/arch/arm/mach-fsm/board-qsd8x50.c
https://bitbucket.org/sammyz/iscream_thunderc-2.6.35-rebase · C · 2555 lines · 2175 code · 321 blank · 59 comment · 147 complexity · 877d604654a65f0f02f6f411d3b4dd5e MD5 · raw file
- /* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
- #include <linux/kernel.h>
- #include <linux/irq.h>
- #include <linux/gpio.h>
- #include <linux/platform_device.h>
- #include <linux/android_pmem.h>
- #include <linux/bootmem.h>
- #include <linux/i2c.h>
- #include <linux/spi/spi.h>
- #include <linux/delay.h>
- #include <linux/mfd/tps65023.h>
- #include <linux/bma150.h>
- #include <linux/power_supply.h>
- #include <linux/clk.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/io.h>
- #include <asm/setup.h>
- #include <asm/mach/mmc.h>
- #include <mach/vreg.h>
- #include <mach/mpp.h>
- #include <mach/gpio.h>
- #include <mach/board.h>
- #include <mach/sirc.h>
- #include <mach/dma.h>
- #include <mach/rpc_hsusb.h>
- #include <mach/rpc_pmapp.h>
- #include <mach/msm_hsusb.h>
- #include <mach/msm_serial_hs.h>
- #include <mach/msm_touchpad.h>
- #include <mach/msm_i2ckbd.h>
- #include <mach/pmic.h>
- #include <mach/camera.h>
- #include <mach/memory.h>
- #include <mach/msm_spi.h>
- #include <mach/msm_tsif.h>
- #include <mach/msm_battery.h>
- #include <mach/rpc_server_handset.h>
- #include "devices.h"
- #include "timer.h"
- #include "socinfo.h"
- #include "msm-keypad-devices.h"
- #include "pm.h"
- #include "proc_comm.h"
- #include <linux/msm_kgsl.h>
- #ifdef CONFIG_USB_ANDROID
- #include <linux/usb/android_composite.h>
- #endif
- #define TOUCHPAD_SUSPEND 34
- #define TOUCHPAD_IRQ 38
- #define MSM_PMEM_SF_SIZE 0x1700000
- #define SMEM_SPINLOCK_I2C "S:6"
- #define MSM_PMEM_ADSP_SIZE 0x2B96000
- #define MSM_FB_SIZE 0x2EE000
- #define MSM_AUDIO_SIZE 0x80000
- #define MSM_GPU_PHYS_SIZE SZ_2M
- #ifdef CONFIG_MSM_SOC_REV_A
- #define MSM_SMI_BASE 0xE0000000
- #else
- #define MSM_SMI_BASE 0x00000000
- #endif
- #define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
- #define MSM_PMEM_SMI_BASE (MSM_SMI_BASE + 0x02B00000)
- #define MSM_PMEM_SMI_SIZE 0x01500000
- #define MSM_FB_BASE MSM_PMEM_SMI_BASE
- #define MSM_GPU_PHYS_BASE (MSM_FB_BASE + MSM_FB_SIZE)
- #define MSM_PMEM_SMIPOOL_BASE (MSM_GPU_PHYS_BASE + MSM_GPU_PHYS_SIZE)
- #define MSM_PMEM_SMIPOOL_SIZE (MSM_PMEM_SMI_SIZE - MSM_FB_SIZE \
- - MSM_GPU_PHYS_SIZE)
- #define PMEM_KERNEL_EBI1_SIZE 0x28000
- #define PMIC_VREG_WLAN_LEVEL 2600
- #define PMIC_VREG_GP6_LEVEL 2900
- #define FPGA_SDCC_STATUS 0x70000280
- static struct resource smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ,
- },
- };
- #ifdef CONFIG_USB_FUNCTION
- static struct usb_mass_storage_platform_data usb_mass_storage_pdata = {
- .nluns = 0x02,
- .buf_size = 16384,
- .vendor = "GOOGLE",
- .product = "Mass storage",
- .release = 0xffff,
- };
- static struct platform_device mass_storage_device = {
- .name = "usb_mass_storage",
- .id = -1,
- .dev = {
- .platform_data = &usb_mass_storage_pdata,
- },
- };
- #endif
- #ifdef CONFIG_USB_ANDROID
- static char *usb_functions_default[] = {
- "diag",
- "modem",
- "nmea",
- "rmnet",
- "usb_mass_storage",
- };
- static char *usb_functions_default_adb[] = {
- "diag",
- "adb",
- "modem",
- "nmea",
- "rmnet",
- "usb_mass_storage",
- };
- static char *usb_functions_rndis[] = {
- "rndis",
- };
- static char *usb_functions_rndis_adb[] = {
- "rndis",
- "adb",
- };
- static char *usb_functions_all[] = {
- #ifdef CONFIG_USB_ANDROID_RNDIS
- "rndis",
- #endif
- #ifdef CONFIG_USB_ANDROID_DIAG
- "diag",
- #endif
- "adb",
- #ifdef CONFIG_USB_F_SERIAL
- "modem",
- "nmea",
- #endif
- #ifdef CONFIG_USB_ANDROID_RMNET
- "rmnet",
- #endif
- "usb_mass_storage",
- #ifdef CONFIG_USB_ANDROID_ACM
- "acm",
- #endif
- };
- static struct android_usb_product usb_products[] = {
- {
- .product_id = 0x9026,
- .num_functions = ARRAY_SIZE(usb_functions_default),
- .functions = usb_functions_default,
- },
- {
- .product_id = 0x9025,
- .num_functions = ARRAY_SIZE(usb_functions_default_adb),
- .functions = usb_functions_default_adb,
- },
- {
- .product_id = 0xf00e,
- .num_functions = ARRAY_SIZE(usb_functions_rndis),
- .functions = usb_functions_rndis,
- },
- {
- .product_id = 0x9024,
- .num_functions = ARRAY_SIZE(usb_functions_rndis_adb),
- .functions = usb_functions_rndis_adb,
- },
- };
- static struct usb_mass_storage_platform_data mass_storage_pdata = {
- .nluns = 1,
- .vendor = "Qualcomm Incorporated",
- .product = "Mass storage",
- .release = 0x0100,
- };
- static struct platform_device usb_mass_storage_device = {
- .name = "usb_mass_storage",
- .id = -1,
- .dev = {
- .platform_data = &mass_storage_pdata,
- },
- };
- static struct usb_ether_platform_data rndis_pdata = {
- /* ethaddr is filled by board_serialno_setup */
- .vendorID = 0x05C6,
- .vendorDescr = "Qualcomm Incorporated",
- };
- static struct platform_device rndis_device = {
- .name = "rndis",
- .id = -1,
- .dev = {
- .platform_data = &rndis_pdata,
- },
- };
- static struct android_usb_platform_data android_usb_pdata = {
- .vendor_id = 0x05C6,
- .product_id = 0x9026,
- .version = 0x0100,
- .product_name = "Qualcomm HSUSB Device",
- .manufacturer_name = "Qualcomm Incorporated",
- .num_products = ARRAY_SIZE(usb_products),
- .products = usb_products,
- .num_functions = ARRAY_SIZE(usb_functions_all),
- .functions = usb_functions_all,
- .serial_number = "1234567890ABCDEF",
- };
- static struct platform_device android_usb_device = {
- .name = "android_usb",
- .id = -1,
- .dev = {
- .platform_data = &android_usb_pdata,
- },
- };
- static int __init board_serialno_setup(char *serialno)
- {
- int i;
- char *src = serialno;
- /* create a fake MAC address from our serial number.
- * first byte is 0x02 to signify locally administered.
