/matlab_tools/Converted/kkasc2map.m
Objective C | 207 lines | 204 code | 3 blank | 0 comment | 55 complexity | 905ab399c42733143d4afdc518de2906 MD5 | raw file
Possible License(s): BSD-3-Clause
- %kkasc2map 'Import ASCII Data File to Map Segment'
- % This MatLab function was automatically generated by a converter (KhorosToMatLab) from the Khoros kasc2map.pane file
- %
- % Parameters:
- % InputFile: i1 'ASCII Input File', required: 'ASCII input data file containing new data segment'
- % InputFile: i2 'Data Object Input', optional: 'data object input to insert the new segment into'
- % Integer: so 'Start Offset ', default: 0: 'starting point in ASCII file to start importing at'
- % Integer: sf 'Skip Factor ', default: 0: 'number of points in ASCII file to skip between reads'
- % Integer: wsize ' ', default: 1: 'map width size must be > 0'
- % Integer: hsize ' ', default: 1: 'map height size must be > 0'
- % Integer: dsize ' ', default: 1: 'map depth size must be > 0'
- % Integer: tsize ' ', default: 1: 'map time size must be > 0'
- % Integer: esize ' ', default: 1: 'map elements size must be > 0'
- % OutputFile: o 'Output Object', required: 'output data object'
- %
- % Example: o = kkasc2map({i1, i2}, {'i1','';'i2','';'so',0;'sf',0;'wsize',1;'hsize',1;'dsize',1;'tsize',1;'esize',1;'o',''})
- %
- % Khoros helpfile follows below:
- %
- % PROGRAM
- % kasc2map - Import ASCII Data File to Map Segment
- %
- % DESCRIPTION
- % This routine will import an ASCII data file and insert it into a data
- % object if it is specified. If there is no source object to insert the
- % new segment into, the data object specified as the output file will be
- % created. The new segment will be inserted into this data object in the
- % map segment. If a source object was specified, then all of its
- % data segments and the global object attributes will be copied to the
- % destination.
- % The index order is specified by setting the -windex, -hindex, -eindex,
- % -tindex and -dindex flags. They can not be set to the same value.
- % The start offset is the point to start importing in the
- % ASCII data. All points before this one are ignored.
- % The skip factor is the number of points to skip in the ASCII
- % data between reads. If the size of the new segment's lowest
- % index is 40 and the skip factor is 5, then this routine will
- % read in 40 points skip 5 and read in 40 more, etc. until the
- % entire ASCII file read in.
- % Complex values in ASCII are represented by number pairs, surrounded
- % by parenthesis and separated by a comma. For example, (8, 3) represents
- % the complex number 8+3i.
- %
- %
- %
- % EXAMPLES
- %
- % "SEE ALSO"
- % kasc2val, kasc2loc, kasc2time, kasc2mask, kimportasc
- %
- % RESTRICTIONS
- %
- % REFERENCES
- %
- % COPYRIGHT
- % Copyright (C) 1993 - 1997, Khoral Research, Inc. ("KRI") All rights reserved.
- %
- function varargout = kkasc2map(varargin)
- if nargin ==0
- Inputs={};arglist={'',''};
- elseif nargin ==1
- Inputs=varargin{1};arglist={'',''};
- elseif nargin ==2
- Inputs=varargin{1}; arglist=varargin{2};
- else error('Usage: [out1,..] = kkasc2map(Inputs,arglist).');
- end
- if size(arglist,2)~=2
- error('arglist must be of form {''ParameterTag1'',value1;''ParameterTag2'',value2}')
- end
- narglist={'i1', '__input';'i2', '__input';'so', 0;'sf', 0;'wsize', 1;'hsize', 1;'dsize', 1;'tsize', 1;'esize', 1;'o', '__output'};
- maxval={0,1,1,1,2,2,2,2,2,0};
- minval={0,1,1,1,2,2,2,2,2,0};
- istoggle=[0,1,1,1,1,1,1,1,1,0];
- was_set=istoggle * 0;
- paramtype={'InputFile','InputFile','Integer','Integer','Integer','Integer','Integer','Integer','Integer','OutputFile'};
- % identify the input arrays and assign them to the arguments as stated by the user
- if ~iscell(Inputs)
- Inputs = {Inputs};
- end
- NumReqOutputs=1; nextinput=1; nextoutput=1;
- for ii=1:size(arglist,1)
- wasmatched=0;
- for jj=1:size(narglist,1)
