/mbed_hufan/hal/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F407VG/PinNames.h
C Header | 261 lines | 208 code | 19 blank | 34 comment | 0 complexity | 05dea2dadf2d265cac667d1ff476ddea MD5 | raw file
- /* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
- #ifndef MBED_PINNAMES_H
- #define MBED_PINNAMES_H
- #include "cmsis.h"
- #ifdef __cplusplus
- extern "C" {
- #endif
- // See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
- #define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
- #define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
- #define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
- #define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
- #define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
- #define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
- #define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
- #define STM_MODE_INPUT (0)
- #define STM_MODE_OUTPUT_PP (1)
- #define STM_MODE_OUTPUT_OD (2)
- #define STM_MODE_AF_PP (3)
- #define STM_MODE_AF_OD (4)
- #define STM_MODE_ANALOG (5)
- #define STM_MODE_IT_RISING (6)
- #define STM_MODE_IT_FALLING (7)
- #define STM_MODE_IT_RISING_FALLING (8)
- #define STM_MODE_EVT_RISING (9)
- #define STM_MODE_EVT_FALLING (10)
- #define STM_MODE_EVT_RISING_FALLING (11)
- #define STM_MODE_IT_EVT_RESET (12)
- // High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
- // Low nibble = pin number
- #define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
- #define STM_PIN(X) ((uint32_t)(X) & 0xF)
- typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
- } PinDirection;
- typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
- // Generic signals namings
- LED1 = PD_13,
- LED2 = PD_12,
- LED3 = PD_13,
- LED4 = PD_12,
- LED5 = PD_14,
- LED6 = PD_15,
- USER_BUTTON = PA_0,
- SERIAL_TX = PA_2, /* USART2 */
- SERIAL_RX = PA_3,
- USBTX = PA_2, /* USART2 */
- USBRX = PA_3,
- I2C_SCL = PB_8, /* I2C1 */
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
- // Not connected
- NC = (int)0xFFFFFFFF
- } PinName;
- typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
- } PinMode;
- #ifdef __cplusplus
- }
- #endif
- #endif