- */
- rndis_pdata.ethaddr[0] = 0x02;
- for (i = 0; *src; i++) {
- /* XOR the USB serial across the remaining bytes */
- rndis_pdata.ethaddr[i % (ETH_ALEN - 1) + 1] ^= *src++;
- }
- android_usb_pdata.serial_number = serialno;
- return 1;
- }
- __setup("androidboot.serialno=", board_serialno_setup);
- #endif
- static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
- };
- #ifdef CONFIG_USB_FUNCTION
- static struct usb_function_map usb_functions_map[] = {
- {"diag", 0},
- {"adb", 1},
- {"modem", 2},
- {"nmea", 3},
- {"mass_storage", 4},
- {"ethernet", 5},
- };
- /* dynamic composition */
- static struct usb_composition usb_func_composition[] = {
- {
- .product_id = 0x9012,
- .functions = 0x5, /* 0101 */
- },
- {
- .product_id = 0x9013,
- .functions = 0x15, /* 10101 */
- },
- {
- .product_id = 0x9014,
- .functions = 0x30, /* 110000 */
- },
- {
- .product_id = 0x9015,
- .functions = 0x12, /* 10010 */
- },
- {
- .product_id = 0x9016,
- .functions = 0xD, /* 01101 */
- },
- {
- .product_id = 0x9017,
- .functions = 0x1D, /* 11101 */
- },
- {
- .product_id = 0xF000,
- .functions = 0x10, /* 10000 */
- },
- {
- .product_id = 0xF009,
- .functions = 0x20, /* 100000 */
- },
- {
- .product_id = 0x9018,
- .functions = 0x1F, /* 011111 */
- },
- {
- .product_id = 0x901A,
- .functions = 0x0F, /* 01111 */
- },
- };
- #endif
- static struct msm_handset_platform_data hs_platform_data = {
- .hs_name = "8k_handset",
- .pwr_key_delay_ms = 500, /* 0 will disable end key */
- };
- static struct platform_device hs_device = {
- .name = "msm-handset",
- .id = -1,
- .dev = {
- .platform_data = &hs_platform_data,
- },
- };
- #ifdef CONFIG_USB_FS_HOST
- static struct msm_gpio fsusb_config[] = {
- { GPIO_CFG(139, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "fs_dat" },
- { GPIO_CFG(140, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "fs_se0" },
- { GPIO_CFG(141, 3, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "fs_oe_n" },
- };
- static int fsusb_gpio_init(void)
- {
- return msm_gpios_request(fsusb_config, ARRAY_SIZE(fsusb_config));
- }
- static void msm_fsusb_setup_gpio(unsigned int enable)
- {
- if (enable)
- msm_gpios_enable(fsusb_config, ARRAY_SIZE(fsusb_config));
- else
- msm_gpios_disable(fsusb_config, ARRAY_SIZE(fsusb_config));
- }
- #endif
- #define MSM_USB_BASE ((unsigned)addr)
- static struct msm_hsusb_platform_data msm_hsusb_pdata = {
- #ifdef CONFIG_USB_FUNCTION
- .version = 0x0100,
- .phy_info = (USB_PHY_INTEGRATED | USB_PHY_MODEL_180NM),
- .vendor_id = 0x5c6,
- .product_name = "Qualcomm HSUSB Device",
- .serial_number = "1234567890ABCDEF",
- .manufacturer_name = "Qualcomm Incorporated",
- .compositions = usb_func_composition,
- .num_compositions = ARRAY_SIZE(usb_func_composition),
- .function_map = usb_functions_map,
- .num_functions = ARRAY_SIZE(usb_functions_map),
- .config_gpio = NULL,
- #endif
- };
- static struct vreg *vreg_usb;
- static void msm_hsusb_vbus_power(unsigned phy_info, int on)
- {
- switch (PHY_TYPE(phy_info)) {
- case USB_PHY_INTEGRATED:
- if (on)
- msm_hsusb_vbus_powerup();
- else
- msm_hsusb_vbus_shutdown();
- break;
- case USB_PHY_SERIAL_PMIC:
- if (on)
- vreg_enable(vreg_usb);
- else
- vreg_disable(vreg_usb);
- break;
- default:
- pr_err("%s: undefined phy type ( %X ) \n", __func__,
- phy_info);
- }
- }
- static struct msm_usb_host_platform_data msm_usb_host_pdata = {
- .phy_info = (USB_PHY_INTEGRATED | USB_PHY_MODEL_180NM),
- };
- #ifdef CONFIG_USB_FS_HOST
- static struct msm_usb_host_platform_data msm_usb_host2_pdata = {
- .phy_info = USB_PHY_SERIAL_PMIC,
- .config_gpio = msm_fsusb_setup_gpio,
- .vbus_power = msm_hsusb_vbus_power,
- };
- #endif
- static struct android_pmem_platform_data android_pmem_kernel_ebi1_pdata = {
- .name = PMEM_KERNEL_EBI1_DATA_NAME,
- /* if no allocator_type, defaults to PMEM_ALLOCATORTYPE_BITMAP,
- * the only valid choice at this time. The board structure is
- * set to all zeros by the C runtime initialization and that is now
- * the enum value of PMEM_ALLOCATORTYPE_BITMAP, now forced to 0 in
- * include/linux/android_pmem.h.
- */
- .cached = 0,
- };
- #ifdef CONFIG_KERNEL_PMEM_SMI_REGION
- static struct android_pmem_platform_data android_pmem_kernel_smi_pdata = {
- .name = PMEM_KERNEL_SMI_DATA_NAME,
- /* if no allocator_type, defaults to PMEM_ALLOCATORTYPE_BITMAP,
- * the only valid choice at this time. The board structure is
- * set to all zeros by the C runtime initialization and that is now
- * the enum value of PMEM_ALLOCATORTYPE_BITMAP, now forced to 0 in
- * include/linux/android_pmem.h.
