PageRenderTime 126ms CodeModel.GetById 20ms app.highlight 93ms RepoModel.GetById 1ms app.codeStats 1ms

/vendor/gc/Makefile.in

http://github.com/feyeleanor/RubyGoLightly
Autoconf | 1455 lines | 1212 code | 106 blank | 137 comment | 191 complexity | 9c89c4dd80eddd55622d0ca73732a7c0 MD5 | raw file
   1# Makefile.in generated by automake 1.9.6 from Makefile.am.
   2# @configure_input@
   3
   4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5# 2003, 2004, 2005  Free Software Foundation, Inc.
   6# This Makefile.in is free software; the Free Software Foundation
   7# gives unlimited permission to copy and/or distribute it,
   8# with or without modifications, as long as this notice is preserved.
   9
  10# This program is distributed in the hope that it will be useful,
  11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13# PARTICULAR PURPOSE.
  14
  15@SET_MAKE@
  16
  17# Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved.
  18# 
  19# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
  20# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
  21# 
  22# Permission is hereby granted to use or copy this program
  23# for any purpose,  provided the above notices are retained on all copies.
  24# Permission to modify the code and to distribute modified code is granted,
  25# provided the above notices are retained, and a notice that the code was
  26# modified is included with the above copyright notice.
  27#
  28# Original author: Tom Tromey
  29# Severely truncated by Hans-J. Boehm
  30# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
  31# Modified by: Petter Urkedal <petter.urkedal@nordita.dk> (2005-04)
  32
  33# 
  34# 
  35# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
  36# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
  37# 
  38# Permission is hereby granted to use or copy this program
  39# for any purpose,  provided the above notices are retained on all copies.
  40# Permission to modify the code and to distribute modified code is granted,
  41# provided the above notices are retained, and a notice that the code was
  42# modified is included with the above copyright notice.
  43#
  44# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
  45# Modified by: Petter Urkedal <petter.urkedal@nordita.dk>
  46
  47#
  48#
  49# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
  50# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
  51#
  52# Permission is hereby granted to use or copy this program
  53# for any purpose,  provided the above notices are retained on all copies.
  54# Permission to modify the code and to distribute modified code is granted,
  55# provided the above notices are retained, and a notice that the code was
  56# modified is included with the above copyright notice.
  57
  58# 
  59# 
  60# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
  61# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
  62# 
  63# Permission is hereby granted to use or copy this program
  64# for any purpose,  provided the above notices are retained on all copies.
  65# Permission to modify the code and to distribute modified code is granted,
  66# provided the above notices are retained, and a notice that the code was
  67# modified is included with the above copyright notice.
  68#
  69# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
  70# Modified by: Petter Urkedal <petter.urkedal@nordita.dk>
  71
  72
  73
  74
  75srcdir = @srcdir@
  76top_srcdir = @top_srcdir@
  77VPATH = @srcdir@
  78pkgdatadir = $(datadir)/@PACKAGE@
  79pkglibdir = $(libdir)/@PACKAGE@
  80pkgincludedir = $(includedir)/@PACKAGE@
  81top_builddir = .
  82am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  83INSTALL = @INSTALL@
  84install_sh_DATA = $(install_sh) -c -m 644
  85install_sh_PROGRAM = $(install_sh) -c
  86install_sh_SCRIPT = $(install_sh) -c
  87INSTALL_HEADER = $(INSTALL_DATA)
  88transform = $(program_transform_name)
  89NORMAL_INSTALL = :
  90PRE_INSTALL = :
  91POST_INSTALL = :
  92NORMAL_UNINSTALL = :
  93PRE_UNINSTALL = :
  94POST_UNINSTALL = :
  95build_triplet = @build@
  96host_triplet = @host@
  97target_triplet = @target@
  98check_PROGRAMS = gctest$(EXEEXT) leaktest$(EXEEXT) middletest$(EXEEXT) \
  99	smashtest$(EXEEXT) hugetest$(EXEEXT) $(am__EXEEXT_1) \
 100	$(am__EXEEXT_2)
 101
 102# C Library: Architecture Dependent
 103# ---------------------------------
 104@PTHREADS_TRUE@am__append_1 = pthread_support.c pthread_stop_world.c
 105@DARWIN_THREADS_TRUE@am__append_2 = darwin_stop_world.c
 106@WIN32_THREADS_TRUE@am__append_3 = win32_threads.c
 107
 108# C++ Interface
 109# -------------
 110@CPLUSPLUS_TRUE@am__append_4 = libgccpp.la
 111@CPLUSPLUS_TRUE@am__append_5 = include/gc_cpp.h include/gc_allocator.h
 112DIST_COMMON = $(am__configure_deps) $(am__pkginclude_HEADERS_DIST) \
 113	$(dist_noinst_HEADERS) $(dist_noinst_SCRIPTS) \
 114	$(dist_pkgconfig_DATA) $(dist_pkgdata_DATA) $(include_HEADERS) \
 115	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 116	$(srcdir)/bdw-gc.pc.in $(srcdir)/cord/cord.am \
 117	$(srcdir)/doc/doc.am $(srcdir)/include/include.am \
 118	$(srcdir)/tests/tests.am $(top_srcdir)/configure ChangeLog \
 119	compile config.guess config.sub depcomp install-sh ltmain.sh \
 120	missing mkinstalldirs
 121
 122#TESTS += tracetest$(EXEEXT)
 123#check_PROGRAMS += tracetest
 124#tracetest_SOURCES = tests/trace_test.c
 125#tracetest_LDADD = $(test_ldadd)
 126@THREADS_TRUE@am__append_6 = threadleaktest$(EXEEXT)
 127@THREADS_TRUE@am__append_7 = threadleaktest
 128@CPLUSPLUS_TRUE@am__append_8 = test_cpp$(EXEEXT)
 129@CPLUSPLUS_TRUE@am__append_9 = test_cpp
 130subdir = .
