PageRenderTime 4ms CodeModel.GetById 1ms app.highlight 1ms RepoModel.GetById 1ms app.codeStats 0ms

/drivers/firmware/Kconfig

https://bitbucket.org/evzijst/gittest
#! | 61 lines | 49 code | 12 blank | 0 comment | 0 complexity | 99707b58117dde20ac698978301ed2a3 MD5 | raw file
 1#
 2# For a description of the syntax of this configuration file,
 3# see Documentation/kbuild/kconfig-language.txt.
 4#
 5
 6menu "Firmware Drivers"
 7
 8config EDD
 9	tristate "BIOS Enhanced Disk Drive calls determine boot disk (EXPERIMENTAL)"
10	depends on EXPERIMENTAL
11	depends on !IA64
12	help
13	  Say Y or M here if you want to enable BIOS Enhanced Disk Drive
14	  Services real mode BIOS calls to determine which disk
15	  BIOS tries boot from.  This information is then exported via sysfs.
16
17	  This option is experimental and is known to fail to boot on some
18          obscure configurations. Most disk controller BIOS vendors do
19          not yet implement this feature.
20
21config EFI_VARS
22	tristate "EFI Variable Support via sysfs"
23	depends on EFI
24	default n
25	help
26	  If you say Y here, you are able to get EFI (Extensible Firmware
27	  Interface) variable information via sysfs.  You may read,
28	  write, create, and destroy EFI variables through this interface.
29
30	  Note that using this driver in concert with efibootmgr requires
31	  at least test release version 0.5.0-test3 or later, which is
32	  available from Matt Domsch's website located at:
33	  <http://linux.dell.com/efibootmgr/testing/efibootmgr-0.5.0-test3.tar.gz>
34
35	  Subsequent efibootmgr releases may be found at:
36	  <http://linux.dell.com/efibootmgr>
37
38config EFI_PCDP
39	bool "Console device selection via EFI PCDP or HCDP table"
40	depends on ACPI && EFI && IA64
41	default y if IA64
42	help
43	  If your firmware supplies the PCDP table, and you want to
44	  automatically use the primary console device it describes
45	  as the Linux console, say Y here.
46
47	  If your firmware supplies the HCDP table, and you want to
48	  use the first serial port it describes as the Linux console,
49	  say Y here.  If your EFI ConOut path contains only a UART
50	  device, it will become the console automatically.  Otherwise,
51	  you must specify the "console=hcdp" kernel boot argument.
52
53	  Neither the PCDP nor the HCDP affects naming of serial devices,
54	  so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
55	  on how the driver discovers devices.
56
57	  You must also enable the appropriate drivers (serial, VGA, etc.)
58
59	  See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
60
61endmenu