- */
- .cached = 0,
- };
- #endif
- static struct android_pmem_platform_data android_pmem_pdata = {
- .name = "pmem",
- .allocator_type = PMEM_ALLOCATORTYPE_ALLORNOTHING,
- .cached = 1,
- };
- static struct android_pmem_platform_data android_pmem_adsp_pdata = {
- .name = "pmem_adsp",
- .allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
- .cached = 0,
- };
- static struct android_pmem_platform_data android_pmem_smipool_pdata = {
- .name = "pmem_smipool",
- .start = MSM_PMEM_SMIPOOL_BASE,
- .size = MSM_PMEM_SMIPOOL_SIZE,
- .allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
- .cached = 0,
- };
- static struct platform_device android_pmem_device = {
- .name = "android_pmem",
- .id = 0,
- .dev = { .platform_data = &android_pmem_pdata },
- };
- static struct platform_device android_pmem_adsp_device = {
- .name = "android_pmem",
- .id = 1,
- .dev = { .platform_data = &android_pmem_adsp_pdata },
- };
- static struct platform_device android_pmem_smipool_device = {
- .name = "android_pmem",
- .id = 2,
- .dev = { .platform_data = &android_pmem_smipool_pdata },
- };
- static struct platform_device android_pmem_kernel_ebi1_device = {
- .name = "android_pmem",
- .id = 3,
- .dev = { .platform_data = &android_pmem_kernel_ebi1_pdata },
- };
- #ifdef CONFIG_KERNEL_PMEM_SMI_REGION
- static struct platform_device android_pmem_kernel_smi_device = {
- .name = "android_pmem",
- .id = 4,
- .dev = { .platform_data = &android_pmem_kernel_smi_pdata },
- };
- #endif
- static struct resource msm_fb_resources[] = {
- {
- .flags = IORESOURCE_DMA,
- }
- };
- static int msm_fb_detect_panel(const char *name)
- {
- int ret = -EPERM;
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- if (!strncmp(name, "mddi_toshiba_wvga_pt", 20))
- ret = 0;
- else
- ret = -ENODEV;
- } else if ((machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf())
- && !strcmp(name, "lcdc_external"))
- ret = 0;
- return ret;
- }
- static struct msm_fb_platform_data msm_fb_pdata = {
- .detect_client = msm_fb_detect_panel,
- };
- static struct platform_device msm_fb_device = {
- .name = "msm_fb",
- .id = 0,
- .num_resources = ARRAY_SIZE(msm_fb_resources),
- .resource = msm_fb_resources,
- .dev = {
- .platform_data = &msm_fb_pdata,
- }
- };
- static struct msm_gpio bma_spi_gpio_config_data[] = {
- { GPIO_CFG(22, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "bma_irq" },
- };
- static int msm_bma_gpio_setup(struct device *dev)
- {
- int rc;
- rc = msm_gpios_request_enable(bma_spi_gpio_config_data,
- ARRAY_SIZE(bma_spi_gpio_config_data));
- return rc;
- }
- static void msm_bma_gpio_teardown(struct device *dev)
- {
- msm_gpios_disable_free(bma_spi_gpio_config_data,
- ARRAY_SIZE(bma_spi_gpio_config_data));
- }
- static struct bma150_platform_data bma_pdata = {
- .setup = msm_bma_gpio_setup,
- .teardown = msm_bma_gpio_teardown,
- };
- static struct resource qsd_spi_resources[] = {
- {
- .name = "spi_irq_in",
- .start = INT_SPI_INPUT,
- .end = INT_SPI_INPUT,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "spi_irq_out",
- .start = INT_SPI_OUTPUT,
- .end = INT_SPI_OUTPUT,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "spi_irq_err",
- .start = INT_SPI_ERROR,
- .end = INT_SPI_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "spi_base",
- .start = 0xA1200000,
- .end = 0xA1200000 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "spidm_channels",
- .flags = IORESOURCE_DMA,
- },
- {
- .name = "spidm_crci",
- .flags = IORESOURCE_DMA,
- },
- };
- static struct platform_device qsd_device_spi = {
- .name = "spi_qsd",
- .id = 0,
- .num_resources = ARRAY_SIZE(qsd_spi_resources),
- .resource = qsd_spi_resources,
- };
- static struct spi_board_info msm_spi_board_info[] __initdata = {
- {
- .modalias = "bma150",
- .mode = SPI_MODE_3,
- .irq = MSM_GPIO_TO_INT(22),
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 10000000,
- .platform_data = &bma_pdata,
- },
- };
- #define CT_CSR_PHYS 0xA8700000
- #define TCSR_SPI_MUX (ct_csr_base + 0x54)
- static int msm_qsd_spi_dma_config(void)
- {
- void __iomem *ct_csr_base = 0;
- u32 spi_mux;
- int ret = 0;
- ct_csr_base = ioremap(CT_CSR_PHYS, PAGE_SIZE);
- if (!ct_csr_base) {
- pr_err("%s: Could not remap %x\n", __func__, CT_CSR_PHYS);
- return -1;
- }
- spi_mux = readl(TCSR_SPI_MUX);
- switch (spi_mux) {
- case (1):
- qsd_spi_resources[4].start = DMOV_HSUART1_RX_CHAN;
- qsd_spi_resources[4].end = DMOV_HSUART1_TX_CHAN;
- qsd_spi_resources[5].start = DMOV_HSUART1_RX_CRCI;
- qsd_spi_resources[5].end = DMOV_HSUART1_TX_CRCI;
- break;
- case (2):
- qsd_spi_resources[4].start = DMOV_HSUART2_RX_CHAN;
- qsd_spi_resources[4].end = DMOV_HSUART2_TX_CHAN;
- qsd_spi_resources[5].start = DMOV_HSUART2_RX_CRCI;
- qsd_spi_resources[5].end = DMOV_HSUART2_TX_CRCI;
- break;
- case (3):
- qsd_spi_resources[4].start = DMOV_CE_OUT_CHAN;
- qsd_spi_resources[4].end = DMOV_CE_IN_CHAN;
- qsd_spi_resources[5].start = DMOV_CE_OUT_CRCI;
- qsd_spi_resources[5].end = DMOV_CE_IN_CRCI;
- break;
- default:
- ret = -1;
- }
- iounmap(ct_csr_base);
- return ret;
- }
- static struct msm_gpio qsd_spi_gpio_config_data[] = {
- { GPIO_CFG(17, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "spi_clk" },
- { GPIO_CFG(18, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "spi_mosi" },
- { GPIO_CFG(19, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "spi_miso" },
- { GPIO_CFG(20, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), "spi_cs0" },
- { GPIO_CFG(21, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_16MA), "spi_pwr" },
- };
- static int msm_qsd_spi_gpio_config(void)
- {
- int rc;
- rc = msm_gpios_request_enable(qsd_spi_gpio_config_data,
- ARRAY_SIZE(qsd_spi_gpio_config_data));
- if (rc)
- return rc;
- /* Set direction for SPI_PWR */
- gpio_direction_output(21, 1);
- return 0;
- }
- static void msm_qsd_spi_gpio_release(void)
- {
- msm_gpios_disable_free(qsd_spi_gpio_config_data,
- ARRAY_SIZE(qsd_spi_gpio_config_data));
- }
- static struct msm_spi_platform_data qsd_spi_pdata = {
- .max_clock_speed = 19200000,
- .clk_name = "spi_clk",
- .gpio_config = msm_qsd_spi_gpio_config,
- .gpio_release = msm_qsd_spi_gpio_release,
- .dma_config = msm_qsd_spi_dma_config,
- };
- static void __init msm_qsd_spi_init(void)
- {
- qsd_device_spi.dev.platform_data = &qsd_spi_pdata;
- }
- static int mddi_toshiba_pmic_bl(int level)
- {
- int ret = -EPERM;
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- ret = pmic_set_led_intensity(LED_LCD, level);
- if (ret)
- printk(KERN_WARNING "%s: can't set lcd backlight!\n",
- __func__);
- }
- return ret;
- }
- static struct msm_panel_common_pdata mddi_toshiba_pdata = {
- .pmic_backlight = mddi_toshiba_pmic_bl,
- };
- static struct platform_device mddi_toshiba_device = {
- .name = "mddi_toshiba",
- .id = 0,
- .dev = {
- .platform_data = &mddi_toshiba_pdata,
- }
- };
- static void msm_fb_vreg_config(const char *name, int on)
- {
- struct vreg *vreg;