 131ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 132am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
 133	$(top_srcdir)/libtool.m4 $(top_srcdir)/configure.ac
 134am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 135	$(ACLOCAL_M4)
 136am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 137 configure.lineno configure.status.lineno
 138mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 139CONFIG_CLEAN_FILES = bdw-gc.pc
 140am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 141am__vpath_adj = case $$p in \
 142    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 143    *) f=$$p;; \
 144  esac;
 145am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 146am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \
 147	"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)" \
 148	"$(DESTDIR)$(pkgincludedir)"
 149libLTLIBRARIES_INSTALL = $(INSTALL)
 150LTLIBRARIES = $(lib_LTLIBRARIES)
 151libcord_la_DEPENDENCIES = $(top_builddir)/libgc.la
 152am__dirstamp = $(am__leading_dot)dirstamp
 153am_libcord_la_OBJECTS = cord/cordbscs.lo cord/cordprnt.lo \
 154	cord/cordtest.lo cord/cordxtra.lo
 155libcord_la_OBJECTS = $(am_libcord_la_OBJECTS)
 156am__DEPENDENCIES_1 =
 157am__libgc_la_SOURCES_DIST = allchblk.c alloc.c blacklst.c checksums.c \
 158	dbg_mlc.c dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c \
 159	headers.c malloc.c mallocx.c mark.c mark_rts.c misc.c \
 160	new_hblk.c obj_map.c os_dep.c pcr_interface.c ptr_chck.c \
 161	real_malloc.c reclaim.c specific.c stubborn.c typd_mlc.c \
 162	backgraph.c thread_local_alloc.c pthread_support.c \
 163	pthread_stop_world.c darwin_stop_world.c win32_threads.c
 164@PTHREADS_TRUE@am__objects_1 = pthread_support.lo \
 165@PTHREADS_TRUE@	pthread_stop_world.lo
 166@DARWIN_THREADS_TRUE@am__objects_2 = darwin_stop_world.lo
 167@WIN32_THREADS_TRUE@am__objects_3 = win32_threads.lo
 168am_libgc_la_OBJECTS = allchblk.lo alloc.lo blacklst.lo checksums.lo \
 169	dbg_mlc.lo dyn_load.lo finalize.lo gc_dlopen.lo gcj_mlc.lo \
 170	headers.lo malloc.lo mallocx.lo mark.lo mark_rts.lo misc.lo \
 171	new_hblk.lo obj_map.lo os_dep.lo pcr_interface.lo ptr_chck.lo \
 172	real_malloc.lo reclaim.lo specific.lo stubborn.lo typd_mlc.lo \
 173	backgraph.lo thread_local_alloc.lo $(am__objects_1) \
 174	$(am__objects_2) $(am__objects_3)
 175@NEED_ATOMIC_OPS_ASM_FALSE@@USE_INTERNAL_LIBATOMIC_OPS_TRUE@nodist_libgc_la_OBJECTS = ./atomic_ops.lo
 176@NEED_ATOMIC_OPS_ASM_TRUE@nodist_libgc_la_OBJECTS =  \
 177@NEED_ATOMIC_OPS_ASM_TRUE@	./atomic_ops_sysdeps.lo
 178libgc_la_OBJECTS = $(am_libgc_la_OBJECTS) $(nodist_libgc_la_OBJECTS)
 179@CPLUSPLUS_TRUE@libgccpp_la_DEPENDENCIES = ./libgc.la
 180am__libgccpp_la_SOURCES_DIST = gc_cpp.cc
 181@CPLUSPLUS_TRUE@am_libgccpp_la_OBJECTS = gc_cpp.lo
 182libgccpp_la_OBJECTS = $(am_libgccpp_la_OBJECTS)
 183@CPLUSPLUS_TRUE@am_libgccpp_la_rpath = -rpath $(libdir)
 184@THREADS_TRUE@am__EXEEXT_1 = threadleaktest$(EXEEXT)
 185@CPLUSPLUS_TRUE@am__EXEEXT_2 = test_cpp$(EXEEXT)
 186am_gctest_OBJECTS = tests/test.$(OBJEXT)
 187gctest_OBJECTS = $(am_gctest_OBJECTS)
 188am__DEPENDENCIES_2 = $(top_builddir)/libgc.la $(am__DEPENDENCIES_1)
 189am_hugetest_OBJECTS = tests/huge_test.$(OBJEXT)
 190hugetest_OBJECTS = $(am_hugetest_OBJECTS)
 191hugetest_DEPENDENCIES = $(am__DEPENDENCIES_2)
 192am_leaktest_OBJECTS = tests/leak_test.$(OBJEXT)
 193leaktest_OBJECTS = $(am_leaktest_OBJECTS)
 194leaktest_DEPENDENCIES = $(am__DEPENDENCIES_2)
 195am_middletest_OBJECTS = tests/middle.$(OBJEXT)
 196middletest_OBJECTS = $(am_middletest_OBJECTS)
 197middletest_DEPENDENCIES = $(am__DEPENDENCIES_2)
 198am_smashtest_OBJECTS = tests/smash_test.$(OBJEXT)
 199smashtest_OBJECTS = $(am_smashtest_OBJECTS)
 200smashtest_DEPENDENCIES = $(am__DEPENDENCIES_2)
 201am__test_cpp_SOURCES_DIST = tests/test_cpp.cc
 202@CPLUSPLUS_TRUE@am_test_cpp_OBJECTS = tests/test_cpp.$(OBJEXT)
 203test_cpp_OBJECTS = $(am_test_cpp_OBJECTS)
 204@AVOID_CPP_LIB_FALSE@@CPLUSPLUS_TRUE@test_cpp_DEPENDENCIES =  \
 205@AVOID_CPP_LIB_FALSE@@CPLUSPLUS_TRUE@	libgccpp.la \
 206@AVOID_CPP_LIB_FALSE@@CPLUSPLUS_TRUE@	$(am__DEPENDENCIES_2)
 207@AVOID_CPP_LIB_TRUE@@CPLUSPLUS_TRUE@test_cpp_DEPENDENCIES = gc_cpp.o \
 208@AVOID_CPP_LIB_TRUE@@CPLUSPLUS_TRUE@	$(am__DEPENDENCIES_2)
 209am__threadleaktest_SOURCES_DIST = tests/thread_leak_test.c
 210@THREADS_TRUE@am_threadleaktest_OBJECTS =  \
 211@THREADS_TRUE@	tests/thread_leak_test.$(OBJEXT)
 212threadleaktest_OBJECTS = $(am_threadleaktest_OBJECTS)
 213@THREADS_TRUE@threadleaktest_DEPENDENCIES = $(am__DEPENDENCIES_2)
 214SCRIPTS = $(dist_noinst_SCRIPTS)
 215DEFAULT_INCLUDES = 
 216depcomp = $(SHELL) $(top_srcdir)/depcomp
 217am__depfiles_maybe = depfiles
 218CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
 219LTCCASCOMPILE = $(LIBTOOL) --mode=compile $(CCAS) $(AM_CCASFLAGS) \
 220	$(CCASFLAGS)
 221COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 222	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 223LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
 224	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 225	$(AM_CFLAGS) $(CFLAGS)
 226CCLD = $(CC)
 227LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 228	$(AM_LDFLAGS) $(LDFLAGS) -o $@
 229CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 230	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 231LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
 232	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 233	$(AM_CXXFLAGS) $(CXXFLAGS)
 234CXXLD = $(CXX)
 235CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
 236	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
 237SOURCES = $(libcord_la_SOURCES) $(libgc_la_SOURCES) \
 238	$(EXTRA_libgc_la_SOURCES) $(nodist_libgc_la_SOURCES) \
 239	$(libgccpp_la_SOURCES) $(gctest_SOURCES) $(hugetest_SOURCES) \
 240	$(leaktest_SOURCES) $(middletest_SOURCES) $(smashtest_SOURCES) \
 241	$(test_cpp_SOURCES) $(threadleaktest_SOURCES)
 242DIST_SOURCES = $(libcord_la_SOURCES) $(am__libgc_la_SOURCES_DIST) \
 243	$(EXTRA_libgc_la_SOURCES) $(am__libgccpp_la_SOURCES_DIST) \
 244	$(gctest_SOURCES) $(hugetest_SOURCES) $(leaktest_SOURCES) \
 245	$(middletest_SOURCES) $(smashtest_SOURCES) \
 246	$(am__test_cpp_SOURCES_DIST) \
 247	$(am__threadleaktest_SOURCES_DIST)
 248RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 249	html-recursive info-recursive install-data-recursive \
 250	install-exec-recursive install-info-recursive \
 251	install-recursive installcheck-recursive installdirs-recursive \
 252	pdf-recursive ps-recursive uninstall-info-recursive \
 253	uninstall-recursive
 254dist_pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 255dist_pkgdataDATA_INSTALL = $(INSTALL_DATA)
 256DATA = $(dist_pkgconfig_DATA) $(dist_pkgdata_DATA)
 257includeHEADERS_INSTALL = $(INSTALL_HEADER)
 258am__pkginclude_HEADERS_DIST = include/gc_cpp.h include/gc_allocator.h \
