PageRenderTime 26ms CodeModel.GetById 12ms app.highlight 11ms RepoModel.GetById 0ms app.codeStats 0ms

/drivers/ata/pata_ns87415.c

https://bitbucket.org/ndreys/linux-sunxi
C | 437 lines | 222 code | 62 blank | 153 comment | 13 complexity | b9ab4e4eb8f7db870e1c319a4cbbd1e6 MD5 | raw file
Possible License(s): GPL-2.0, LGPL-2.0, AGPL-1.0
  1/*
  2 *    pata_ns87415.c - NS87415 (non PARISC) PATA
  3 *
  4 *	(C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk>
  5 *
  6 *    This is a fairly generic MWDMA controller. It has some limitations
  7 *    as it requires timing reloads on PIO/DMA transitions but it is otherwise
  8 *    fairly well designed.
  9 *
 10 *    This driver assumes the firmware has left the chip in a valid ST506
 11 *    compliant state, either legacy IRQ 14/15 or native INTA shared. You
 12 *    may need to add platform code if your system fails to do this.
 13 *
 14 *    The same cell appears in the 87560 controller used by some PARISC
 15 *    systems. This has its own special mountain of errata.
 16 *
 17 *    TODO:
 18 *	Test PARISC SuperIO
 19 *	Get someone to test on SPARC
 20 *	Implement lazy pio/dma switching for better performance
 21 *	8bit shared timing.
 22 *	See if we need to kill the FIFO for ATAPI
 23 */
 24
 25#include <linux/kernel.h>
 26#include <linux/module.h>
 27#include <linux/pci.h>
 28#include <linux/init.h>
 29#include <linux/blkdev.h>
 30#include <linux/delay.h>
 31#include <linux/device.h>
 32#include <scsi/scsi_host.h>
 33#include <linux/libata.h>
 34#include <linux/ata.h>
 35
 36#define DRV_NAME	"pata_ns87415"
 37#define DRV_VERSION	"0.0.1"
 38
 39/**
 40 *	ns87415_set_mode - Initialize host controller mode timings
 41 *	@ap: Port whose timings we are configuring
 42 *	@adev: Device whose timings we are configuring
 43 *	@mode: Mode to set
 44 *
 45 *	Program the mode registers for this controller, channel and
 46 *	device. Because the chip is quite an old design we have to do this
 47 *	for PIO/DMA switches.
 48 *
 49 *	LOCKING:
 50 *	None (inherited from caller).
 51 */
 52
 53static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode)
 54{
 55	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
 56	int unit		= 2 * ap->port_no + adev->devno;
 57	int timing		= 0x44 + 2 * unit;
 58	unsigned long T		= 1000000000 / 33333;	/* PCI clocks */
 59	struct ata_timing t;
 60	u16 clocking;
 61	u8 iordy;
 62	u8 status;
 63
 64	/* Timing register format is 17 - low nybble read timing with
 65	   the high nybble being 16 - x for recovery time in PCI clocks */
 66
 67	ata_timing_compute(adev, adev->pio_mode, &t, T, 0);
 68
 69	clocking = 17 - clamp_val(t.active, 2, 17);
 70	clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4;
 71 	/* Use the same timing for read and write bytes */
 72	clocking |= (clocking << 8);
 73	pci_write_config_word(dev, timing, clocking);
 74
 75	/* Set the IORDY enable versus DMA enable on or off properly */
 76	pci_read_config_byte(dev, 0x42, &iordy);
 77	iordy &= ~(1 << (4 + unit));
 78	if (mode >= XFER_MW_DMA_0 || !ata_pio_need_iordy(adev))
 79		iordy |= (1 << (4 + unit));
 80
 81	/* Paranoia: We shouldn't ever get here with busy write buffers
 82	   but if so wait */
 83
 84	pci_read_config_byte(dev, 0x43, &status);
 85	while (status & 0x03) {
 86		udelay(1);
 87		pci_read_config_byte(dev, 0x43, &status);
 88	}
 89	/* Flip the IORDY/DMA bits now we are sure the write buffers are
 90	   clear */
 91	pci_write_config_byte(dev, 0x42, iordy);
 92
 93	/* TODO: Set byte 54 command timing to the best 8bit
 94	   mode shared by all four devices */
 95}
 96
 97/**
 98 *	ns87415_set_piomode - Initialize host controller PATA PIO timings
 99 *	@ap: Port whose timings we are configuring
100 *	@adev: Device to program
101 *
102 *	Set PIO mode for device, in host controller PCI config space.