- int ret = 0;
- vreg = vreg_get(NULL, name);
- if (IS_ERR(vreg)) {
- printk(KERN_ERR "%s: vreg_get(%s) failed (%ld)\n",
- __func__, name, PTR_ERR(vreg));
- return;
- }
- ret = (on) ? vreg_enable(vreg) : vreg_disable(vreg);
- if (ret)
- printk(KERN_ERR "%s: %s(%s) failed!\n",
- __func__, (on) ? "vreg_enable" : "vreg_disable", name);
- }
- #define MDDI_RST_OUT_GPIO 100
- static int mddi_power_save_on;
- static int msm_fb_mddi_power_save(int on)
- {
- int flag_on = !!on;
- int ret = 0;
- if (mddi_power_save_on == flag_on)
- return ret;
- mddi_power_save_on = flag_on;
- if (!flag_on && (machine_is_qsd8x50_ffa()
- || machine_is_qsd8x50a_ffa())) {
- gpio_set_value(MDDI_RST_OUT_GPIO, 0);
- mdelay(1);
- }
- ret = pmic_lp_mode_control(flag_on ? OFF_CMD : ON_CMD,
- PM_VREG_LP_MSME2_ID);
- if (ret)
- printk(KERN_ERR "%s: pmic_lp_mode_control failed!\n", __func__);
- msm_fb_vreg_config("gp5", flag_on);
- msm_fb_vreg_config("boost", flag_on);
- if (flag_on && (machine_is_qsd8x50_ffa()
- || machine_is_qsd8x50a_ffa())) {
- gpio_set_value(MDDI_RST_OUT_GPIO, 0);
- mdelay(1);
- gpio_set_value(MDDI_RST_OUT_GPIO, 1);
- gpio_set_value(MDDI_RST_OUT_GPIO, 1);
- mdelay(1);
- }
- return ret;
- }
- static int msm_fb_mddi_sel_clk(u32 *clk_rate)
- {
- *clk_rate *= 2;
- return 0;
- }
- static struct mddi_platform_data mddi_pdata = {
- .mddi_power_save = msm_fb_mddi_power_save,
- .mddi_sel_clk = msm_fb_mddi_sel_clk,
- };
- static struct msm_panel_common_pdata mdp_pdata = {
- .gpio = 98,
- };
- static void __init msm_fb_add_devices(void)
- {
- msm_fb_register_device("mdp", &mdp_pdata);
- msm_fb_register_device("pmdh", &mddi_pdata);
- msm_fb_register_device("emdh", &mddi_pdata);
- msm_fb_register_device("tvenc", 0);
- msm_fb_register_device("lcdc", 0);
- }
- static struct resource msm_audio_resources[] = {
- {
- .flags = IORESOURCE_DMA,
- },
- {
- .name = "aux_pcm_dout",
- .start = 68,
- .end = 68,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "aux_pcm_din",
- .start = 69,
- .end = 69,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "aux_pcm_syncout",
- .start = 70,
- .end = 70,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "aux_pcm_clkin_a",
- .start = 71,
- .end = 71,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "sdac_din",
- .start = 144,
- .end = 144,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "sdac_dout",
- .start = 145,
- .end = 145,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "sdac_wsout",
- .start = 143,
- .end = 143,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "cc_i2s_clk",
- .start = 142,
- .end = 142,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "audio_master_clkout",
- .start = 146,
- .end = 146,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "audio_base_addr",
- .start = 0xa0700000,
- .end = 0xa0700000 + 4,
- .flags = IORESOURCE_MEM,
- },
- };
- static unsigned audio_gpio_on[] = {
- GPIO_CFG(68, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* PCM_DOUT */
- GPIO_CFG(69, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* PCM_DIN */
- GPIO_CFG(70, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* PCM_SYNC */
- GPIO_CFG(71, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* PCM_CLK */
- GPIO_CFG(142, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* CC_I2S_CLK */
- GPIO_CFG(143, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* SADC_WSOUT */
- GPIO_CFG(144, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* SADC_DIN */
- GPIO_CFG(145, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* SDAC_DOUT */
- GPIO_CFG(146, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* MA_CLK_OUT */
- };
- static void __init audio_gpio_init(void)
- {
- int pin, rc;
- for (pin = 0; pin < ARRAY_SIZE(audio_gpio_on); pin++) {
- rc = gpio_tlmm_config(audio_gpio_on[pin],
- GPIO_CFG_ENABLE);
- if (rc) {
- printk(KERN_ERR
- "%s: gpio_tlmm_config(%#x)=%d\n",
- __func__, audio_gpio_on[pin], rc);
- return;
- }
- }
- }
- static struct platform_device msm_audio_device = {
- .name = "msm_audio",
- .id = 0,
- .num_resources = ARRAY_SIZE(msm_audio_resources),
- .resource = msm_audio_resources,
- };
- static struct resource bluesleep_resources[] = {
- {
- .name = "gpio_host_wake",
- .start = 21,
- .end = 21,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "gpio_ext_wake",
- .start = 19,
- .end = 19,
- .flags = IORESOURCE_IO,
- },
- {
- .name = "host_wake",
- .start = MSM_GPIO_TO_INT(21),
- .end = MSM_GPIO_TO_INT(21),
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct platform_device msm_bluesleep_device = {
- .name = "bluesleep",
- .id = -1,
- .num_resources = ARRAY_SIZE(bluesleep_resources),
- .resource = bluesleep_resources,
- };
- #ifdef CONFIG_BT
- static struct platform_device msm_bt_power_device = {
- .name = "bt_power",
- };
- enum {
- BT_SYSRST,
- BT_WAKE,
- BT_HOST_WAKE,
- BT_VDD_IO,
- BT_RFR,
- BT_CTS,
- BT_RX,
- BT_TX,
- BT_VDD_FREG
- };
- static struct msm_gpio bt_config_power_off[] = {
- { GPIO_CFG(18, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "BT SYSRST" },
- { GPIO_CFG(19, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "BT WAKE" },
- { GPIO_CFG(21, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "HOST WAKE" },
- { GPIO_CFG(22, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "BT VDD_IO" },
- { GPIO_CFG(43, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "UART1DM_RFR" },
- { GPIO_CFG(44, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "UART1DM_CTS" },
- { GPIO_CFG(45, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "UART1DM_RX" },
- { GPIO_CFG(46, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "UART1DM_TX" }
- };
- static struct msm_gpio bt_config_power_on[] = {
- { GPIO_CFG(18, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "BT SYSRST" },
- { GPIO_CFG(19, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "BT WAKE" },
- { GPIO_CFG(21, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "HOST WAKE" },
- { GPIO_CFG(22, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "BT VDD_IO" },
- { GPIO_CFG(43, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "UART1DM_RFR" },
- { GPIO_CFG(44, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "UART1DM_CTS" },
- { GPIO_CFG(45, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "UART1DM_RX" },
- { GPIO_CFG(46, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "UART1DM_TX" }
- };
- static struct msm_gpio wlan_config_power_off[] = {
- { GPIO_CFG(62, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "SDC2_CLK" },
- { GPIO_CFG(63, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "SDC2_CMD" },
- { GPIO_CFG(64, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "SDC2_D3" },
- { GPIO_CFG(65, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "SDC2_D2" },
- { GPIO_CFG(66, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "SDC2_D1" },
- { GPIO_CFG(67, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "SDC2_D0" },
