/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_STM/TARGET_STM32F0/TARGET_NUCLEO_F030R8/PinNames.h
C Header | 188 lines | 136 code | 17 blank | 35 comment | 0 complexity | b54f8c7f63d96d6fe2818d376eae6547 MD5 | raw file
- /* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
- #ifndef MBED_PINNAMES_H
- #define MBED_PINNAMES_H
- #include "cmsis.h"
- #ifdef __cplusplus
- extern "C" {
- #endif
- // See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
- #define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
- #define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
- #define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
- #define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
- #define STM_MODE_INPUT (0)
- #define STM_MODE_OUTPUT_PP (1)
- #define STM_MODE_OUTPUT_OD (2)
- #define STM_MODE_AF_PP (3)
- #define STM_MODE_AF_OD (4)
- #define STM_MODE_ANALOG (5)
- #define STM_MODE_IT_RISING (6)
- #define STM_MODE_IT_FALLING (7)
- #define STM_MODE_IT_RISING_FALLING (8)
- #define STM_MODE_EVT_RISING (9)
- #define STM_MODE_EVT_FALLING (10)
- #define STM_MODE_EVT_RISING_FALLING (11)
- #define STM_MODE_IT_EVT_RESET (12)
- // High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
- // Low nibble = pin number
- #define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
- #define STM_PIN(X) ((uint32_t)(X) & 0xF)
- typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
- } PinDirection;
- typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
- PD_2 = 0x32,
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PC_7,
- // Not connected
- NC = (int)0xFFFFFFFF
- } PinName;
- typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
- } PinMode;
- #ifdef __cplusplus
- }
- #endif
- #endif