 259	include/gc.h include/gc_typed.h include/gc_inline.h \
 260	include/gc_mark.h include/weakpointer.h include/new_gc_alloc.h \
 261	include/gc_backptr.h include/gc_gcj.h include/leak_detector.h \
 262	include/gc_amiga_redirects.h include/gc_pthread_redirects.h \
 263	include/gc_config_macros.h include/gc_tiny_fl.h \
 264	include/gc_version.h
 265pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
 266HEADERS = $(dist_noinst_HEADERS) $(include_HEADERS) \
 267	$(pkginclude_HEADERS)
 268ETAGS = etags
 269CTAGS = ctags
 270DIST_SUBDIRS = $(SUBDIRS)
 271DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 272distdir = $(PACKAGE)-$(VERSION)
 273top_distdir = $(distdir)
 274am__remove_distdir = \
 275  { test ! -d $(distdir) \
 276    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
 277         && rm -fr $(distdir); }; }
 278DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 279GZIP_ENV = --best
 280distuninstallcheck_listfiles = find . -type f -print
 281distcleancheck_listfiles = find . -type f -print
 282ACLOCAL = @ACLOCAL@
 283AMDEP_FALSE = @AMDEP_FALSE@
 284AMDEP_TRUE = @AMDEP_TRUE@
 285AMTAR = @AMTAR@
 286AR = @AR@
 287AUTOCONF = @AUTOCONF@
 288AUTOHEADER = @AUTOHEADER@
 289AUTOMAKE = @AUTOMAKE@
 290AVOID_CPP_LIB_FALSE = @AVOID_CPP_LIB_FALSE@
 291AVOID_CPP_LIB_TRUE = @AVOID_CPP_LIB_TRUE@
 292AWK = @AWK@
 293CC = @CC@
 294CCAS = @CCAS@
 295CCASFLAGS = @CCASFLAGS@ $(DEFS)
 296CCDEPMODE = @CCDEPMODE@
 297CFLAGS = @CFLAGS@
 298COMPILER_XLC_FALSE = @COMPILER_XLC_FALSE@
 299COMPILER_XLC_TRUE = @COMPILER_XLC_TRUE@
 300CPLUSPLUS_FALSE = @CPLUSPLUS_FALSE@
 301CPLUSPLUS_TRUE = @CPLUSPLUS_TRUE@
 302CPP = @CPP@
 303CPPFLAGS = @CPPFLAGS@
 304CXX = @CXX@
 305CXXCPP = @CXXCPP@
 306CXXDEPMODE = @CXXDEPMODE@
 307CXXFLAGS = @CXXFLAGS@
 308CXXINCLUDES = @CXXINCLUDES@
 309CYGPATH_W = @CYGPATH_W@
 310DARWIN_THREADS_FALSE = @DARWIN_THREADS_FALSE@
 311DARWIN_THREADS_TRUE = @DARWIN_THREADS_TRUE@
 312DEFS = @DEFS@
 313DEPDIR = @DEPDIR@
 314ECHO = @ECHO@
 315ECHO_C = @ECHO_C@
 316ECHO_N = @ECHO_N@
 317ECHO_T = @ECHO_T@
 318EGREP = @EGREP@
 319ENABLE_GCJ_SUPPORT_FALSE = @ENABLE_GCJ_SUPPORT_FALSE@
 320ENABLE_GCJ_SUPPORT_TRUE = @ENABLE_GCJ_SUPPORT_TRUE@
 321EXEEXT = @EXEEXT@
 322EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@
 323F77 = @F77@
 324FFLAGS = @FFLAGS@
 325GC_CFLAGS = @GC_CFLAGS@
 326GC_VERSION = @GC_VERSION@
 327GREP = @GREP@
 328INCLUDES = @INCLUDES@
 329INSTALL_DATA = @INSTALL_DATA@
 330INSTALL_PROGRAM = @INSTALL_PROGRAM@
 331INSTALL_SCRIPT = @INSTALL_SCRIPT@
 332INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 333LDFLAGS = @LDFLAGS@
 334LIBOBJS = @LIBOBJS@
 335LIBS = @LIBS@
 336LIBTOOL = @LIBTOOL@
 337LN_S = @LN_S@
 338LTLIBOBJS = @LTLIBOBJS@
 339MAINT = @MAINT@
 340MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
 341MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 342MAKEINFO = @MAKEINFO@
 343NEED_ATOMIC_OPS_ASM_FALSE = @NEED_ATOMIC_OPS_ASM_FALSE@
 344NEED_ATOMIC_OPS_ASM_TRUE = @NEED_ATOMIC_OPS_ASM_TRUE@
 345OBJEXT = @OBJEXT@
 346PACKAGE = @PACKAGE@
 347PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 348PACKAGE_NAME = @PACKAGE_NAME@
 349PACKAGE_STRING = @PACKAGE_STRING@
 350PACKAGE_TARNAME = @PACKAGE_TARNAME@
 351PACKAGE_VERSION = @PACKAGE_VERSION@
 352PATH_SEPARATOR = @PATH_SEPARATOR@
 353PTHREADS_FALSE = @PTHREADS_FALSE@
 354PTHREADS_TRUE = @PTHREADS_TRUE@
 355RANLIB = @RANLIB@
 356SET_MAKE = @SET_MAKE@
 357SHELL = @SHELL@
 358STRIP = @STRIP@
 359THREADDLLIBS = @THREADDLLIBS@
 360THREADS_FALSE = @THREADS_FALSE@
 361THREADS_TRUE = @THREADS_TRUE@
 362UNWINDLIBS = @UNWINDLIBS@
 363USE_INTERNAL_LIBATOMIC_OPS_FALSE = @USE_INTERNAL_LIBATOMIC_OPS_FALSE@
 364USE_INTERNAL_LIBATOMIC_OPS_TRUE = @USE_INTERNAL_LIBATOMIC_OPS_TRUE@
 365USE_LIBDIR_FALSE = @USE_LIBDIR_FALSE@
 366USE_LIBDIR_TRUE = @USE_LIBDIR_TRUE@
 367VERSION = @VERSION@
 368WIN32_THREADS_FALSE = @WIN32_THREADS_FALSE@
 369WIN32_THREADS_TRUE = @WIN32_THREADS_TRUE@
 370ac_ct_CC = @ac_ct_CC@
 371ac_ct_CXX = @ac_ct_CXX@
 372ac_ct_F77 = @ac_ct_F77@
 373addlibs = @addlibs@
 374addobjs = @addobjs@
 375am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 376am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 377am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
 378am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 379am__include = @am__include@
 380am__leading_dot = @am__leading_dot@
 381am__quote = @am__quote@
 382am__tar = @am__tar@
 383am__untar = @am__untar@
 384atomic_ops_libs = @atomic_ops_libs@
 385bindir = @bindir@
 386build = @build@
 387build_alias = @build_alias@
 388build_cpu = @build_cpu@
 389build_os = @build_os@
 390build_vendor = @build_vendor@
 391datadir = @datadir@
 392datarootdir = @datarootdir@
 393docdir = @docdir@
 394dvidir = @dvidir@
 395exec_prefix = @exec_prefix@
 396extra_ldflags_libgc = @extra_ldflags_libgc@
 397host = @host@
 398host_alias = @host_alias@
 399host_cpu = @host_cpu@
 400host_os = @host_os@
 401host_vendor = @host_vendor@
 402htmldir = @htmldir@
 403includedir = @includedir@
 404infodir = @infodir@
 405install_sh = @install_sh@
 406libdir = @libdir@
 407libexecdir = @libexecdir@
 408localedir = @localedir@
 409localstatedir = @localstatedir@
 410mandir = @mandir@
 411mkdir_p = @mkdir_p@
 412oldincludedir = @oldincludedir@
 413pdfdir = @pdfdir@
 414prefix = @prefix@
 415program_transform_name = @program_transform_name@
 416psdir = @psdir@
 417sbindir = @sbindir@
 418sharedstatedir = @sharedstatedir@
 419subdirs = @subdirs@
 420sysconfdir = @sysconfdir@
 421target = @target@
 422target_alias = @target_alias@
 423target_all = @target_all@
 424target_cpu = @target_cpu@
 425target_os = @target_os@
 426target_vendor = @target_vendor@
 427
 428# We currently use the source files directly from libatomic_ops, if we
 429# use the internal version.  This is done since libatomic_ops doesn't
 430# use libtool, since it has no real use for it.  But that seems to make
 431# it hard to use either the resulting object files or libraries.
 432# Thus there seems too be no real reason to recusively build in the
 433# libatomic_ops directory.
 434# if USE_INTERNAL_LIBATOMICS_OPS
 435# SUBDIRS = @maybe_libatomic_ops@
 436# else
 437# SUBDIRS =
 438# endif
 439SUBDIRS = 
 440
 441# Initialize variables so that we can declare files locally.
 442
 443# FIXME: If Visual C++ users use Makefile.am, this should go into
 444# pkginclude_HEADERS with proper AM_CONDITIONALization.  Otherwise
 445# delete this comment.
 446
 447# headers which are not installed
 448# (see include/include.am for more)
 449#
 450
 451# documentation which is not installed
 452#
 453
 454# other makefiles
 455# :GOTCHA: deliberately we do not include 'Makefile'
 456
 457# files used by makefiles other than Makefile.am
 458#
 459
 460# The libatomic_ops library.  This is not ideal, since we pick up junk from
 461# there.  The hard-coded version number should also go.