- { GPIO_CFG(113, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "VDD_WLAN" },
- { GPIO_CFG(138, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- "WLAN_PWD" }
- };
- static struct msm_gpio wlan_config_power_on[] = {
- { GPIO_CFG(62, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "SDC2_CLK" },
- { GPIO_CFG(63, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "SDC2_CMD" },
- { GPIO_CFG(64, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "SDC2_D3" },
- { GPIO_CFG(65, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "SDC2_D2" },
- { GPIO_CFG(66, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "SDC2_D1" },
- { GPIO_CFG(67, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "SDC2_D0" },
- { GPIO_CFG(113, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "VDD_WLAN" },
- { GPIO_CFG(138, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- "WLAN_PWD" }
- };
- static int bluetooth_power(int on)
- {
- int rc;
- struct vreg *vreg_wlan;
- vreg_wlan = vreg_get(NULL, "wlan");
- if (IS_ERR(vreg_wlan)) {
- printk(KERN_ERR "%s: vreg get failed (%ld)\n",
- __func__, PTR_ERR(vreg_wlan));
- return PTR_ERR(vreg_wlan);
- }
- if (on) {
- /* units of mV, steps of 50 mV */
- rc = vreg_set_level(vreg_wlan, PMIC_VREG_WLAN_LEVEL);
- if (rc) {
- printk(KERN_ERR "%s: vreg wlan set level failed (%d)\n",
- __func__, rc);
- return -EIO;
- }
- rc = vreg_enable(vreg_wlan);
- if (rc) {
- printk(KERN_ERR "%s: vreg wlan enable failed (%d)\n",
- __func__, rc);
- return -EIO;
- }
- rc = msm_gpios_enable(bt_config_power_on,
- ARRAY_SIZE(bt_config_power_on));
- if (rc < 0) {
- printk(KERN_ERR
- "%s: bt power on gpio config failed: %d\n",
- __func__, rc);
- return rc;
- }
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- rc = msm_gpios_enable
- (wlan_config_power_on,
- ARRAY_SIZE(wlan_config_power_on));
- if (rc < 0) {
- printk
- (KERN_ERR
- "%s: wlan power on gpio config failed: %d\n",
- __func__, rc);
- return rc;
- }
- }
- gpio_set_value(22, on); /* VDD_IO */
- gpio_set_value(18, on); /* SYSRST */
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- gpio_set_value(138, 0); /* WLAN: CHIP_PWD */
- gpio_set_value(113, on); /* WLAN */
- }
- } else {
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- gpio_set_value(138, on); /* WLAN: CHIP_PWD */
- gpio_set_value(113, on); /* WLAN */
- }
- gpio_set_value(18, on); /* SYSRST */
- gpio_set_value(22, on); /* VDD_IO */
- rc = vreg_disable(vreg_wlan);
- if (rc) {
- printk(KERN_ERR "%s: vreg wlan disable failed (%d)\n",
- __func__, rc);
- return -EIO;
- }
- rc = msm_gpios_enable(bt_config_power_off,
- ARRAY_SIZE(bt_config_power_off));
- if (rc < 0) {
- printk(KERN_ERR
- "%s: bt power off gpio config failed: %d\n",
- __func__, rc);
- return rc;
- }
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- rc = msm_gpios_enable
- (wlan_config_power_off,
- ARRAY_SIZE(wlan_config_power_off));
- if (rc < 0) {
- printk
- (KERN_ERR
- "%s: wlan power off gpio config failed: %d\n",
- __func__, rc);
- return rc;
- }
- }
- }
- printk(KERN_DEBUG "Bluetooth power switch: %d\n", on);
- return 0;
- }
- static void __init bt_power_init(void)
- {
- struct vreg *vreg_bt;
- int rc;
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- gpio_set_value(138, 0); /* WLAN: CHIP_PWD */
- gpio_set_value(113, 0); /* WLAN */
- }
- gpio_set_value(18, 0); /* SYSRST */
- gpio_set_value(22, 0); /* VDD_IO */
- /* do not have vreg bt defined, gp6 is the same */
- /* vreg_get parameter 1 (struct device *) is ignored */
- vreg_bt = vreg_get(NULL, "gp6");
- if (IS_ERR(vreg_bt)) {
- printk(KERN_ERR "%s: vreg get failed (%ld)\n",
- __func__, PTR_ERR(vreg_bt));
- goto exit;
- }
- /* units of mV, steps of 50 mV */
- rc = vreg_set_level(vreg_bt, PMIC_VREG_GP6_LEVEL);
- if (rc) {
- printk(KERN_ERR "%s: vreg bt set level failed (%d)\n",
- __func__, rc);
- goto exit;
- }
- rc = vreg_enable(vreg_bt);
- if (rc) {
- printk(KERN_ERR "%s: vreg bt enable failed (%d)\n",
- __func__, rc);
- goto exit;
- }
- if (bluetooth_power(0))
- goto exit;
- msm_bt_power_device.dev.platform_data = &bluetooth_power;
- printk(KERN_DEBUG "Bluetooth power switch: initialized\n");
- exit:
- return;
- }
- #else
- #define bt_power_init(x) do {} while (0)
- #endif
- static struct resource kgsl_resources[] = {
- {
- .name = "kgsl_reg_memory",
- .start = 0xA0000000,
- .end = 0xA001ffff,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "kgsl_phys_memory",
- .start = MSM_GPU_PHYS_BASE,
- .end = MSM_GPU_PHYS_BASE + MSM_GPU_PHYS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "kgsl_yamato_irq",
- .start = INT_GRAPHICS,
- .end = INT_GRAPHICS,
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct kgsl_platform_data kgsl_pdata = {
- .high_axi_3d = 128000, /* Max for 8K */
- .max_grp2d_freq = 0,
- .min_grp2d_freq = 0,
- .set_grp2d_async = NULL,
- .max_grp3d_freq = 0,
- .min_grp3d_freq = 0,
- .set_grp3d_async = NULL,
- .imem_clk_name = "imem_clk",
- .grp3d_clk_name = "grp_clk",
- .grp2d_clk_name = NULL,
- };
- static struct platform_device msm_device_kgsl = {
- .name = "kgsl",
- .id = -1,
- .num_resources = ARRAY_SIZE(kgsl_resources),
- .resource = kgsl_resources,
- .dev = {
- .platform_data = &kgsl_pdata,
- },
- };
- static struct platform_device msm_device_pmic_leds = {
- .name = "pmic-leds",
- .id = -1,
- };
- /* TSIF begin */
- #if defined(CONFIG_TSIF) || defined(CONFIG_TSIF_MODULE)
- #define TSIF_A_SYNC GPIO_CFG(106, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
- #define TSIF_A_DATA GPIO_CFG(107, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
- #define TSIF_A_EN GPIO_CFG(108, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
- #define TSIF_A_CLK GPIO_CFG(109, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
- static const struct msm_gpio tsif_gpios[] = {
- { .gpio_cfg = TSIF_A_CLK, .label = "tsif_clk", },
- { .gpio_cfg = TSIF_A_EN, .label = "tsif_en", },
- { .gpio_cfg = TSIF_A_DATA, .label = "tsif_data", },
- { .gpio_cfg = TSIF_A_SYNC, .label = "tsif_sync", },
- };
- static struct msm_tsif_platform_data tsif_platform_data = {
- .num_gpios = ARRAY_SIZE(tsif_gpios),
- .gpios = tsif_gpios,
- .tsif_clk = "tsif_clk",
- .tsif_ref_clk = "tsif_ref_clk",
- };
- #endif /* defined(CONFIG_TSIF) || defined(CONFIG_TSIF_MODULE) */
- /* TSIF end */
- #ifdef CONFIG_QSD_SVS
- #define TPS65023_MAX_DCDC1 1600
- #else
- #define TPS65023_MAX_DCDC1 CONFIG_QSD_PMIC_DEFAULT_DCDC1
- #endif
- static int qsd8x50_tps65023_set_dcdc1(int mVolts)
- {
- int rc = 0;
- #ifdef CONFIG_QSD_SVS
- rc = tps65023_set_dcdc1_level(mVolts);
- /* By default the TPS65023 will be initialized to 1.225V.
- * So we can safely switch to any frequency within this
- * voltage even if the device is not probed/ready.
- */
- if (rc == -ENODEV && mVolts <= CONFIG_QSD_PMIC_DEFAULT_DCDC1)
- rc = 0;
- #else
- /* Disallow frequencies not supported in the default PMIC
- * output voltage.