103 *
104 *	LOCKING:
105 *	None (inherited from caller).
106 */
107
108static void ns87415_set_piomode(struct ata_port *ap, struct ata_device *adev)
109{
110	ns87415_set_mode(ap, adev, adev->pio_mode);
111}
112
113/**
114 *	ns87415_bmdma_setup		-	Set up DMA
115 *	@qc: Command block
116 *
117 *	Set up for bus masterng DMA. We have to do this ourselves
118 *	rather than use the helper due to a chip erratum
119 */
120
121static void ns87415_bmdma_setup(struct ata_queued_cmd *qc)
122{
123	struct ata_port *ap = qc->ap;
124	unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
125	u8 dmactl;
126
127	/* load PRD table addr. */
128	mb();	/* make sure PRD table writes are visible to controller */
129	iowrite32(ap->bmdma_prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
130
131	/* specify data direction, triple-check start bit is clear */
132	dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
133	dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
134	/* Due to an erratum we need to write these bits to the wrong
135	   place - which does save us an I/O bizarrely */
136	dmactl |= ATA_DMA_INTR | ATA_DMA_ERR;
137	if (!rw)
138		dmactl |= ATA_DMA_WR;
139	iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
140	/* issue r/w command */
141	ap->ops->sff_exec_command(ap, &qc->tf);
142}
143
144/**
145 *	ns87415_bmdma_start		-	Begin DMA transfer
146 *	@qc: Command block
147 *
148 *	Switch the timings for the chip and set up for a DMA transfer
149 *	before the DMA burst begins.
150 *
151 *	FIXME: We should do lazy switching on bmdma_start versus
152 *	ata_pio_data_xfer for better performance.
153 */
154
155static void ns87415_bmdma_start(struct ata_queued_cmd *qc)
156{
157	ns87415_set_mode(qc->ap, qc->dev, qc->dev->dma_mode);
158	ata_bmdma_start(qc);
159}
160
161/**
162 *	ns87415_bmdma_stop		-	End DMA transfer
163 *	@qc: Command block
164 *
165 *	End DMA mode and switch the controller back into PIO mode
166 */
167
168static void ns87415_bmdma_stop(struct ata_queued_cmd *qc)
169{
170	ata_bmdma_stop(qc);
171	ns87415_set_mode(qc->ap, qc->dev, qc->dev->pio_mode);
172}
173
174/**
175 *	ns87415_irq_clear		-	Clear interrupt
176 *	@ap: Channel to clear
177 *
178 *	Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the
179 *	error bits) are reset by writing to register 00 or 08.
180 */
181
182static void ns87415_irq_clear(struct ata_port *ap)
183{
184	void __iomem *mmio = ap->ioaddr.bmdma_addr;
185
186	if (!mmio)
187		return;
188	iowrite8((ioread8(mmio + ATA_DMA_CMD) | ATA_DMA_INTR | ATA_DMA_ERR),
189			mmio + ATA_DMA_CMD);
190}
191
192/**
193 *	ns87415_check_atapi_dma		-	ATAPI DMA filter
194 *	@qc: Command block
195 *
196 *	Disable ATAPI DMA (for now). We may be able to do DMA if we
197 *	kill the prefetching. This isn't clear.
198 */
199
200static int ns87415_check_atapi_dma(struct ata_queued_cmd *qc)
201{
202	return -EOPNOTSUPP;
203}
204
205#if defined(CONFIG_SUPERIO)
206
207/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
208 * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
209 * which use the integrated NS87514 cell for CD-ROM support.