 462
 463# :FIXME: why do we distribute this one???
 464#
 465EXTRA_DIST = gc_cpp.cpp README.QUICK BCC_MAKEFILE NT_MAKEFILE \
 466	NT_THREADS_MAKEFILE OS2_MAKEFILE PCR-Makefile digimars.mak \
 467	EMX_MAKEFILE Makefile.direct Makefile.dj Makefile.DLLs \
 468	SMakefile.amiga WCC_MAKEFILE configure_atomic_ops.sh \
 469	NT_STATIC_THREADS_MAKEFILE NT_X64_STATIC_THREADS_MAKEFILE \
 470	NT_X64_THREADS_MAKEFILE add_gc_prefix.c gcname.c if_mach.c \
 471	if_not_there.c hpux_test_and_clear.s gc.mak MacOS.c \
 472	MacProjects.sit.hqx mach_dep.c setjmp_t.c threadlibs.c \
 473	AmigaOS.c Mac_files/datastart.c Mac_files/dataend.c \
 474	Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
 475	include/private/msvc_dbg.h msvc_dbg.c libatomic_ops-1.2 \
 476	libtool.m4 cord/cordbscs.c cord/cordtest.c cord/de.c \
 477	cord/cordprnt.c cord/cordxtra.c cord/de_cmds.h cord/de_win.h \
 478	cord/de_win.c cord/de_win.RC cord/de_win.ICO
 479
 480# C Library
 481# ---------
 482lib_LTLIBRARIES = libgc.la $(am__append_4) libcord.la
 483
 484# unprefixed header
 485include_HEADERS = include/extra/gc.h include/extra/gc_cpp.h
 486
 487# installed headers
 488#
 489pkginclude_HEADERS = $(am__append_5) include/gc.h include/gc_typed.h \
 490	include/gc_inline.h include/gc_mark.h include/gc_cpp.h \
 491	include/weakpointer.h include/new_gc_alloc.h \
 492	include/gc_allocator.h include/gc_backptr.h include/gc_gcj.h \
 493	include/leak_detector.h include/gc_amiga_redirects.h \
 494	include/gc_pthread_redirects.h include/gc_config_macros.h \
 495	include/gc_tiny_fl.h include/gc_version.h
 496
 497# headers which are not installed
 498#
 499dist_noinst_HEADERS = include/private/gc_hdrs.h \
 500	include/private/gc_priv.h include/private/gcconfig.h \
 501	include/private/gc_pmark.h include/private/gc_locks.h \
 502	include/private/dbg_mlc.h include/private/specific.h \
 503	include/private/cord_pos.h include/private/pthread_support.h \
 504	include/private/pthread_stop_world.h \
 505	include/private/darwin_semaphore.h \
 506	include/private/darwin_stop_world.h \
 507	include/private/thread_local_alloc.h include/cord.h \
 508	include/ec.h include/javaxfc.h
 509TESTS = gctest$(EXEEXT) leaktest$(EXEEXT) middletest$(EXEEXT) \
 510	smashtest$(EXEEXT) hugetest$(EXEEXT) $(am__append_6) \
 511	$(am__append_8)
 512pkgconfigdir = $(libdir)/pkgconfig
 513dist_pkgconfig_DATA = bdw-gc.pc
 514libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \
 515	dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c malloc.c \
 516	mallocx.c mark.c mark_rts.c misc.c new_hblk.c obj_map.c \
 517	os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \
 518	specific.c stubborn.c typd_mlc.c backgraph.c \
 519	thread_local_alloc.c $(am__append_1) $(am__append_2) \
 520	$(am__append_3)
 521@NEED_ATOMIC_OPS_ASM_TRUE@nodist_libgc_la_SOURCES = ./atomic_ops_sysdeps.S 	 
 522@USE_INTERNAL_LIBATOMIC_OPS_TRUE@nodist_libgc_la_SOURCES = ./atomic_ops.c 	 
 523
 524# Include THREADDLLIBS here to ensure that the correct versions of
 525# linuxthread semaphore functions get linked:
 526libgc_la_LIBADD = @addobjs@ $(THREADDLLIBS) $(UNWINDLIBS)
 527libgc_la_DEPENDENCIES = @addobjs@
 528libgc_la_LDFLAGS = $(extra_ldflags_libgc) -version-info 1:3:0 -no-undefined
 529EXTRA_libgc_la_SOURCES = alpha_mach_dep.S \
 530    mips_sgi_mach_dep.s mips_ultrix_mach_dep.s \
 531    rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \
 532    sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s
 533
 534@CPLUSPLUS_TRUE@libgccpp_la_SOURCES = gc_cpp.cc
 535@CPLUSPLUS_TRUE@libgccpp_la_LIBADD = ./libgc.la
 536@CPLUSPLUS_TRUE@libgccpp_la_LDFLAGS = -version-info 1:3:0 -no-undefined
 537
 538# Misc
 539# ----
 540AM_CXXFLAGS = @GC_CFLAGS@
 541AM_CFLAGS = @GC_CFLAGS@
 542@COMPILER_XLC_FALSE@ASM_CPP_OPTIONS = -Wp,-P -x assembler-with-cpp
 543
 544#all_objs = @addobjs@ $(libgc_la_OBJECTS)
 545#$(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \
 546#include/private/gc_hdrs.h include/gc.h include/gc_gcj.h \
 547#include/gc_pthread_redirects.h include/gc_config_macros.h \
 548#include/private/thread_local_alloc.h include/private_support.h \
 549#include/private/pthread_stop_world.h \
 550#include/gc_mark.h @addincludes@
 551@COMPILER_XLC_TRUE@ASM_CPP_OPTIONS = 
 552dist_noinst_SCRIPTS = callprocs configure.host
 553
 554# this is an auxiliary shell file used by Makefile and Makefile.direct
 555#
 556CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host
 557libcord_la_LIBADD = $(top_builddir)/libgc.la
 558libcord_la_LDFLAGS = -version-info 1:3:0 -no-undefined
 559libcord_la_SOURCES = \
 560	cord/cordbscs.c				\
 561	cord/cordprnt.c				\
 562	cord/cordtest.c				\
 563	cord/cordxtra.c				
 564
 565
 566# Common libs to _LDADD for all tests.
