NC,    NP,    0}
    107. 

  107. };
    108. 

  108. #endif
    109. 

  109. 

  110. //*** SERIAL ***
    111. 

  111. 

  112. #ifdef HAL_UART_MODULE_ENABLED
    113. 

  113. WEAK const PinMap PinMap_UART_TX[] = {
    114. 

  114.   {PA_2,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    115. 

  115.   {PA_9,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    116. 

  116.   {PB_5,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    117. 

  117.   {PB_6,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    118. 

  118.   {PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    119. 

  119.   {PC_1,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    120. 

  120.   {NC,    NP,    0}
    121. 

  121. };
    122. 

  122. #endif
    123. 

  123. 

  124. #ifdef HAL_UART_MODULE_ENABLED
    125. 

  125. WEAK const PinMap PinMap_UART_RX[] = {
    126. 

  126.   {PA_3,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    127. 

  127.   {PA_10, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    128. 

  128.   {PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    129. 

  129.   {PB_7,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    130. 

  130.   {PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    131. 

  131.   {PC_0,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    132. 

  132.   {NC,    NP,    0}
    133. 

  133. };
    134. 

  134. #endif
    135. 

  135. 

  136. #ifdef HAL_UART_MODULE_ENABLED
    137. 

  137. WEAK const PinMap PinMap_UART_RTS[] = {
    138. 

  138.   {PA_12, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    139. 

  139.   {PB_1,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    140. 

  140.   {PB_3,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    141. 

  141.   {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    142. 

  142.   {NC,    NP,    0}
    143. 

  143. };
    144. 

  144. #endif
    145. 

  145. 

  146. #ifdef HAL_UART_MODULE_ENABLED
    147. 

  147. WEAK const PinMap PinMap_UART_CTS[] = {
    148. 

  148.   {PA_6,  LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    149. 

  149.   {PA_11, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    150. 

  150.   {PB_4,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
    151. 

  151.   {PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
    152. 

  152.   {NC,    NP,    0}
    153. 

  153. };
    154. 

  154. #endif
    155. 

  155. 

  156. //*** SPI ***
    157. 

  157. 

  158. #ifdef HAL_SPI_MODULE_ENABLED
    159. 

  159. WEAK const PinMap PinMap_SPI_MOSI[] = {
    160. 

  160.   {PA_7,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    161. 

  161.   {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    162. 

  162.   {PB_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    163. 

  163.   {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    164. 

  164.   {PC_1,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
    165. 

  165.   {PC_3,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    166. 

  166.   {NC,    NP,    0}
    167. 

  167. };
    168. 

  168. #endif
    169. 

  169. 

  170. #ifdef HAL_SPI_MODULE_ENABLED
    171. 

  171. WEAK const PinMap PinMap_SPI_MISO[] = {
    172. 

  172.   {PA_6,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    173. 

  173.   {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    174. 

  174.   {PB_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    175. 

  175.   {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    176. 

  176.   {PC_2,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    177. 

  177.   {NC,    NP,    0}
    178. 

  178. };
    179. 

  179. #endif
    180. 

  180. 

  181. #ifdef HAL_SPI_MODULE_ENABLED
    182. 

  182. WEAK const PinMap PinMap_SPI_SCLK[] = {
    183. 

  183.   {PA_1,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    184. 

  184.   {PA_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    185. 

  185.   {PA_9,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    186. 

  186.   {PB_3,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    187. 

  187.   {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    188. 

  188.   {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    189. 

  189.   {PD_1,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    190. 

  190.   {NC,    NP,    0}
    191. 

  191. };
    192. 

  192. #endif
    193. 

  193. 

  194. #ifdef HAL_SPI_MODULE_ENABLED
    195. 

  195. WEAK const PinMap PinMap_SPI_SSEL[] = {
    196. 

  196.   {PA_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    197. 

  197.   {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    198. 

  198.   {PB_2,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
    199. 

  199.   {PB_9,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    200. 

  200.   {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    201. 

  201.   {PD_0,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
    202. 

  202.   {NC,    NP,    0}
    203. 

  203. };
    204. 

  204. #endif
    205. 

  205. 

  206. //*** No CAN ***
    207. 

  207. 

  208. //*** No ETHERNET ***
    209. 

  209. 

  210. //*** QUADSPI ***
    211. 

  211. 

  212. #ifdef HAL_QSPI_MODULE_ENABLED
    213. 

  213. WEAK const PinMap PinMap_QUADSPI_DATA0[] = {
    214. 

  214.   {PB_9,  QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
    215. 

  215.   {NC,    NP,    0}
    216. 

  216. };
    217. 

  217. #endif
    218. 

  218. 

  219. #ifdef HAL_QSPI_MODULE_ENABLED
    220. 

  220. WEAK const PinMap PinMap_QUADSPI_DATA1[] = {
    221. 

  221.   {PB_8,  QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
    222. 

  222.   {NC,    NP,    0}
    223. 

  223. };
    224. 

  224. #endif
    225. 

  225. 

  226. #ifdef HAL_QSPI_MODULE_ENABLED
    227. 

  227. WEAK const PinMap PinMap_QUADSPI_DATA2[] = {
    228. 

  228.   {PA_7,  QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
    229. 

  229.   {NC,    NP,    0}
    230. 

  230. };
    231. 

  231. #endif
    232. 

  232. 

  233. #ifdef HAL_QSPI_MODULE_ENABLED
    234. 

  234. WEAK const PinMap PinMap_QUADSPI_DATA3[] = {
    235. 

  235.   {PA_6,  QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
    236. 

  236.   {NC,    NP,    0}
    237. 

  237. };
    238. 

  238. #endif
    239. 

  239. 

  240. #ifdef HAL_QSPI_MODULE_ENABLED
    241. 

  241. WEAK const PinMap PinMap_QUADSPI_SCLK[] = {
    242. 

  242.   {PA_3,  QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
    243. 

  243.   {PB_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
    244. 

  244.   {NC,    NP,    0}
    245. 

  245. };
    246. 

  246. #endif
    247. 

  247. 

  248. #ifdef HAL_QSPI_MODULE_ENABLED
    249. 

  249. WEAK const PinMap PinMap_QUADSPI_SSEL[] = {
    250. 

  250.   {PA_2,  QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
    251. 

  251.   {PB_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
    252. 

  252.   {NC,    NP,    0}
    253. 

  253. };
    254. 

  254. #endif
    255. 

  255. 

  256. //*** USB ***
    257. 

  257. 

  258. #ifdef HAL_PCD_MODULE_ENABLED
    259. 

  259. WEAK const PinMap PinMap_USB[] = {
    260. 

  260.   {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DM
    261. 

  261.   {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DP
    262. 

  262.   //{PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB)}, // USB_NOE
    263. 

  263.   {NC,    NP,    0}
    264. 

  264. };
    265. 

  265. #endif
    266. 

  266. 

  267. //*** No USB_OTG_FS ***
    268. 

  268. 

  269. //*** No USB_OTG_HS ***
    270. 

  270. 

  271. //*** No SD ***
    272.