/share/examples/ses/srcs/eltsub.c

  1/* $FreeBSD$ */
  2/*
  3 * Copyright (c) 2000 by Matthew Jacob
  4 * All rights reserved.
  5 *
  6 * Redistribution and use in source and binary forms, with or without
  7 * modification, are permitted provided that the following conditions
  8 * are met:
  9 * 1. Redistributions of source code must retain the above copyright
 10 *    notice, this list of conditions, and the following disclaimer,
 11 *    without modification, immediately at the beginning of the file.
 12 * 2. The name of the author may not be used to endorse or promote products
 13 *    derived from this software without specific prior written permission.
 14 *
 15 * Alternatively, this software may be distributed under the terms of the
 16 * the GNU Public License ("GPL").
 17 *
 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 28 * SUCH DAMAGE.
 29 * 
 30 * Matthew Jacob
 31 * Feral Software
 32 * mjacob@feral.com
 33 */
 34
 35#include <unistd.h>
 36#include <stddef.h>
 37#include <stdint.h>
 38#include <stdlib.h>
 39#include <stdio.h>
 40#include <sys/ioctl.h>
 41#include <cam/scsi/scsi_all.h>
 42#include <cam/scsi/scsi_enc.h>
 43
 44#include "eltsub.h"
 45
 46char *
 47geteltnm(int type)
 48{
 49	static char rbuf[132];
 50
 51	switch (type) {
 52	case ELMTYP_UNSPECIFIED:
 53		sprintf(rbuf, "Unspecified");
 54		break;
 55	case ELMTYP_DEVICE:
 56		sprintf(rbuf, "Device Slot");
 57		break;
 58	case ELMTYP_POWER:
 59		sprintf(rbuf, "Power Supply");
 60		break;
 61	case ELMTYP_FAN:
 62		sprintf(rbuf, "Cooling");
 63		break;
 64	case ELMTYP_THERM:
 65		sprintf(rbuf, "Temperature Sensors");
 66		break;
 67	case ELMTYP_DOORLOCK:
 68		sprintf(rbuf, "Door Lock");
 69		break;
 70	case ELMTYP_ALARM:
 71		sprintf(rbuf, "Audible alarm");
 72		break;
 73	case ELMTYP_ESCC:
 74		sprintf(rbuf, "Enclosure Eervices Controller Electronics");
 75		break;
 76	case ELMTYP_SCC:
 77		sprintf(rbuf, "SCC Controller Electronics");
 78		break;
 79	case ELMTYP_NVRAM:
 80		sprintf(rbuf, "Nonvolatile Cache");
 81		break;
 82	case ELMTYP_INV_OP_REASON:
 83		sprintf(rbuf, "Invalid Operation Reason");
 84		break;
 85	case ELMTYP_UPS:
 86		sprintf(rbuf, "Uninterruptible Power Supply");
 87		break;
 88	case ELMTYP_DISPLAY:
 89		sprintf(rbuf, "Display");
 90		break;
 91	case ELMTYP_KEYPAD:
 92		sprintf(rbuf, "Key Pad Entry");
 93		break;
 94	case ELMTYP_ENCLOSURE:
 95		sprintf(rbuf, "Enclosure");
 96		break;
 97	case ELMTYP_SCSIXVR:
 98		sprintf(rbuf, "SCSI Port/Transceiver");
 99		break;
100	case ELMTYP_LANGUAGE:
101		sprintf(rbuf, "Language");
102		break;
103	case ELMTYP_COMPORT:
104		sprintf(rbuf, "Communication Port");
105		break;
106	case ELMTYP_VOM:
107		sprintf(rbuf, "Voltage Sensor");
108		break;
109	case ELMTYP_AMMETER:
110		sprintf(rbuf, "Current Sensor");
111		break;
112	case ELMTYP_SCSI_TGT:
113		sprintf(rbuf, "SCSI Target Port");
114		break;
115	case ELMTYP_SCSI_INI:
116		sprintf(rbuf, "SCSI Initiator Port");
117		break;
118	case ELMTYP_SUBENC:
119		sprintf(rbuf, "Simple Subenclosure");
120		break;
121	case ELMTYP_ARRAY_DEV:
122		sprintf(rbuf, "Array Device Slot");
123		break;
124	case ELMTYP_SAS_EXP:
125		sprintf(rbuf, "SAS Expander");
126		break;
127	case ELMTYP_SAS_CONN:
128		sprintf(rbuf, "SAS Connector");
129		break;
130	default:
131		(void) sprintf(rbuf, "<Type 0x%x>", type);
132		break;
133	}
134	return (rbuf);
135}
136
137static char *
138scode2ascii(u_char code)
139{
140	static char rbuf[32];
141	switch (code & 0xf) {
142	case SES_OBJSTAT_UNSUPPORTED:
143		sprintf(rbuf, "Unsupported");
144		break;
145	case SES_OBJSTAT_OK:
146		sprintf(rbuf, "OK");
147		break;
148	case SES_OBJSTAT_CRIT:
149		sprintf(rbuf, "Critical");
150		break;
151	case SES_OBJSTAT_NONCRIT:
152		sprintf(rbuf, "Noncritical");
153		break;
154	case SES_OBJSTAT_UNRECOV:
155		sprintf(rbuf, "Unrecoverable");
156		break;
157	case SES_OBJSTAT_NOTINSTALLED:
158		sprintf(rbuf, "Not Installed");
159		break;
160	case SES_OBJSTAT_UNKNOWN:
161		sprintf(rbuf, "Unknown");
162		break;
163	case SES_OBJSTAT_NOTAVAIL:
164		sprintf(rbuf, "Not Available");
165		break;
166	case SES_OBJSTAT_NOACCESS:
167		sprintf(rbuf, "No Access Allowed");
168		break;
169	default:
170		sprintf(rbuf, "<Status 0x%x>", code & 0xf);
171		break;
172	}
173	return (rbuf);
174}
175
176
177char *
178stat2ascii(int eletype __unused, u_char *cstat)
179{
180	static char ebuf[256], *scode;
181
182	scode = scode2ascii(cstat[0]);
183	sprintf(ebuf, "status: %s (0x%02x 0x%02x 0x%02x 0x%02x)",
184	    scode, cstat[0], cstat[1], cstat[2], cstat[3]);
185	return (ebuf);
186}