 567test_ldadd = $(top_builddir)/libgc.la $(EXTRA_TEST_LIBS)
 568gctest_SOURCES = tests/test.c
 569gctest_LDADD = $(test_ldadd)
 570gctest_DEPENDENCIES = $(top_builddir)/libgc.la
 571leaktest_SOURCES = tests/leak_test.c
 572leaktest_LDADD = $(test_ldadd)
 573middletest_SOURCES = tests/middle.c
 574middletest_LDADD = $(test_ldadd)
 575smashtest_SOURCES = tests/smash_test.c
 576smashtest_LDADD = $(test_ldadd)
 577hugetest_SOURCES = tests/huge_test.c
 578hugetest_LDADD = $(test_ldadd)
 579@THREADS_TRUE@threadleaktest_SOURCES = tests/thread_leak_test.c
 580@THREADS_TRUE@threadleaktest_LDADD = $(test_ldadd)
 581@CPLUSPLUS_TRUE@test_cpp_SOURCES = tests/test_cpp.cc
 582@AVOID_CPP_LIB_FALSE@@CPLUSPLUS_TRUE@test_cpp_LDADD = libgccpp.la $(test_ldadd)
 583@AVOID_CPP_LIB_TRUE@@CPLUSPLUS_TRUE@test_cpp_LDADD = gc_cpp.o $(test_ldadd)
 584
 585# installed documentation
 586#
 587dist_pkgdata_DATA = \
 588	doc/barrett_diagram \
 589	doc/debugging.html \
 590	doc/gc.man \
 591	doc/gcdescr.html \
 592	doc/README \
 593	doc/README.amiga \
 594	doc/README.arm.cross \
 595	doc/README.autoconf \
 596	doc/README.changes \
 597	doc/README.contributors \
 598	doc/README.cords \
 599	doc/README.DGUX386 \
 600	doc/README.dj \
 601	doc/README.environment \
 602	doc/README.ews4800 \
 603	doc/README.hp \
 604	doc/README.linux \
 605	doc/README.Mac \
 606	doc/README.MacOSX \
 607	doc/README.macros \
 608	doc/README.OS2 \
 609	doc/README.rs6000 \
 610	doc/README.sgi \
 611	doc/README.solaris2 \
 612	doc/README.uts \
 613	doc/README.win32 \
 614	doc/README.win64 \
 615	doc/overview.html \
 616	doc/tree.html \
 617	doc/leak.html \
 618	doc/gcinterface.html \
 619	doc/scale.html \
 620	doc/README.darwin \
 621	doc/simple_example.html \
 622	doc/porting.html
 623
 624all: all-recursive
 625
 626.SUFFIXES:
 627.SUFFIXES: .S .c .cc .lo .o .obj .s
 628am--refresh:
 629	@:
 630$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/include/include.am $(srcdir)/cord/cord.am $(srcdir)/tests/tests.am $(srcdir)/doc/doc.am $(am__configure_deps)
 631	@for dep in $?; do \
 632	  case '$(am__configure_deps)' in \
 633	    *$$dep*) \
 634	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
 635	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
 636		&& exit 0; \
 637	      exit 1;; \
 638	  esac; \
 639	done; \
 640	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
 641	cd $(top_srcdir) && \
 642	  $(AUTOMAKE) --foreign  Makefile
 643.PRECIOUS: Makefile
 644Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 645	@case '$?' in \
 646	  *config.status*) \
 647	    echo ' $(SHELL) ./config.status'; \
 648	    $(SHELL) ./config.status;; \
 649	  *) \
 650	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 651	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 652	esac;
 653
 654$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 655	$(SHELL) ./config.status --recheck
 656
 657$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 658	cd $(srcdir) && $(AUTOCONF)
 659$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 660	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 661bdw-gc.pc: $(top_builddir)/config.status $(srcdir)/bdw-gc.pc.in
 662	cd $(top_builddir) && $(SHELL) ./config.status $@
 663install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 664	@$(NORMAL_INSTALL)
 665	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
 666	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 667	  if test -f $$p; then \
 668	    f=$(am__strip_dir) \
 669	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
 670	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 671	  else :; fi; \
 672	done
 673
 674uninstall-libLTLIBRARIES:
 675	@$(NORMAL_UNINSTALL)
 676	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 677	  p=$(am__strip_dir) \
 678	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
 679	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 680	done
 681
 682clean-libLTLIBRARIES:
 683	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
 684	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 685	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 686	  test "$$dir" != "$$p" || dir=.; \
 687	  echo "rm -f \"$${dir}/so_locations\""; \
 688	  rm -f "$${dir}/so_locations"; \
 689	done
 690cord/$(am__dirstamp):
 691	@$(mkdir_p) cord
 692	@: > cord/$(am__dirstamp)
 693cord/$(DEPDIR)/$(am__dirstamp):
 694	@$(mkdir_p) cord/$(DEPDIR)
 695	@: > cord/$(DEPDIR)/$(am__dirstamp)
 696cord/cordbscs.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
 697cord/cordprnt.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
 698cord/cordtest.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
 699cord/cordxtra.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp)
 700libcord.la: $(libcord_la_OBJECTS) $(libcord_la_DEPENDENCIES) 
 701	$(LINK) -rpath $(libdir) $(libcord_la_LDFLAGS) $(libcord_la_OBJECTS) $(libcord_la_LIBADD) $(LIBS)
 702./$(am__dirstamp):
 703	@$(mkdir_p) .
 704	@: > ./$(am__dirstamp)
 705$(DEPDIR)/$(am__dirstamp):
 706	@$(mkdir_p) ./$(DEPDIR)
 707	@: > $(DEPDIR)/$(am__dirstamp)
 708./atomic_ops_sysdeps.lo: ./$(am__dirstamp) $(DEPDIR)/$(am__dirstamp)
 709./atomic_ops.lo: ./$(am__dirstamp) $(DEPDIR)/$(am__dirstamp)
 710libgc.la: $(libgc_la_OBJECTS) $(libgc_la_DEPENDENCIES) 
 711	$(LINK) -rpath $(libdir) $(libgc_la_LDFLAGS) $(libgc_la_OBJECTS) $(libgc_la_LIBADD) $(LIBS)
 712libgccpp.la: $(libgccpp_la_OBJECTS) $(libgccpp_la_DEPENDENCIES) 
 713	$(CXXLINK) $(am_libgccpp_la_rpath) $(libgccpp_la_LDFLAGS) $(libgccpp_la_OBJECTS) $(libgccpp_la_LIBADD) $(LIBS)
 714
 715clean-checkPROGRAMS:
 716	@list='$(check_PROGRAMS)'; for p in $$list; do \
 717	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
 718	  echo " rm -f $$p $$f"; \
 719	  rm -f $$p $$f ; \
 720	done
 721tests/$(am__dirstamp):
 722	@$(mkdir_p) tests
 723	@: > tests/$(am__dirstamp)
 724tests/$(DEPDIR)/$(am__dirstamp):
 725	@$(mkdir_p) tests/$(DEPDIR)
 726	@: > tests/$(DEPDIR)/$(am__dirstamp)
 727tests/test.$(OBJEXT): tests/$(am__dirstamp) \
 728	tests/$(DEPDIR)/$(am__dirstamp)
 729gctest$(EXEEXT): $(gctest_OBJECTS) $(gctest_DEPENDENCIES) 
 730	@rm -f gctest$(EXEEXT)
 731	$(LINK) $(gctest_LDFLAGS) $(gctest_OBJECTS) $(gctest_LDADD) $(LIBS)
 732tests/huge_test.$(OBJEXT): tests/$(am__dirstamp) \
 733	tests/$(DEPDIR)/$(am__dirstamp)
 734hugetest$(EXEEXT): $(hugetest_OBJECTS) $(hugetest_DEPENDENCIES) 
 735	@rm -f hugetest$(EXEEXT)
 736	$(LINK) $(hugetest_LDFLAGS) $(hugetest_OBJECTS) $(hugetest_LDADD) $(LIBS)
 737tests/leak_test.$(OBJEXT): tests/$(am__dirstamp) \
 738	tests/$(DEPDIR)/$(am__dirstamp)
 739leaktest$(EXEEXT): $(leaktest_OBJECTS) $(leaktest_DEPENDENCIES) 
 740	@rm -f leaktest$(EXEEXT)
 741	$(LINK) $(leaktest_LDFLAGS) $(leaktest_OBJECTS) $(leaktest_LDADD) $(LIBS)
 742tests/middle.$(OBJEXT): tests/$(am__dirstamp) \
 743	tests/$(DEPDIR)/$(am__dirstamp)
 744middletest$(EXEEXT): $(middletest_OBJECTS) $(middletest_DEPENDENCIES) 
 745	@rm -f middletest$(EXEEXT)
 746	$(LINK) $(middletest_LDFLAGS) $(middletest_OBJECTS) $(middletest_LDADD) $(LIBS)
 747tests/smash_test.$(OBJEXT): tests/$(am__dirstamp) \
 748	tests/$(DEPDIR)/$(am__dirstamp)
 749smashtest$(EXEEXT): $(smashtest_OBJECTS) $(smashtest_DEPENDENCIES) 
 750	@rm -f smashtest$(EXEEXT)
 751	$(LINK) $(smashtest_LDFLAGS) $(smashtest_OBJECTS) $(smashtest_LDADD) $(LIBS)
 752tests/test_cpp.$(OBJEXT): tests/$(am__dirstamp) \
 753	tests/$(DEPDIR)/$(am__dirstamp)
 754test_cpp$(EXEEXT): $(test_cpp_OBJECTS) $(test_cpp_DEPENDENCIES) 
 755	@rm -f test_cpp$(EXEEXT)
 756	$(CXXLINK) $(test_cpp_LDFLAGS) $(test_cpp_OBJECTS) $(test_cpp_LDADD) $(LIBS)
 757tests/thread_leak_test.$(OBJEXT): tests/$(am__dirstamp) \
 758	tests/$(DEPDIR)/$(am__dirstamp)
 759threadleaktest$(EXEEXT): $(threadleaktest_OBJECTS) $(threadleaktest_DEPENDENCIES) 
 760	@rm -f threadleaktest$(EXEEXT)
 761	$(LINK) $(threadleaktest_LDFLAGS) $(threadleaktest_OBJECTS) $(threadleaktest_LDADD) $(LIBS)
 762
 763mostlyclean-compile:
 764	-rm -f *.$(OBJEXT)
 765	-rm -f ./atomic_ops.$(OBJEXT)
 766	-rm -f ./atomic_ops.lo
 767	-rm -f ./atomic_ops_sysdeps.$(OBJEXT)
 768	-rm -f ./atomic_ops_sysdeps.lo
 769	-rm -f cord/cordbscs.$(OBJEXT)
 770	-rm -f cord/cordbscs.lo
 771	-rm -f cord/cordprnt.$(OBJEXT)
 772	-rm -f cord/cordprnt.lo
 773	-rm -f cord/cordtest.$(OBJEXT)
 774	-rm -f cord/cordtest.lo
 775	-rm -f cord/cordxtra.$(OBJEXT)
 776	-rm -f cord/cordxtra.lo
 777	-rm -f tests/huge_test.$(OBJEXT)
 778	-rm -f tests/leak_test.$(OBJEXT)
 779	-rm -f tests/middle.$(OBJEXT)
 780	-rm -f tests/smash_test.$(OBJEXT)
 781	-rm -f tests/test.$(OBJEXT)
 782	-rm -f tests/test_cpp.$(OBJEXT)
 783	-rm -f tests/thread_leak_test.$(OBJEXT)
 784
 785distclean-compile:
 786	-rm -f *.tab.c
 787
 788@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/allchblk.Plo@am__quote@
 789@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@
 790@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atomic_ops.Plo@am__quote@
 791@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backgraph.Plo@am__quote@
 792@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blacklst.Plo@am__quote@
 793@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/checksums.Plo@am__quote@