210 * i.e we have to support for CD-ROM installs.
211 * See drivers/parisc/superio.c for more gory details.
212 *
213 * Workarounds taken from drivers/ide/pci/ns87415.c
214 */
215
216#include <asm/superio.h>
217
218#define SUPERIO_IDE_MAX_RETRIES 25
219
220/**
221 *	ns87560_read_buggy	-	workaround buggy Super I/O chip
222 *	@port: Port to read
223 *
224 *	Work around chipset problems in the 87560 SuperIO chip
225 */
226
227static u8 ns87560_read_buggy(void __iomem *port)
228{
229	u8 tmp;
230	int retries = SUPERIO_IDE_MAX_RETRIES;
231	do {
232		tmp = ioread8(port);
233		if (tmp != 0)
234			return tmp;
235		udelay(50);
236	} while(retries-- > 0);
237	return tmp;
238}
239
240/**
241 *	ns87560_check_status
242 *	@ap: channel to check
243 *
244 *	Return the status of the channel working around the
245 *	87560 flaws.
246 */
247
248static u8 ns87560_check_status(struct ata_port *ap)
249{
250	return ns87560_read_buggy(ap->ioaddr.status_addr);
251}
252
253/**
254 *	ns87560_tf_read - input device's ATA taskfile shadow registers
255 *	@ap: Port from which input is read
256 *	@tf: ATA taskfile register set for storing input
257 *
258 *	Reads ATA taskfile registers for currently-selected device
259 *	into @tf. Work around the 87560 bugs.
260 *
261 *	LOCKING:
262 *	Inherited from caller.
263 */
264void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
265{
266	struct ata_ioports *ioaddr = &ap->ioaddr;
267
268	tf->command = ns87560_check_status(ap);
269	tf->feature = ioread8(ioaddr->error_addr);
270	tf->nsect = ioread8(ioaddr->nsect_addr);
271	tf->lbal = ioread8(ioaddr->lbal_addr);
272	tf->lbam = ioread8(ioaddr->lbam_addr);
273	tf->lbah = ioread8(ioaddr->lbah_addr);
274	tf->device = ns87560_read_buggy(ioaddr->device_addr);
275
276	if (tf->flags & ATA_TFLAG_LBA48) {
277		iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
278		tf->hob_feature = ioread8(ioaddr->error_addr);
279		tf->hob_nsect = ioread8(ioaddr->nsect_addr);
280		tf->hob_lbal = ioread8(ioaddr->lbal_addr);
281		tf->hob_lbam = ioread8(ioaddr->lbam_addr);
282		tf->hob_lbah = ioread8(ioaddr->lbah_addr);
283		iowrite8(tf->ctl, ioaddr->ctl_addr);
284		ap->last_ctl = tf->ctl;
285	}
286}
287
288/**
289 *	ns87560_bmdma_status
290 *	@ap: channel to check
291 *
292 *	Return the DMA status of the channel working around the
293 *	87560 flaws.
