PageRenderTime 18ms CodeModel.GetById 12ms app.highlight 1ms RepoModel.GetById 2ms app.codeStats 0ms

#! | 23 lines | 16 code | 7 blank | 0 comment | 0 complexity | 000206354a5fc911307eabb9bda2dc79 MD5 | raw file
 1To configure the Crystal CS423x sound chip and activate its DSP functions,
 2modules may be loaded in this order:
 4	modprobe sound
 5	insmod ad1848
 6	insmod uart401
 7	insmod cs4232 io=* irq=* dma=* dma2=*
 9This is the meaning of the parameters:
11	io--I/O address of the Windows Sound System (normally 0x534)
12	irq--IRQ of this device
13	dma and dma2--DMA channels (DMA2 may be 0)
15On some cards, the board attempts to do non-PnP setup, and fails.  If you
16have problems, use Linux' PnP facilities. 
18To get MIDI facilities add
20	insmod opl3 io=*
22where "io" is the I/O address of the OPL3 synthesizer. This will be shown
23in /proc/sys/pnp and is normally 0x388.