 794@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/darwin_stop_world.Plo@am__quote@
 795@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbg_mlc.Plo@am__quote@
 796@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_load.Plo@am__quote@
 797@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/finalize.Plo@am__quote@
 798@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_cpp.Plo@am__quote@
 799@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_dlopen.Plo@am__quote@
 800@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gcj_mlc.Plo@am__quote@
 801@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/headers.Plo@am__quote@
 802@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/malloc.Plo@am__quote@
 803@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mallocx.Plo@am__quote@
 804@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark.Plo@am__quote@
 805@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark_rts.Plo@am__quote@
 806@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Plo@am__quote@
 807@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/new_hblk.Plo@am__quote@
 808@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obj_map.Plo@am__quote@
 809@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_dep.Plo@am__quote@
 810@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcr_interface.Plo@am__quote@
 811@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pthread_stop_world.Plo@am__quote@
 812@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pthread_support.Plo@am__quote@
 813@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptr_chck.Plo@am__quote@
 814@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/real_malloc.Plo@am__quote@
 815@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reclaim.Plo@am__quote@
 816@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/specific.Plo@am__quote@
 817@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stubborn.Plo@am__quote@
 818@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/thread_local_alloc.Plo@am__quote@
 819@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/typd_mlc.Plo@am__quote@
 820@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/win32_threads.Plo@am__quote@
 821@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordbscs.Plo@am__quote@
 822@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordprnt.Plo@am__quote@
 823@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordtest.Plo@am__quote@
 824@AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordxtra.Plo@am__quote@
 825@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/huge_test.Po@am__quote@
 826@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/leak_test.Po@am__quote@
 827@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/middle.Po@am__quote@
 828@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/smash_test.Po@am__quote@
 829@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test.Po@am__quote@
 830@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test_cpp.Po@am__quote@
 831@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/thread_leak_test.Po@am__quote@
 832
 833.S.o:
 834	$(CCASCOMPILE) -c $<
 835
 836.S.obj:
 837	$(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`
 838
 839.c.o:
 840@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \
 841@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
 842@am__fastdepCC_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
 843@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 844@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 845@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ $<
 846
 847.c.obj:
 848@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \
 849@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
 850@am__fastdepCC_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
 851@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 852@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 853@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 854
 855.c.lo:
 856@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \
 857@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
 858@am__fastdepCC_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi
 859@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 860@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 861@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 862
 863.cc.o:
 864@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \
 865@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
 866@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
 867@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 868@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 869@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 870
 871.cc.obj:
 872@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \
 873@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
 874@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi
 875@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 876@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 877@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 878
 879.cc.lo:
 880@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \
 881@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \
 882@am__fastdepCXX_TRUE@	then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi
 883@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 884@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 885@am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
 886
 887.s.o:
 888	$(CCASCOMPILE) -c $<
 889
 890.s.obj:
 891	$(CCASCOMPILE) -c `$(CYGPATH_W) '$<'`
 892
 893mostlyclean-libtool:
 894	-rm -f *.lo
 895
 896clean-libtool:
 897	-rm -rf .libs _libs
 898	-rm -rf cord/.libs cord/_libs
 899
 900distclean-libtool:
 901	-rm -f libtool
 902uninstall-info-am:
 903install-dist_pkgconfigDATA: $(dist_pkgconfig_DATA)
 904	@$(NORMAL_INSTALL)
 905	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
 906	@list='$(dist_pkgconfig_DATA)'; for p in $$list; do \
 907	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 908	  f=$(am__strip_dir) \
 909	  echo " $(dist_pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
 910	  $(dist_pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
 911	done
 912
 913uninstall-dist_pkgconfigDATA:
 914	@$(NORMAL_UNINSTALL)
 915	@list='$(dist_pkgconfig_DATA)'; for p in $$list; do \
 916	  f=$(am__strip_dir) \
 917	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
 918	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
 919	done
 920install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
 921	@$(NORMAL_INSTALL)
 922	test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
 923	@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
 924	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 925	  f=$(am__strip_dir) \
 926	  echo " $(dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 927	  $(dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
 928	done
 929
 930uninstall-dist_pkgdataDATA:
 931	@$(NORMAL_UNINSTALL)
 932	@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
 933	  f=$(am__strip_dir) \
 934	  echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 935	  rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
 936	done
 937install-includeHEADERS: $(include_HEADERS)
 938	@$(NORMAL_INSTALL)
 939	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
 940	@list='$(include_HEADERS)'; for p in $$list; do \
 941	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 942	  f=$(am__strip_dir) \
 943	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
 944	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
 945	done
 946
 947uninstall-includeHEADERS:
 948	@$(NORMAL_UNINSTALL)
 949	@list='$(include_HEADERS)'; for p in $$list; do \
 950	  f=$(am__strip_dir) \
 951	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
 952	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
 953	done
 954install-pkgincludeHEADERS: $(pkginclude_HEADERS)
 955	@$(NORMAL_INSTALL)
 956	test -z "$(pkgincludedir)" || $(mkdir_p) "$(DESTDIR)$(pkgincludedir)"
 957	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
 958	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 959	  f=$(am__strip_dir) \
 960	  echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
 961	  $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
 962	done
 963
 964uninstall-pkgincludeHEADERS:
 965	@$(NORMAL_UNINSTALL)
 966	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
 967	  f=$(am__strip_dir) \
 968	  echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
 969	  rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
 970	done
 971
 972# This directory's subdirectories are mostly independent; you can cd
 973# into them and run `make' without going through this Makefile.
 974# To change the values of `make' variables: instead of editing Makefiles,
 975# (1) if the variable is set in `config.status', edit `config.status'
 976#     (which will cause the Makefiles to be regenerated when you run `make');
 977# (2) otherwise, pass the desired values on the `make' command line.
