/hw/ide/ich.c
https://bitbucket.org/yclin127/qemu-tracer · C · 171 lines · 84 code · 25 blank · 62 comment · 1 complexity · f95ffd318847269763e43da5357d86e7 MD5 · raw file
- /*
- * QEMU ICH Emulation
- *
- * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
- * Copyright (c) 2010 Alexander Graf <agraf@suse.de>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see <http://www.gnu.org/licenses/>.
- *
- *
- * lspci dump of a ICH-9 real device
- *
- * 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
- * Subsystem: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922]
- * Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- * Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- * Latency: 0
- * Interrupt: pin B routed to IRQ 222
- * Region 0: I/O ports at d000 [size=8]
- * Region 1: I/O ports at cc00 [size=4]
- * Region 2: I/O ports at c880 [size=8]
- * Region 3: I/O ports at c800 [size=4]
- * Region 4: I/O ports at c480 [size=32]
- * Region 5: Memory at febf9000 (32-bit, non-prefetchable) [size=2K]
- * Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+
- * Address: fee0f00c Data: 41d9
- * Capabilities: [70] Power Management version 3
- * Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- * Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- * Capabilities: [a8] SATA HBA <?>
- * Capabilities: [b0] Vendor Specific Information <?>
- * Kernel driver in use: ahci
- * Kernel modules: ahci
- * 00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00
- * 10: 01 d0 00 00 01 cc 00 00 81 c8 00 00 01 c8 00 00
- * 20: 81 c4 00 00 00 90 bf fe 00 00 00 00 86 80 22 29
- * 30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00
- * 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00
- * 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
- * 80: 05 70 09 00 0c f0 e0 fe d9 41 00 00 00 00 00 00
- * 90: 40 00 0f 82 93 01 00 00 00 00 00 00 00 00 00 00
- * a0: ac 00 00 00 0a 00 12 00 12 b0 10 00 48 00 00 00
- * b0: 09 00 06 20 00 00 00 00 00 00 00 00 00 00 00 00
- * c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
- *
- */
- #include <hw/hw.h>
- #include <hw/msi.h>
- #include <hw/pc.h>
- #include <hw/pci.h>
- #include <hw/isa.h>
- #include "block.h"
- #include "dma.h"
- #include <hw/ide/pci.h>
- #include <hw/ide/ahci.h>
- #define ICH9_SATA_CAP_OFFSET 0xA8
- #define ICH9_IDP_BAR 4
- #define ICH9_MEM_BAR 5
- #define ICH9_IDP_INDEX 0x10
- #define ICH9_IDP_INDEX_LOG2 0x04
- static const VMStateDescription vmstate_ahci = {
- .name = "ahci",
- .unmigratable = 1,
- };
- static void pci_ich9_reset(DeviceState *dev)
- {
- struct AHCIPCIState *d = DO_UPCAST(struct AHCIPCIState, card.qdev, dev);
- ahci_reset(&d->ahci);
- }
- static int pci_ich9_ahci_init(PCIDevice *dev)
- {
- struct AHCIPCIState *d;
- int sata_cap_offset;
- uint8_t *sata_cap;
- d = DO_UPCAST(struct AHCIPCIState, card, dev);
- ahci_init(&d->ahci, &dev->qdev, pci_dma_context(dev), 6);
- pci_config_set_prog_interface(d->card.config, AHCI_PROGMODE_MAJOR_REV_1);
- d->card.config[PCI_CACHE_LINE_SIZE] = 0x08; /* Cache line size */
- d->card.config[PCI_LATENCY_TIMER] = 0x00; /* Latency timer */
- pci_config_set_interrupt_pin(d->card.config, 1);
- /* XXX Software should program this register */
- d->card.config[0x90] = 1 << 6; /* Address Map Register - AHCI mode */
- msi_init(dev, 0x50, 1, true, false);
- d->ahci.irq = d->card.irq[0];
- pci_register_bar(&d->card, ICH9_IDP_BAR, PCI_BASE_ADDRESS_SPACE_IO,
- &d->ahci.idp);
- pci_register_bar(&d->card, ICH9_MEM_BAR, PCI_BASE_ADDRESS_SPACE_MEMORY,
- &d->ahci.mem);
- sata_cap_offset = pci_add_capability(&d->card, PCI_CAP_ID_SATA,
- ICH9_SATA_CAP_OFFSET, SATA_CAP_SIZE);
- if (sata_cap_offset < 0) {
- return sata_cap_offset;
- }
- sata_cap = d->card.config + sata_cap_offset;
- pci_set_word(sata_cap + SATA_CAP_REV, 0x10);
- pci_set_long(sata_cap + SATA_CAP_BAR,
- (ICH9_IDP_BAR + 0x4) | (ICH9_IDP_INDEX_LOG2 << 4));
- d->ahci.idp_offset = ICH9_IDP_INDEX;
- return 0;
- }
- static void pci_ich9_uninit(PCIDevice *dev)
- {
- struct AHCIPCIState *d;
- d = DO_UPCAST(struct AHCIPCIState, card, dev);
- msi_uninit(dev);
- ahci_uninit(&d->ahci);
- }
- static void ich_ahci_class_init(ObjectClass *klass, void *data)
- {
- DeviceClass *dc = DEVICE_CLASS(klass);
- PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
- k->init = pci_ich9_ahci_init;
- k->exit = pci_ich9_uninit;
- k->vendor_id = PCI_VENDOR_ID_INTEL;
- k->device_id = PCI_DEVICE_ID_INTEL_82801IR;
- k->revision = 0x02;
- k->class_id = PCI_CLASS_STORAGE_SATA;
- dc->vmsd = &vmstate_ahci;
- dc->reset = pci_ich9_reset;
- }
- static TypeInfo ich_ahci_info = {
- .name = "ich9-ahci",
- .parent = TYPE_PCI_DEVICE,
- .instance_size = sizeof(AHCIPCIState),
- .class_init = ich_ahci_class_init,
- };
- static void ich_ahci_register_types(void)
- {
- type_register_static(&ich_ahci_info);
- }
- type_init(ich_ahci_register_types)