PageRenderTime 59ms CodeModel.GetById 29ms RepoModel.GetById 1ms app.codeStats 0ms

/test/rails_app/config/initializers/devise.rb

https://github.com/bwalding/devise
Ruby | 191 lines | 15 code | 38 blank | 138 comment | 0 complexity | 2921dc42fa6ad32bd4aebd70e14c4fec MD5 | raw file
  1. # Use this hook to configure devise mailer, warden hooks and so forth. The first
  2. # four configuration values can also be set straight in your models.
  3. Devise.setup do |config|
  4. # ==> Mailer Configuration
  5. # Configure the e-mail address which will be shown in Devise::Mailer,
  6. # note that it will be overwritten if you use your own mailer class with default "from" parameter.
  7. config.mailer_sender = "please-change-me@config-initializers-devise.com"
  8. # Configure the class responsible to send e-mails.
  9. # config.mailer = "Devise::Mailer"
  10. # ==> ORM configuration
  11. # Load and configure the ORM. Supports :active_record (default) and
  12. # :mongoid (bson_ext recommended) by default. Other ORMs may be
  13. # available as additional gems.
  14. require "devise/orm/#{DEVISE_ORM}"
  15. # ==> Configuration for any authentication mechanism
  16. # Configure which keys are used when authenticating a user. By default is
  17. # just :email. You can configure it to use [:username, :subdomain], so for
  18. # authenticating a user, both parameters are required. Remember that those
  19. # parameters are used only when authenticating and not when retrieving from
  20. # session. If you need permissions, you should implement that in a before filter.
  21. # You can also supply hash where the value is a boolean expliciting if authentication
  22. # should be aborted or not if the value is not present. By default is empty.
  23. # config.authentication_keys = [ :email ]
  24. # Configure parameters from the request object used for authentication. Each entry
  25. # given should be a request method and it will automatically be passed to
  26. # find_for_authentication method and considered in your model lookup. For instance,
  27. # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
  28. # The same considerations mentioned for authentication_keys also apply to request_keys.
  29. # config.request_keys = []
  30. # Configure which authentication keys should be case-insensitive.
  31. # These keys will be downcased upon creating or modifying a user and when used
  32. # to authenticate or find a user. Default is :email.
  33. config.case_insensitive_keys = [ :email ]
  34. # Configure which authentication keys should have whitespace stripped.
  35. # These keys will have whitespace before and after removed upon creating or
  36. # modifying a user and when used to authenticate or find a user. Default is :email.
  37. config.strip_whitespace_keys = [ :email ]
  38. # Tell if authentication through request.params is enabled. True by default.
  39. # config.params_authenticatable = true
  40. # Tell if authentication through HTTP Basic Auth is enabled. False by default.
  41. config.http_authenticatable = true
  42. # If http headers should be returned for AJAX requests. True by default.
  43. # config.http_authenticatable_on_xhr = true
  44. # The realm used in Http Basic Authentication. "Application" by default.
  45. # config.http_authentication_realm = "Application"
  46. # ==> Configuration for :database_authenticatable
  47. # For bcrypt, this is the cost for hashing the password and defaults to 10. If
  48. # using other encryptors, it sets how many times you want the password re-encrypted.
  49. config.stretches = 10
  50. # ==> Configuration for :confirmable
  51. # The time you want to give your user to confirm his account. During this time
  52. # he will be able to access your application without confirming. Default is nil.
  53. # When confirm_within is zero, the user won't be able to sign in without confirming.
  54. # You can use this to let your user access some features of your application
  55. # without confirming the account, but blocking it after a certain period
  56. # (ie 2 days).
  57. # config.confirm_within = 2.days
  58. # Defines which key will be used when confirming an account
  59. # config.confirmation_keys = [ :email ]
  60. # ==> Configuration for :rememberable
  61. # The time the user will be remembered without asking for credentials again.
  62. # config.remember_for = 2.weeks
  63. # If true, a valid remember token can be re-used between multiple browsers.
  64. # config.remember_across_browsers = true
  65. # If true, extends the user's remember period when remembered via cookie.
  66. # config.extend_remember_period = false
  67. # If true, uses the password salt as remember token. This should be turned
  68. # to false if you are not using database authenticatable.
  69. config.use_salt_as_remember_token = true
  70. # ==> Configuration for :validatable
  71. # Range for password length. Default is 6..128.