 978$(RECURSIVE_TARGETS):
 979	@failcom='exit 1'; \
 980	for f in x $$MAKEFLAGS; do \
 981	  case $$f in \
 982	    *=* | --[!k]*);; \
 983	    *k*) failcom='fail=yes';; \
 984	  esac; \
 985	done; \
 986	dot_seen=no; \
 987	target=`echo $@ | sed s/-recursive//`; \
 988	list='$(SUBDIRS)'; for subdir in $$list; do \
 989	  echo "Making $$target in $$subdir"; \
 990	  if test "$$subdir" = "."; then \
 991	    dot_seen=yes; \
 992	    local_target="$$target-am"; \
 993	  else \
 994	    local_target="$$target"; \
 995	  fi; \
 996	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 997	  || eval $$failcom; \
 998	done; \
 999	if test "$$dot_seen" = "no"; then \
1000	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
1001	fi; test -z "$$fail"
1002
1003mostlyclean-recursive clean-recursive distclean-recursive \
1004maintainer-clean-recursive:
1005	@failcom='exit 1'; \
1006	for f in x $$MAKEFLAGS; do \
1007	  case $$f in \
1008	    *=* | --[!k]*);; \
1009	    *k*) failcom='fail=yes';; \
1010	  esac; \
1011	done; \
1012	dot_seen=no; \
1013	case "$@" in \
1014	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
1015	  *) list='$(SUBDIRS)' ;; \
1016	esac; \
1017	rev=''; for subdir in $$list; do \
1018	  if test "$$subdir" = "."; then :; else \
1019	    rev="$$subdir $$rev"; \
1020	  fi; \
1021	done; \
1022	rev="$$rev ."; \
1023	target=`echo $@ | sed s/-recursive//`; \
1024	for subdir in $$rev; do \
1025	  echo "Making $$target in $$subdir"; \
1026	  if test "$$subdir" = "."; then \
1027	    local_target="$$target-am"; \
1028	  else \
1029	    local_target="$$target"; \
1030	  fi; \
1031	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
1032	  || eval $$failcom; \
1033	done && test -z "$$fail"
1034tags-recursive:
1035	list='$(SUBDIRS)'; for subdir in $$list; do \
1036	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
1037	done
1038ctags-recursive:
1039	list='$(SUBDIRS)'; for subdir in $$list; do \
1040	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
1041	done
1042
1043ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
1044	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1045	unique=`for i in $$list; do \
1046	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1047	  done | \
1048	  $(AWK) '    { files[$$0] = 1; } \
1049	       END { for (i in files) print i; }'`; \
1050	mkid -fID $$unique
1051tags: TAGS
1052
1053TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1054		$(TAGS_FILES) $(LISP)
1055	tags=; \
1056	here=`pwd`; \
1057	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
1058	  include_option=--etags-include; \
1059	  empty_fix=.; \
1060	else \
1061	  include_option=--include; \
1062	  empty_fix=; \
1063	fi; \
1064	list='$(SUBDIRS)'; for subdir in $$list; do \
1065	  if test "$$subdir" = .; then :; else \
1066	    test ! -f $$subdir/TAGS || \
1067	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
1068	  fi; \
1069	done; \
1070	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1071	unique=`for i in $$list; do \
1072	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1073	  done | \
1074	  $(AWK) '    { files[$$0] = 1; } \
1075	       END { for (i in files) print i; }'`; \
1076	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
1077	  test -n "$$unique" || unique=$$empty_fix; \
1078	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1079	    $$tags $$unique; \
1080	fi
1081ctags: CTAGS
1082CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1083		$(TAGS_FILES) $(LISP)
1084	tags=; \
1085	here=`pwd`; \
1086	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1087	unique=`for i in $$list; do \
1088	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1089	  done | \
1090	  $(AWK) '    { files[$$0] = 1; } \
1091	       END { for (i in files) print i; }'`; \
1092	test -z "$(CTAGS_ARGS)$$tags$$unique" \
1093	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
1094	     $$tags $$unique
1095
1096GTAGS:
1097	here=`$(am__cd) $(top_builddir) && pwd` \
1098	  && cd $(top_srcdir) \
1099	  && gtags -i $(GTAGS_ARGS) $$here
1100
1101distclean-tags:
1102	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1103
1104check-TESTS: $(TESTS)
1105	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
1106	srcdir=$(srcdir); export srcdir; \
1107	list='$(TESTS)'; \
1108	if test -n "$$list"; then \
1109	  for tst in $$list; do \
1110	    if test -f ./$$tst; then dir=./; \
1111	    elif test -f $$tst; then dir=; \
1112	    else dir="$(srcdir)/"; fi; \
1113	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
1114	      all=`expr $$all + 1`; \
1115	      case " $(XFAIL_TESTS) " in \
1116	      *" $$tst "*) \
1117		xpass=`expr $$xpass + 1`; \
1118		failed=`expr $$failed + 1`; \
1119		echo "XPASS: $$tst"; \
1120	      ;; \
1121	      *) \
1122		echo "PASS: $$tst"; \
1123	      ;; \
1124	      esac; \
1125	    elif test $$? -ne 77; then \
1126	      all=`expr $$all + 1`; \
1127	      case " $(XFAIL_TESTS) " in \
1128	      *" $$tst "*) \
1129		xfail=`expr $$xfail + 1`; \
1130		echo "XFAIL: $$tst"; \
1131	      ;; \
1132	      *) \
1133		failed=`expr $$failed + 1`; \
1134		echo "FAIL: $$tst"; \
1135	      ;; \
1136	      esac; \
1137	    else \
1138	      skip=`expr $$skip + 1`; \
1139	      echo "SKIP: $$tst"; \
1140	    fi; \
1141	  done; \
1142	  if test "$$failed" -eq 0; then \
1143	    if test "$$xfail" -eq 0; then \
1144	      banner="All $$all tests passed"; \
1145	    else \
1146	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
1147	    fi; \
1148	  else \
1149	    if test "$$xpass" -eq 0; then \
1150	      banner="$$failed of $$all tests failed"; \
1151	    else \
1152	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
1153	    fi; \
1154	  fi; \
1155	  dashes="$$banner"; \
1156	  skipped=""; \
1157	  if test "$$skip" -ne 0; then \
1158	    skipped="($$skip tests were not run)"; \
1159	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
1160	      dashes="$$skipped"; \
1161	  fi; \
1162	  report=""; \
1163	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
1164	    report="Please report to $(PACKAGE_BUGREPORT)"; \
1165	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
1166	      dashes="$$report"; \
1167	  fi; \
1168	  dashes=`echo "$$dashes" | sed s/./=/g`; \
1169	  echo "$$dashes"; \
1170	  echo "$$banner"; \
1171	  test -z "$$skipped" || echo "$$skipped"; \
1172	  test -z "$$report" || echo "$$report"; \
1173	  echo "$$dashes"; \
1174	  test "$$failed" -eq 0; \
1175	else :; fi
1176
1177distdir: $(DISTFILES)
1178	$(am__remove_distdir)
1179	mkdir $(distdir)
1180	$(mkdir_p) $(distdir)/. $(distdir)/Mac_files $(distdir)/cord $(distdir)/doc $(distdir)/include $(distdir)/include/extra $(distdir)/include/private $(distdir)/tests
1181	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
1182	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
1183	list='$(DISTFILES)'; for file in $$list; do \
1184	  case $$file in \
1185	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
1186	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
1187	  esac; \
1188	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1189	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
1190	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
1191	    dir="/$$dir"; \
1192	    $(mkdir_p) "$(distdir)$$dir"; \
1193	  else \
1194	    dir=''; \
1195	  fi; \
1196	  if test -d $$d/$$file; then \
1197	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1198	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
1199	    fi; \
1200	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
1201	  else \
1202	    test -f $(distdir)/$$file \
1203	    || cp -p $$d/$$file $(distdir)/$$file \
1204	    || exit 1; \
1205	  fi; \
1206	done
1207	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1208	  if test "$$subdir" = .; then :; else \
1209	    test -d "$(distdir)/$$subdir" \
1210	    || $(mkdir_p) "$(distdir)/$$subdir" \
1211	    || exit 1; \
1212	    distdir=`$(am__cd) $(distdir) && pwd`; \
1213	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
1214	    (cd $$subdir && \
1215	      $(MAKE) $(AM_MAKEFLAGS) \
1216	        top_distdir="$$top_distdir" \
1217	        distdir="$$distdir/$$subdir" \
1218	        distdir) \
1219	      || exit 1; \
1220	  fi; \
1221	done
1222	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
1223	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1224	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1225	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
1226	|| chmod -R a+r $(distdir)
1227dist-gzip: distdir
1228	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1229	$(am__remove_distdir)
1230dist-bzip2: distdir
1231	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
1232	$(am__remove_distdir)
1233
1234dist-tarZ: distdir
1235	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1236	$(am__remove_distdir)
1237
1238dist-shar: distdir
1239	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1240	$(am__remove_distdir)
1241
1242dist-zip: distdir
1243	-rm -f $(distdir).zip
1244	zip -rq $(distdir).zip $(distdir)
1245	$(am__remove_distdir)
1246
1247dist dist-all: distdir
1248	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1249	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
1250	$(am__remove_distdir)
1251
1252# This target untars the dist file and tries a VPATH configuration.  Then
1253# it guarantees that the distribution is self-contained by making another
1254# tarfile.