- */
- if (mVolts > CONFIG_QSD_PMIC_DEFAULT_DCDC1)
- rc = -EFAULT;
- #endif
- return rc;
- }
- static struct msm_acpu_clock_platform_data qsd8x50_clock_data = {
- .acpu_switch_time_us = 20,
- .max_speed_delta_khz = 256000,
- .vdd_switch_time_us = 62,
- .max_vdd = TPS65023_MAX_DCDC1,
- .acpu_set_vdd = qsd8x50_tps65023_set_dcdc1,
- };
- static void touchpad_gpio_release(void)
- {
- gpio_free(TOUCHPAD_IRQ);
- gpio_free(TOUCHPAD_SUSPEND);
- }
- static int touchpad_gpio_setup(void)
- {
- int rc;
- int suspend_pin = TOUCHPAD_SUSPEND;
- int irq_pin = TOUCHPAD_IRQ;
- unsigned suspend_cfg =
- GPIO_CFG(suspend_pin, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA);
- unsigned irq_cfg =
- GPIO_CFG(irq_pin, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA);
- rc = gpio_request(irq_pin, "msm_touchpad_irq");
- if (rc) {
- pr_err("gpio_request failed on pin %d (rc=%d)\n",
- irq_pin, rc);
- goto err_gpioconfig;
- }
- rc = gpio_request(suspend_pin, "msm_touchpad_suspend");
- if (rc) {
- pr_err("gpio_request failed on pin %d (rc=%d)\n",
- suspend_pin, rc);
- goto err_gpioconfig;
- }
- rc = gpio_tlmm_config(suspend_cfg, GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("gpio_tlmm_config failed on pin %d (rc=%d)\n",
- suspend_pin, rc);
- goto err_gpioconfig;
- }
- rc = gpio_tlmm_config(irq_cfg, GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("gpio_tlmm_config failed on pin %d (rc=%d)\n",
- irq_pin, rc);
- goto err_gpioconfig;
- }
- return rc;
- err_gpioconfig:
- touchpad_gpio_release();
- return rc;
- }
- static struct msm_touchpad_platform_data msm_touchpad_data = {
- .gpioirq = TOUCHPAD_IRQ,
- .gpiosuspend = TOUCHPAD_SUSPEND,
- .gpio_setup = touchpad_gpio_setup,
- .gpio_shutdown = touchpad_gpio_release
- };
- #define KBD_RST 35
- #define KBD_IRQ 36
- static void kbd_gpio_release(void)
- {
- gpio_free(KBD_IRQ);
- gpio_free(KBD_RST);
- }
- static int kbd_gpio_setup(void)
- {
- int rc;
- int respin = KBD_RST;
- int irqpin = KBD_IRQ;
- unsigned rescfg =
- GPIO_CFG(respin, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA);
- unsigned irqcfg =
- GPIO_CFG(irqpin, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA);
- rc = gpio_request(irqpin, "gpio_keybd_irq");
- if (rc) {
- pr_err("gpio_request failed on pin %d (rc=%d)\n",
- irqpin, rc);
- goto err_gpioconfig;
- }
- rc = gpio_request(respin, "gpio_keybd_reset");
- if (rc) {
- pr_err("gpio_request failed on pin %d (rc=%d)\n",
- respin, rc);
- goto err_gpioconfig;
- }
- rc = gpio_tlmm_config(rescfg, GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("gpio_tlmm_config failed on pin %d (rc=%d)\n",
- respin, rc);
- goto err_gpioconfig;
- }
- rc = gpio_tlmm_config(irqcfg, GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("gpio_tlmm_config failed on pin %d (rc=%d)\n",
- irqpin, rc);
- goto err_gpioconfig;
- }
- return rc;
- err_gpioconfig:
- kbd_gpio_release();
- return rc;
- }
- /* use gpio output pin to toggle keyboard external reset pin */
- static void kbd_hwreset(int kbd_mclrpin)
- {
- gpio_direction_output(kbd_mclrpin, 0);
- gpio_direction_output(kbd_mclrpin, 1);
- }
- static struct msm_i2ckbd_platform_data msm_kybd_data = {
- .hwrepeat = 0,
- .scanset1 = 1,
- .gpioreset = KBD_RST,
- .gpioirq = KBD_IRQ,
- .gpio_setup = kbd_gpio_setup,
- .gpio_shutdown = kbd_gpio_release,
- .hw_reset = kbd_hwreset,
- };
- static struct i2c_board_info msm_i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("glidesensor", 0x2A),
- .irq = MSM_GPIO_TO_INT(TOUCHPAD_IRQ),
- .platform_data = &msm_touchpad_data
- },
- {
- I2C_BOARD_INFO("msm-i2ckbd", 0x3A),
- .type = "msm-i2ckbd",
- .irq = MSM_GPIO_TO_INT(KBD_IRQ),
- .platform_data = &msm_kybd_data
- },
- #ifdef CONFIG_MT9D112
- {
- I2C_BOARD_INFO("mt9d112", 0x78 >> 1),
- },
- #endif
- #ifdef CONFIG_S5K3E2FX
- {
- I2C_BOARD_INFO("s5k3e2fx", 0x20 >> 1),
- },
- #endif
- #ifdef CONFIG_MT9P012
- {
- I2C_BOARD_INFO("mt9p012", 0x6C >> 1),
- },
- #endif
- #ifdef CONFIG_MT9P012_KM
- {
- I2C_BOARD_INFO("mt9p012_km", 0x6C >> 2),
- },
- #endif
- #if defined(CONFIG_MT9T013) || defined(CONFIG_SENSORS_MT9T013)
- {
- I2C_BOARD_INFO("mt9t013", 0x6C),
- },
- #endif
- {
- I2C_BOARD_INFO("tps65023", 0x48),
- },
- };
- #ifdef CONFIG_MSM_CAMERA
- static uint32_t camera_off_gpio_table[] = {
- /* parallel CAMERA interfaces */
- GPIO_CFG(0, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT0 */
- GPIO_CFG(1, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT1 */
- GPIO_CFG(2, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT2 */
- GPIO_CFG(3, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT3 */
- GPIO_CFG(4, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT4 */
- GPIO_CFG(5, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT5 */
- GPIO_CFG(6, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT6 */
- GPIO_CFG(7, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT7 */
- GPIO_CFG(8, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT8 */
- GPIO_CFG(9, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT9 */
- GPIO_CFG(10, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT10 */
- GPIO_CFG(11, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT11 */
- GPIO_CFG(12, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* PCLK */
- GPIO_CFG(13, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* HSYNC_IN */
- GPIO_CFG(14, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* VSYNC_IN */
- GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* MCLK */
- };
- static uint32_t camera_on_gpio_table[] = {
- /* parallel CAMERA interfaces */
- GPIO_CFG(0, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT0 */
- GPIO_CFG(1, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT1 */
- GPIO_CFG(2, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT2 */
- GPIO_CFG(3, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT3 */
- GPIO_CFG(4, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT4 */
- GPIO_CFG(5, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT5 */
- GPIO_CFG(6, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT6 */
- GPIO_CFG(7, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT7 */
- GPIO_CFG(8, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT8 */
