/arch/powerpc/platforms/embedded6xx/Kconfig

  1config EMBEDDED6xx
  2	bool "Embedded 6xx/7xx/7xxx-based boards"
  3	depends on 6xx && BROKEN_ON_SMP
  4
  5config LINKSTATION
  6	bool "Linkstation / Kurobox(HG) from Buffalo"
  7	depends on EMBEDDED6xx
  8	select MPIC
  9	select FSL_SOC
 10	select PPC_UDBG_16550 if SERIAL_8250
 11	select DEFAULT_UIMAGE
 12	select MPC10X_OPENPIC
 13	select MPC10X_BRIDGE
 14	help
 15	  Select LINKSTATION if configuring for one of PPC- (MPC8241)
 16	  based NAS systems from Buffalo Technology. So far only
 17	  KuroboxHG has been tested. In the future classical Kurobox,
 18	  Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
 19	  Terastation systems should be supported too.
 20
 21config STORCENTER
 22	bool "IOMEGA StorCenter"
 23	depends on EMBEDDED6xx
 24	select MPIC
 25	select FSL_SOC
 26	select PPC_UDBG_16550 if SERIAL_8250
 27	select MPC10X_OPENPIC
 28	select MPC10X_BRIDGE
 29	help
 30	  Select STORCENTER if configuring for the iomega StorCenter
 31	  with an 8241 CPU in it.
 32
 33config MPC7448HPC2
 34	bool "Freescale MPC7448HPC2(Taiga)"
 35	depends on EMBEDDED6xx
 36	select TSI108_BRIDGE
 37	select DEFAULT_UIMAGE
 38	select PPC_UDBG_16550
 39	select TSI108_BRIDGE
 40	help
 41	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
 42	  platform
 43
 44config PPC_HOLLY
 45	bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
 46	depends on EMBEDDED6xx
 47	select TSI108_BRIDGE
 48	select PPC_UDBG_16550
 49	select TSI108_BRIDGE
 50	help
 51	  Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
 52	  Board with TSI108/9 bridge (Hickory/Holly)
 53
 54config PPC_PRPMC2800
 55	bool "Motorola-PrPMC2800"
 56	depends on EMBEDDED6xx
 57	select MV64X60
 58	select NOT_COHERENT_CACHE
 59	help
 60	  This option enables support for the Motorola PrPMC2800 board
 61
 62config PPC_C2K
 63	bool "SBS/GEFanuc C2K board"
 64	depends on EMBEDDED6xx
 65	select MV64X60
 66	select NOT_COHERENT_CACHE
 67	select MTD_CFI_I4
 68	help
 69	  This option enables support for the GE Fanuc C2K board (formerly
 70	  an SBS board).
 71
 72config TSI108_BRIDGE
 73	bool
 74	select PCI
 75	select MPIC
 76	select MPIC_WEIRD
 77
 78config MPC10X_BRIDGE
 79	bool
 80	select PPC_INDIRECT_PCI
 81
 82config MV64X60
 83	bool
 84	select PPC_INDIRECT_PCI
 85	select CHECK_CACHE_COHERENCY
 86
 87config MPC10X_OPENPIC
 88	bool
 89
 90config MPC10X_STORE_GATHERING
 91	bool "Enable MPC10x store gathering"
 92	depends on MPC10X_BRIDGE
 93
 94config GAMECUBE_COMMON
 95	bool
 96
 97config USBGECKO_UDBG
 98	bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
 99	depends on GAMECUBE_COMMON
100	help
101	  If you say yes to this option, support will be included for the
102	  USB Gecko adapter as an udbg console.
103	  The USB Gecko is a EXI to USB Serial converter that can be plugged
104	  into a memcard slot in the Nintendo GameCube/Wii.
105
106	  This driver bypasses the EXI layer completely.
107
108	  If in doubt, say N here.
109
110config GAMECUBE
111	bool "Nintendo-GameCube"
112	depends on EMBEDDED6xx
113	select GAMECUBE_COMMON
114	help
115	  Select GAMECUBE if configuring for the Nintendo GameCube.
116	  More information at: <http://gc-linux.sourceforge.net/>
117
118config WII
119	bool "Nintendo-Wii"
120	depends on EMBEDDED6xx
121	select GAMECUBE_COMMON
122	help
123	  Select WII if configuring for the Nintendo Wii.
124	  More information at: <http://gc-linux.sourceforge.net/>
125