294 */
295
296static u8 ns87560_bmdma_status(struct ata_port *ap)
297{
298	return ns87560_read_buggy(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
299}
300#endif		/* 87560 SuperIO Support */
301
302static struct ata_port_operations ns87415_pata_ops = {
303	.inherits		= &ata_bmdma_port_ops,
304
305	.check_atapi_dma	= ns87415_check_atapi_dma,
306	.bmdma_setup		= ns87415_bmdma_setup,
307	.bmdma_start		= ns87415_bmdma_start,
308	.bmdma_stop		= ns87415_bmdma_stop,
309	.sff_irq_clear		= ns87415_irq_clear,
310
311	.cable_detect		= ata_cable_40wire,
312	.set_piomode		= ns87415_set_piomode,
313};
314
315#if defined(CONFIG_SUPERIO)
316static struct ata_port_operations ns87560_pata_ops = {
317	.inherits		= &ns87415_pata_ops,
318	.sff_tf_read		= ns87560_tf_read,
319	.sff_check_status	= ns87560_check_status,
320	.bmdma_status		= ns87560_bmdma_status,
321};
322#endif
323
324static struct scsi_host_template ns87415_sht = {
325	ATA_BMDMA_SHT(DRV_NAME),
326};
327
328static void ns87415_fixup(struct pci_dev *pdev)
329{
330	/* Select 512 byte sectors */
331	pci_write_config_byte(pdev, 0x55, 0xEE);
332	/* Select PIO0 8bit clocking */
333	pci_write_config_byte(pdev, 0x54, 0xB7);
334}
335
336/**
337 *	ns87415_init_one - Register 87415 ATA PCI device with kernel services
338 *	@pdev: PCI device to register
339 *	@ent: Entry in ns87415_pci_tbl matching with @pdev
340 *
341 *	Called from kernel PCI layer.  We probe for combined mode (sigh),
342 *	and then hand over control to libata, for it to do the rest.
343 *
344 *	LOCKING:
345 *	Inherited from PCI layer (may sleep).
346 *
347 *	RETURNS:
348 *	Zero on success, or -ERRNO value.
349 */
350
351static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
352{
353	static int printed_version;
354	static const struct ata_port_info info = {
355		.flags		= ATA_FLAG_SLAVE_POSS,
356		.pio_mask	= ATA_PIO4,
357		.mwdma_mask	= ATA_MWDMA2,
358		.port_ops	= &ns87415_pata_ops,
359	};
360	const struct ata_port_info *ppi[] = { &info, NULL };
361	int rc;
362#if defined(CONFIG_SUPERIO)
363	static const struct ata_port_info info87560 = {
364		.flags		= ATA_FLAG_SLAVE_POSS,
365		.pio_mask	= ATA_PIO4,
366		.mwdma_mask	= ATA_MWDMA2,
367		.port_ops	= &ns87560_pata_ops,
368	};
369
370	if (PCI_SLOT(pdev->devfn) == 0x0E)
371		ppi[0] = &info87560;
372#endif
373	if (!printed_version++)
374		dev_printk(KERN_DEBUG, &pdev->dev,
375			   "version " DRV_VERSION "\n");
376
377	rc = pcim_enable_device(pdev);
378	if (rc)
379		return rc;
380
381	ns87415_fixup(pdev);
382
383	return ata_pci_bmdma_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
384}
385
386static const struct pci_device_id ns87415_pci_tbl[] = {
387	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), },
388
389	{ }	/* terminate list */
390};
391
392#ifdef CONFIG_PM
393static int ns87415_reinit_one(struct pci_dev *pdev)
394{
395	struct ata_host *host = dev_get_drvdata(&pdev->dev);
396	int rc;
397
398	rc = ata_pci_device_do_resume(pdev);
399	if (rc)
400		return rc;
401
402	ns87415_fixup(pdev);
403
404	ata_host_resume(host);
405	return 0;
406}
407#endif
408
409static struct pci_driver ns87415_pci_driver = {
410	.name			= DRV_NAME,
411	.id_table		= ns87415_pci_tbl,
412	.probe			= ns87415_init_one,
413	.remove			= ata_pci_remove_one,
414#ifdef CONFIG_PM
415	.suspend		= ata_pci_device_suspend,
416	.resume			= ns87415_reinit_one,
417#endif
418};
419
420static int __init ns87415_init(void)
421{
422	return pci_register_driver(&ns87415_pci_driver);
423}
424
425static void __exit ns87415_exit(void)
426{
427	pci_unregister_driver(&ns87415_pci_driver);
428}
429
430module_init(ns87415_init);
431module_exit(ns87415_exit);
432
433MODULE_AUTHOR("Alan Cox");
434MODULE_DESCRIPTION("ATA low-level driver for NS87415 controllers");
435MODULE_LICENSE("GPL");
436MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
437MODULE_VERSION(DRV_VERSION);