- GPIO_CFG(9, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT9 */
- GPIO_CFG(10, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT10 */
- GPIO_CFG(11, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* DAT11 */
- GPIO_CFG(12, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* PCLK */
- GPIO_CFG(13, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* HSYNC_IN */
- GPIO_CFG(14, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA), /* VSYNC_IN */
- GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_16MA), /* MCLK */
- };
- static uint32_t camera_on_gpio_ffa_table[] = {
- /* parallel CAMERA interfaces */
- GPIO_CFG(95, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_16MA), /* I2C_SCL */
- GPIO_CFG(96, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_16MA), /* I2C_SDA */
- /* FFA front Sensor Reset */
- GPIO_CFG(137, 1, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_16MA),
- };
- static uint32_t camera_off_gpio_ffa_table[] = {
- /* FFA front Sensor Reset */
- GPIO_CFG(137, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_16MA),
- };
- static void config_gpio_table(uint32_t *table, int len)
- {
- int n, rc;
- for (n = 0; n < len; n++) {
- rc = gpio_tlmm_config(table[n], GPIO_CFG_ENABLE);
- if (rc) {
- printk(KERN_ERR "%s: gpio_tlmm_config(%#x)=%d\n",
- __func__, table[n], rc);
- break;
- }
- }
- }
- static struct vreg *vreg_gp2;
- static struct vreg *vreg_gp3;
- static void msm_camera_vreg_config(int vreg_en)
- {
- int rc;
- if (vreg_gp2 == NULL) {
- vreg_gp2 = vreg_get(NULL, "gp2");
- if (IS_ERR(vreg_gp2)) {
- printk(KERN_ERR "%s: vreg_get(%s) failed (%ld)\n",
- __func__, "gp2", PTR_ERR(vreg_gp2));
- return;
- }
- rc = vreg_set_level(vreg_gp2, 1800);
- if (rc) {
- printk(KERN_ERR "%s: GP2 set_level failed (%d)\n",
- __func__, rc);
- }
- }
- if (vreg_gp3 == NULL) {
- vreg_gp3 = vreg_get(NULL, "gp3");
- if (IS_ERR(vreg_gp3)) {
- printk(KERN_ERR "%s: vreg_get(%s) failed (%ld)\n",
- __func__, "gp3", PTR_ERR(vreg_gp3));
- return;
- }
- rc = vreg_set_level(vreg_gp3, 2800);
- if (rc) {
- printk(KERN_ERR "%s: GP3 set level failed (%d)\n",
- __func__, rc);
- }
- }
- if (vreg_en) {
- rc = vreg_enable(vreg_gp2);
- if (rc) {
- printk(KERN_ERR "%s: GP2 enable failed (%d)\n",
- __func__, rc);
- }
- rc = vreg_enable(vreg_gp3);
- if (rc) {
- printk(KERN_ERR "%s: GP3 enable failed (%d)\n",
- __func__, rc);
- }
- } else {
- rc = vreg_disable(vreg_gp2);
- if (rc) {
- printk(KERN_ERR "%s: GP2 disable failed (%d)\n",
- __func__, rc);
- }
- rc = vreg_disable(vreg_gp3);
- if (rc) {
- printk(KERN_ERR "%s: GP3 disable failed (%d)\n",
- __func__, rc);
- }
- }
- }
- static void config_camera_on_gpios(void)
- {
- int vreg_en = 1;
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- config_gpio_table(camera_on_gpio_ffa_table,
- ARRAY_SIZE(camera_on_gpio_ffa_table));
- msm_camera_vreg_config(vreg_en);
- gpio_set_value(137, 0);
- }
- config_gpio_table(camera_on_gpio_table,
- ARRAY_SIZE(camera_on_gpio_table));
- }
- static void config_camera_off_gpios(void)
- {
- int vreg_en = 0;
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- config_gpio_table(camera_off_gpio_ffa_table,
- ARRAY_SIZE(camera_off_gpio_ffa_table));
- msm_camera_vreg_config(vreg_en);
- }
- config_gpio_table(camera_off_gpio_table,
- ARRAY_SIZE(camera_off_gpio_table));
- }
- static struct resource msm_camera_resources[] = {
- {
- .start = 0xA0F00000,
- .end = 0xA0F00000 + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_VFE,
- .end = INT_VFE,
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct msm_camera_device_platform_data msm_camera_device_data = {
- .camera_gpio_on = config_camera_on_gpios,
- .camera_gpio_off = config_camera_off_gpios,
- .ioext.mdcphy = MSM_MDC_PHYS,
- .ioext.mdcsz = MSM_MDC_SIZE,
- .ioext.appphy = MSM_CLK_CTL_PHYS,
- .ioext.appsz = MSM_CLK_CTL_SIZE,
- };
- static struct msm_camera_sensor_flash_src msm_flash_src = {
- .flash_sr_type = MSM_CAMERA_FLASH_SRC_PMIC,
- ._fsrc.pmic_src.low_current = 30,
- ._fsrc.pmic_src.high_current = 100,
- };
- #ifdef CONFIG_MT9D112
- static struct msm_camera_sensor_flash_data flash_mt9d112 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
- };
- static struct msm_camera_sensor_info msm_camera_sensor_mt9d112_data = {
- .sensor_name = "mt9d112",
- .sensor_reset = 17,
- .sensor_pwd = 85,
- .vcm_pwd = 0,
- .vcm_enable = 0,
- .pdata = &msm_camera_device_data,
- .resource = msm_camera_resources,
- .num_resources = ARRAY_SIZE(msm_camera_resources),
- .flash_data = &flash_mt9d112
- };
- static struct platform_device msm_camera_sensor_mt9d112 = {
- .name = "msm_camera_mt9d112",
- .dev = {
- .platform_data = &msm_camera_sensor_mt9d112_data,
- },
- };
- #endif
- #ifdef CONFIG_S5K3E2FX
- static struct msm_camera_sensor_flash_data flash_s5k3e2fx = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
- };
- static struct msm_camera_sensor_info msm_camera_sensor_s5k3e2fx_data = {
- .sensor_name = "s5k3e2fx",
- .sensor_reset = 17,
- .sensor_pwd = 85,
- /*.vcm_pwd = 31, */ /* CAM1_VCM_EN, enabled in a9 */
- .vcm_enable = 0,
- .pdata = &msm_camera_device_data,
- .resource = msm_camera_resources,
- .num_resources = ARRAY_SIZE(msm_camera_resources),
- .flash_data = &flash_s5k3e2fx
- };
- static struct platform_device msm_camera_sensor_s5k3e2fx = {
- .name = "msm_camera_s5k3e2fx",
- .dev = {
- .platform_data = &msm_camera_sensor_s5k3e2fx_data,
- },
- };
- #endif
- #ifdef CONFIG_MT9P012
- static struct msm_camera_sensor_flash_data flash_mt9p012 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
- };
- static struct msm_camera_sensor_info msm_camera_sensor_mt9p012_data = {
- .sensor_name = "mt9p012",
- .sensor_reset = 17,
- .sensor_pwd = 85,
- .vcm_pwd = 88,
- .vcm_enable = 0,
- .pdata = &msm_camera_device_data,
- .resource = msm_camera_resources,
- .num_resources = ARRAY_SIZE(msm_camera_resources),
- .flash_data = &flash_mt9p012
- };
- static struct platform_device msm_camera_sensor_mt9p012 = {
- .name = "msm_camera_mt9p012",
- .dev = {
- .platform_data = &msm_camera_sensor_mt9p012_data,
- },
- };
- #endif
- #ifdef CONFIG_MT9P012_KM
- static struct msm_camera_sensor_flash_data flash_mt9p012_km = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
- };