1255distcheck: dist
1256	case '$(DIST_ARCHIVES)' in \
1257	*.tar.gz*) \
1258	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
1259	*.tar.bz2*) \
1260	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
1261	*.tar.Z*) \
1262	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1263	*.shar.gz*) \
1264	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
1265	*.zip*) \
1266	  unzip $(distdir).zip ;;\
1267	esac
1268	chmod -R a-w $(distdir); chmod a+w $(distdir)
1269	mkdir $(distdir)/_build
1270	mkdir $(distdir)/_inst
1271	chmod a-w $(distdir)
1272	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1273	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1274	  && cd $(distdir)/_build \
1275	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
1276	    $(DISTCHECK_CONFIGURE_FLAGS) \
1277	  && $(MAKE) $(AM_MAKEFLAGS) \
1278	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
1279	  && $(MAKE) $(AM_MAKEFLAGS) check \
1280	  && $(MAKE) $(AM_MAKEFLAGS) install \
1281	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1282	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1283	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1284	        distuninstallcheck \
1285	  && chmod -R a-w "$$dc_install_base" \
1286	  && ({ \
1287	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1288	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1289	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1290	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1291	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1292	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
1293	  && rm -rf "$$dc_destdir" \
1294	  && $(MAKE) $(AM_MAKEFLAGS) dist \
1295	  && rm -rf $(DIST_ARCHIVES) \
1296	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
1297	$(am__remove_distdir)
1298	@(echo "$(distdir) archives ready for distribution: "; \
1299	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1300	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
1301distuninstallcheck:
1302	@cd $(distuninstallcheck_dir) \
1303	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
1304	   || { echo "ERROR: files left after uninstall:" ; \
1305	        if test -n "$(DESTDIR)"; then \
1306	          echo "  (check DESTDIR support)"; \
1307	        fi ; \
1308	        $(distuninstallcheck_listfiles) ; \
1309	        exit 1; } >&2
1310distcleancheck: distclean
1311	@if test '$(srcdir)' = . ; then \
1312	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1313	  exit 1 ; \
1314	fi
1315	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1316	  || { echo "ERROR: files left in build directory after distclean:" ; \
1317	       $(distcleancheck_listfiles) ; \
1318	       exit 1; } >&2
1319check-am: all-am
1320	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
1321	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
1322check: check-recursive
1323all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(DATA) $(HEADERS)
1324installdirs: installdirs-recursive
1325installdirs-am:
1326	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(pkgincludedir)"; do \
1327	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
1328	done
1329install: install-recursive
1330install-exec: install-exec-recursive
1331install-data: install-data-recursive
1332uninstall: uninstall-recursive
1333
1334install-am: all-am
1335	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1336
1337installcheck: installcheck-recursive
1338install-strip:
1339	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1340	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1341	  `test -z '$(STRIP)' || \
1342	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
1343mostlyclean-generic:
1344
1345clean-generic:
1346
1347distclean-generic:
1348	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1349	-rm -f ./$(am__dirstamp)
1350	-rm -f cord/$(DEPDIR)/$(am__dirstamp)
1351	-rm -f cord/$(am__dirstamp)
1352	-rm -f tests/$(DEPDIR)/$(am__dirstamp)
1353	-rm -f tests/$(am__dirstamp)
1354	-test -z "$(DEPDIR)/$(am__dirstamp)" || rm -f $(DEPDIR)/$(am__dirstamp)
1355
1356maintainer-clean-generic:
1357	@echo "This command is intended for maintainers to use"
1358	@echo "it deletes files that may require special tools to rebuild."
1359clean: clean-recursive
1360
1361clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
1362	clean-libtool mostlyclean-am
1363
1364distclean: distclean-recursive
1365	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1366	-rm -rf ./$(DEPDIR) cord/$(DEPDIR) tests/$(DEPDIR)
1367	-rm -f Makefile
1368distclean-am: clean-am distclean-compile distclean-generic \
1369	distclean-libtool distclean-tags
1370
1371dvi: dvi-recursive
1372
1373dvi-am:
1374
1375html: html-recursive
1376
1377info: info-recursive
1378
1379info-am:
1380
1381install-data-am: install-dist_pkgconfigDATA install-dist_pkgdataDATA \
1382	install-includeHEADERS install-pkgincludeHEADERS
1383
1384install-exec-am: install-libLTLIBRARIES
1385
1386install-info: install-info-recursive
1387
1388install-man:
1389
1390installcheck-am:
1391
1392maintainer-clean: maintainer-clean-recursive
1393	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1394	-rm -rf $(top_srcdir)/autom4te.cache
1395	-rm -rf ./$(DEPDIR) cord/$(DEPDIR) tests/$(DEPDIR)
1396	-rm -f Makefile
1397maintainer-clean-am: distclean-am maintainer-clean-generic
1398
1399mostlyclean: mostlyclean-recursive
1400
1401mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1402	mostlyclean-libtool
1403
1404pdf: pdf-recursive
1405
1406pdf-am:
1407
1408ps: ps-recursive
1409
1410ps-am:
1411
1412uninstall-am: uninstall-dist_pkgconfigDATA uninstall-dist_pkgdataDATA \
1413	uninstall-includeHEADERS uninstall-info-am \
1414	uninstall-libLTLIBRARIES uninstall-pkgincludeHEADERS
1415
1416uninstall-info: uninstall-info-recursive
1417
1418.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
1419	check-TESTS check-am clean clean-checkPROGRAMS clean-generic \
1420	clean-libLTLIBRARIES clean-libtool clean-recursive ctags \
1421	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
1422	dist-tarZ dist-zip distcheck distclean distclean-compile \
1423	distclean-generic distclean-libtool distclean-recursive \
1424	distclean-tags distcleancheck distdir distuninstallcheck dvi \
1425	dvi-am html html-am info info-am install install-am \
1426	install-data install-data-am install-dist_pkgconfigDATA \
1427	install-dist_pkgdataDATA install-exec install-exec-am \
1428	install-includeHEADERS install-info install-info-am \
1429	install-libLTLIBRARIES install-man install-pkgincludeHEADERS \
1430	install-strip installcheck installcheck-am installdirs \
1431	installdirs-am maintainer-clean maintainer-clean-generic \
1432	maintainer-clean-recursive mostlyclean mostlyclean-compile \
1433	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
1434	pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
1435	uninstall-dist_pkgconfigDATA uninstall-dist_pkgdataDATA \
1436	uninstall-includeHEADERS uninstall-info-am \
1437	uninstall-libLTLIBRARIES uninstall-pkgincludeHEADERS
1438
1439.s.lo:
1440	$(LTCOMPILE) $(ASM_CPP_OPTIONS) -c $<
1441
1442.S.lo:
1443	$(LTCOMPILE) $(ASM_CPP_OPTIONS) -c $<
1444
1445#
1446# :GOTCHA: GNU make rule for making .s out of .S is flawed, 
1447# it will not remove dest if building fails
1448.S.s:
1449	if $(CPP) $< >$@ ; then :; else rm -f $@; fi
1450
1451# Putting these at the top causes cord to be built first, and not find libgc.a
1452# on HP/UX.  There may be a better fix.
1453# Tell versions [3.59,3.63) of GNU make to not export all variables.
1454# Otherwise a system limit (for SysV at least) may be exceeded.
1455.NOEXPORT: