PageRenderTime 21ms CodeModel.GetById 19ms app.highlight 1ms RepoModel.GetById 0ms app.codeStats 0ms

/drivers/net/wireless/hostap/hostap_config.h

https://bitbucket.org/cyanogenmod/android_kernel_asus_tf300t
C Header | 48 lines | 11 code | 11 blank | 26 comment | 1 complexity | a616564964d344981e75af44836bb2b1 MD5 | raw file
Possible License(s): LGPL-2.0, AGPL-1.0, GPL-2.0
 1#ifndef HOSTAP_CONFIG_H
 2#define HOSTAP_CONFIG_H
 3
 4/* In the previous versions of Host AP driver, support for user space version
 5 * of IEEE 802.11 management (hostapd) used to be disabled in the default
 6 * configuration. From now on, support for hostapd is always included and it is
 7 * possible to disable kernel driver version of IEEE 802.11 management with a
 8 * separate define, PRISM2_NO_KERNEL_IEEE80211_MGMT. */
 9/* #define PRISM2_NO_KERNEL_IEEE80211_MGMT */
10
11/* Maximum number of events handler per one interrupt */
12#define PRISM2_MAX_INTERRUPT_EVENTS 20
13
14/* Include code for downloading firmware images into volatile RAM. */
15#define PRISM2_DOWNLOAD_SUPPORT
16
17/* Allow kernel configuration to enable download support. */
18#if !defined(PRISM2_DOWNLOAD_SUPPORT) && defined(CONFIG_HOSTAP_FIRMWARE)
19#define PRISM2_DOWNLOAD_SUPPORT
20#endif
21
22/* Allow kernel configuration to enable non-volatile download support. */
23#ifdef CONFIG_HOSTAP_FIRMWARE_NVRAM
24#define PRISM2_NON_VOLATILE_DOWNLOAD
25#endif
26
27/* Save low-level I/O for debugging. This should not be enabled in normal use.
28 */
29/* #define PRISM2_IO_DEBUG */
30
31/* Following defines can be used to remove unneeded parts of the driver, e.g.,
32 * to limit the size of the kernel module. Definitions can be added here in
33 * hostap_config.h or they can be added to make command with ccflags-y,
34 * e.g.,
35 * 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"'
36 */
37
38/* Do not include debug messages into the driver */
39/* #define PRISM2_NO_DEBUG */
40
41/* Do not include /proc/net/prism2/wlan#/{registers,debug} */
42/* #define PRISM2_NO_PROCFS_DEBUG */
43
44/* Do not include station functionality (i.e., allow only Master (Host AP) mode
45 */
46/* #define PRISM2_NO_STATION_MODES */
47
48#endif /* HOSTAP_CONFIG_H */