- if strcmp(arglist{ii,1},narglist{jj,1}) % a given argument was matched to the possible arguments
- wasmatched = 1;
- was_set(jj) = 1;
- if strcmp(narglist{jj,2}, '__input')
- if (nextinput > length(Inputs))
- error(['Input ' narglist{jj,1} ' has no corresponding input!']);
- end
- narglist{jj,2} = 'OK_in';
- nextinput = nextinput + 1;
- elseif strcmp(narglist{jj,2}, '__output')
- if (nextoutput > nargout)
- error(['Output nr. ' narglist{jj,1} ' is not present in the assignment list of outputs !']);
- end
- if (isempty(arglist{ii,2}))
- narglist{jj,2} = 'OK_out';
- else
- narglist{jj,2} = arglist{ii,2};
- end
- nextoutput = nextoutput + 1;
- if (minval{jj} == 0)
- NumReqOutputs = NumReqOutputs - 1;
- end
- elseif isstr(arglist{ii,2})
- narglist{jj,2} = arglist{ii,2};
- else
- if strcmp(paramtype{jj}, 'Integer') & (round(arglist{ii,2}) ~= arglist{ii,2})
- error(['Argument ' arglist{ii,1} ' is of integer type but non-integer number ' arglist{ii,2} ' was supplied']);
- end
- if (minval{jj} ~= 0 | maxval{jj} ~= 0)
- if (minval{jj} == 1 & maxval{jj} == 1 & arglist{ii,2} < 0)
- error(['Argument ' arglist{ii,1} ' must be bigger or equal to zero!']);
- elseif (minval{jj} == -1 & maxval{jj} == -1 & arglist{ii,2} > 0)
- error(['Argument ' arglist{ii,1} ' must be smaller or equal to zero!']);
- elseif (minval{jj} == 2 & maxval{jj} == 2 & arglist{ii,2} <= 0)
- error(['Argument ' arglist{ii,1} ' must be bigger than zero!']);
- elseif (minval{jj} == -2 & maxval{jj} == -2 & arglist{ii,2} >= 0)
- error(['Argument ' arglist{ii,1} ' must be smaller than zero!']);
- elseif (minval{jj} ~= maxval{jj} & arglist{ii,2} < minval{jj})
- error(['Argument ' arglist{ii,1} ' must be bigger than ' num2str(minval{jj})]);
- elseif (minval{jj} ~= maxval{jj} & arglist{ii,2} > maxval{jj})
- error(['Argument ' arglist{ii,1} ' must be smaller than ' num2str(maxval{jj})]);
- end
- end
- end
- if ~strcmp(narglist{jj,2},'OK_out') & ~strcmp(narglist{jj,2},'OK_in')
- narglist{jj,2} = arglist{ii,2};
- end
- end
- end
- if (wasmatched == 0 & ~strcmp(arglist{ii,1},''))
- error(['Argument ' arglist{ii,1} ' is not a valid argument for this function']);
- end
- end
- % match the remaining inputs/outputs to the unused arguments and test for missing required inputs
- for jj=1:size(narglist,1)
- if strcmp(paramtype{jj}, 'Toggle')
- if (narglist{jj,2} ==0)
- narglist{jj,1} = '';
- end;
- narglist{jj,2} = '';
- end;
- if ~strcmp(narglist{jj,2},'__input') && ~strcmp(narglist{jj,2},'__output') && istoggle(jj) && ~ was_set(jj)
- narglist{jj,1} = '';
- narglist{jj,2} = '';
- end;
- if strcmp(narglist{jj,2}, '__input')
- if (minval{jj} == 0) % meaning this input is required
- if (nextinput > size(Inputs))
- error(['Required input ' narglist{jj,1} ' has no corresponding input in the list!']);
- else
- narglist{jj,2} = 'OK_in';
- nextinput = nextinput + 1;
- end
- else % this is an optional input
- if (nextinput <= length(Inputs))
- narglist{jj,2} = 'OK_in';
- nextinput = nextinput + 1;
- else
- narglist{jj,1} = '';
- narglist{jj,2} = '';
- end;
- end;
- else
- if strcmp(narglist{jj,2}, '__output')
- if (minval{jj} == 0) % this is a required output
- if (nextoutput > nargout & nargout > 1)
- error(['Required output ' narglist{jj,1} ' is not stated in the assignment list!']);
- else
- narglist{jj,2} = 'OK_out';
- nextoutput = nextoutput + 1;
- NumReqOutputs = NumReqOutputs-1;
- end
- else % this is an optional output
- if (nargout - nextoutput >= NumReqOutputs)
- narglist{jj,2} = 'OK_out';
- nextoutput = nextoutput + 1;
- else
- narglist{jj,1} = '';
- narglist{jj,2} = '';
- end;
- end
- end
- end
- end
- if nargout
- varargout = cell(1,nargout);
- else
- varargout = cell(1,1);
- end
- global KhorosRoot
- if exist('KhorosRoot') && ~isempty(KhorosRoot)
- w=['"' KhorosRoot];
- else
- if ispc
- w='"C:\Program Files\dip\khorosBin\';
- else
- [s,w] = system('which cantata');
- w=['"' w(1:end-8)];
- end
- end
- [varargout{:}]=callKhoros([w 'kasc2map" '],Inputs,narglist);