  72. # config.password_length = 6..128
  73. # Regex to use to validate the email address
  74. # config.email_regexp = /^([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})$/i
  75. # ==> Configuration for :timeoutable
  76. # The time you want to timeout the user session without activity. After this
  77. # time the user will be asked for credentials again. Default is 30 minutes.
  78. # config.timeout_in = 30.minutes
  79. # ==> Configuration for :lockable
  80. # Defines which strategy will be used to lock an account.
  81. # :failed_attempts = Locks an account after a number of failed attempts to sign in.
  82. # :none = No lock strategy. You should handle locking by yourself.
  83. # config.lock_strategy = :failed_attempts
  84. # Defines which key will be used when locking and unlocking an account
  85. # config.unlock_keys = [ :email ]
  86. # Defines which strategy will be used to unlock an account.
  87. # :email = Sends an unlock link to the user email
  88. # :time = Re-enables login after a certain amount of time (see :unlock_in below)
  89. # :both = Enables both strategies
  90. # :none = No unlock strategy. You should handle unlocking by yourself.
  91. # config.unlock_strategy = :both
  92. # Number of authentication tries before locking an account if lock_strategy
  93. # is failed attempts.
  94. # config.maximum_attempts = 20
  95. # Time interval to unlock the account if :time is enabled as unlock_strategy.
  96. # config.unlock_in = 1.hour
  97. # ==> Configuration for :recoverable
  98. #
  99. # Defines which key will be used when recovering the password for an account
  100. # config.reset_password_keys = [ :email ]
  101. # Time interval you can reset your password with a reset password key.
  102. # Don't put a too small interval or your users won't have the time to
  103. # change their passwords.
  104. config.reset_password_within = 2.hours
  105. # ==> Configuration for :encryptable
  106. # Allow you to use another encryption algorithm besides bcrypt (default). You can use
  107. # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
  108. # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
  109. # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
  110. # REST_AUTH_SITE_KEY to pepper)
  111. config.encryptor = :sha512
  112. # Setup a pepper to generate the encrypted password.
  113. config.pepper = "d142367154e5beacca404b1a6a4f8bc52c6fdcfa3ccc3cf8eb49f3458a688ee6ac3b9fae488432a3bfca863b8a90008368a9f3a3dfbe5a962e64b6ab8f3a3a1a"
  114. # ==> Configuration for :token_authenticatable
  115. # Defines name of the authentication token params key
  116. # config.token_authentication_key = :auth_token
  117. # If true, authentication through token does not store user in session and needs
  118. # to be supplied on each request. Useful if you are using the token as API token.
  119. # config.stateless_token = false
  120. # ==> Scopes configuration
  121. # Turn scoped views on. Before rendering "sessions/new", it will first check for
  122. # "users/sessions/new". It's turned off by default because it's slower if you
  123. # are using only default views.
  124. # config.scoped_views = false
  125. # Configure the default scope given to Warden. By default it's the first
  126. # devise role declared in your routes (usually :user).
  127. # config.default_scope = :user
  128. # Configure sign_out behavior.
  129. # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
  130. # The default is true, which means any logout action will sign out all active scopes.
  131. # config.sign_out_all_scopes = true
  132. # ==> Navigation configuration
  133. # Lists the formats that should be treated as navigational. Formats like
  134. # :html, should redirect to the sign in page when the user does not have
  135. # access, but formats like :xml or :json, should return 401.
  136. # If you have any extra navigational formats, like :iphone or :mobile, you
  137. # should add them to the navigational formats lists. Default is [:html]
  138. # config.navigational_formats = [:html, :iphone]
  139. # The default HTTP method used to sign out a resource. Default is :get.
  140. # config.sign_out_via = :get
  141. # ==> OmniAuth
  142. config.omniauth :facebook, 'APP_ID', 'APP_SECRET', :scope => 'email,offline_access'
  143. config.omniauth :open_id
  144. config.omniauth :open_id, :name => 'google', :identifier => 'https://www.google.com/accounts/o8/id'
  145. # ==> Warden configuration
  146. # If you want to use other strategies, that are not supported by Devise, or
  147. # change the failure app, you can configure them inside the config.warden block.
  148. #
  149. # config.warden do |manager|
  150. # manager.failure_app = AnotherApp
  151. # manager.default_strategies(:scope => :user).unshift :some_external_strategy
  152. # end
  153. end