- static struct msm_camera_sensor_info msm_camera_sensor_mt9p012_km_data = {
- .sensor_name = "mt9p012_km",
- .sensor_reset = 17,
- .sensor_pwd = 85,
- .vcm_pwd = 88,
- .vcm_enable = 0,
- .pdata = &msm_camera_device_data,
- .resource = msm_camera_resources,
- .num_resources = ARRAY_SIZE(msm_camera_resources),
- .flash_data = &flash_mt9p012_km
- };
- static struct platform_device msm_camera_sensor_mt9p012_km = {
- .name = "msm_camera_mt9p012_km",
- .dev = {
- .platform_data = &msm_camera_sensor_mt9p012_km_data,
- },
- };
- #endif
- #ifdef CONFIG_MT9T013
- static struct msm_camera_sensor_flash_data flash_mt9t013 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src
- };
- static struct msm_camera_sensor_info msm_camera_sensor_mt9t013_data = {
- .sensor_name = "mt9t013",
- .sensor_reset = 17,
- .sensor_pwd = 85,
- .vcm_pwd = 0,
- .vcm_enable = 0,
- .pdata = &msm_camera_device_data,
- .resource = msm_camera_resources,
- .num_resources = ARRAY_SIZE(msm_camera_resources),
- .flash_data = &flash_mt9t013
- };
- static struct platform_device msm_camera_sensor_mt9t013 = {
- .name = "msm_camera_mt9t013",
- .dev = {
- .platform_data = &msm_camera_sensor_mt9t013_data,
- },
- };
- #endif
- #endif /*CONFIG_MSM_CAMERA*/
- static u32 msm_calculate_batt_capacity(u32 current_voltage);
- static struct msm_psy_batt_pdata msm_psy_batt_data = {
- .voltage_min_design = 3200,
- .voltage_max_design = 4200,
- .avail_chg_sources = AC_CHG | USB_CHG ,
- .batt_technology = POWER_SUPPLY_TECHNOLOGY_LION,
- .calculate_capacity = &msm_calculate_batt_capacity,
- };
- static u32 msm_calculate_batt_capacity(u32 current_voltage)
- {
- u32 low_voltage = msm_psy_batt_data.voltage_min_design;
- u32 high_voltage = msm_psy_batt_data.voltage_max_design;
- return (current_voltage - low_voltage) * 100
- / (high_voltage - low_voltage);
- }
- static struct platform_device msm_batt_device = {
- .name = "msm-battery",
- .id = -1,
- .dev.platform_data = &msm_psy_batt_data,
- };
- static int hsusb_rpc_connect(int connect)
- {
- if (connect)
- return msm_hsusb_rpc_connect();
- else
- return msm_hsusb_rpc_close();
- }
- static struct msm_otg_platform_data msm_otg_pdata = {
- .rpc_connect = hsusb_rpc_connect,
- .pmic_notif_init = msm_pm_app_rpc_init,
- .pmic_notif_deinit = msm_pm_app_rpc_deinit,
- .pmic_register_vbus_sn = msm_pm_app_register_vbus_sn,
- .pmic_unregister_vbus_sn = msm_pm_app_unregister_vbus_sn,
- .pmic_enable_ldo = msm_pm_app_enable_usb_ldo,
- .pemp_level = PRE_EMPHASIS_WITH_10_PERCENT,
- .cdr_autoreset = CDR_AUTO_RESET_DEFAULT,
- .drv_ampl = HS_DRV_AMPLITUDE_5_PERCENT,
- .vbus_power = msm_hsusb_vbus_power,
- .chg_vbus_draw = hsusb_chg_vbus_draw,
- .chg_connected = hsusb_chg_connected,
- .chg_init = hsusb_chg_init,
- };
- static struct msm_hsusb_gadget_platform_data msm_gadget_pdata;
- static struct platform_device *early_devices[] __initdata = {
- #ifdef CONFIG_GPIOLIB
- &msm_gpio_devices[0],
- &msm_gpio_devices[1],
- &msm_gpio_devices[2],
- &msm_gpio_devices[3],
- &msm_gpio_devices[4],
- &msm_gpio_devices[5],
- &msm_gpio_devices[6],
- &msm_gpio_devices[7],
- #endif
- };
- static struct platform_device *devices[] __initdata = {
- &msm_fb_device,
- &mddi_toshiba_device,
- &smc91x_device,
- &msm_device_smd,
- &msm_device_dmov,
- &android_pmem_kernel_ebi1_device,
- #ifdef CONFIG_KERNEL_PMEM_SMI_REGION
- &android_pmem_kernel_smi_device,
- #endif
- &android_pmem_device,
- &android_pmem_adsp_device,
- &android_pmem_smipool_device,
- &msm_device_nand,
- &msm_device_i2c,
- &qsd_device_spi,
- #ifdef CONFIG_USB_FUNCTION
- &mass_storage_device,
- #endif
- #ifdef CONFIG_USB_ANDROID
- &usb_mass_storage_device,
- &rndis_device,
- &android_usb_device,
- #endif
- &msm_device_tssc,
- &msm_audio_device,
- &msm_device_uart_dm1,
- &msm_bluesleep_device,
- #ifdef CONFIG_BT
- &msm_bt_power_device,
- #endif
- #if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
- &msm_device_uart3,
- #endif
- &msm_device_pmic_leds,
- &msm_device_kgsl,
- &hs_device,
- #if defined(CONFIG_TSIF) || defined(CONFIG_TSIF_MODULE)
- &msm_device_tsif,
- #endif
- #ifdef CONFIG_MT9T013
- &msm_camera_sensor_mt9t013,
- #endif
- #ifdef CONFIG_MT9D112
- &msm_camera_sensor_mt9d112,
- #endif
- #ifdef CONFIG_S5K3E2FX
- &msm_camera_sensor_s5k3e2fx,
- #endif
- #ifdef CONFIG_MT9P012
- &msm_camera_sensor_mt9p012,
- #endif
- #ifdef CONFIG_MT9P012_KM
- &msm_camera_sensor_mt9p012_km,
- #endif
- &msm_batt_device,
- };
- static void __init qsd8x50_init_irq(void)
- {
- msm_init_irq();
- msm_init_sirc();
- }
- static void kgsl_phys_memory_init(void)
- {
- request_mem_region(kgsl_resources[1].start,
- resource_size(&kgsl_resources[1]), "kgsl");
- }
- static void usb_mpp_init(void)
- {
- unsigned rc;
- unsigned mpp_usb = 20;
- if (machine_is_qsd8x50_ffa()) {
- rc = mpp_config_digital_out(mpp_usb,
- MPP_CFG(MPP_DLOGIC_LVL_VDD,
- MPP_DLOGIC_OUT_CTRL_HIGH));
- if (rc)
- pr_err("%s: configuring mpp pin"
- "to enable 3.3V LDO failed\n", __func__);
- }
- }
- static void __init qsd8x50_init_usb(void)
- {
- usb_mpp_init();
- #ifdef CONFIG_USB_MSM_OTG_72K
- platform_device_register(&msm_device_otg);
- #endif
- #ifdef CONFIG_USB_FUNCTION_MSM_HSUSB
- platform_device_register(&msm_device_hsusb_peripheral);
- #endif
- #ifdef CONFIG_USB_MSM_72K
- platform_device_register(&msm_device_gadget_peripheral);
- #endif
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa())
- return;
- vreg_usb = vreg_get(NULL, "boost");
- if (IS_ERR(vreg_usb)) {
- printk(KERN_ERR "%s: vreg get failed (%ld)\n",
- __func__, PTR_ERR(vreg_usb));
- return;
- }
- platform_device_register(&msm_device_hsusb_otg);
- msm_add_host(0, &msm_usb_host_pdata);
- #ifdef CONFIG_USB_FS_HOST
- if (fsusb_gpio_init())
- return;
- msm_add_host(1, &msm_usb_host2_pdata);
- #endif
- }
- static struct vreg *vreg_mmc;
- #if (defined(CONFIG_MMC_MSM_SDC1_SUPPORT)\
- || defined(CONFIG_MMC_MSM_SDC2_SUPPORT)\
- || defined(CONFIG_MMC_MSM_SDC3_SUPPORT)\
- || defined(CONFIG_MMC_MSM_SDC4_SUPPORT))
- struct sdcc_gpio {
- struct msm_gpio *cfg_data;
- uint32_t size;
- };
- static struct msm_gpio sdc1_cfg_data[] = {
- {GPIO_CFG(51, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc1_dat_3"},
- {GPIO_CFG(52, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc1_dat_2"},
- {GPIO_CFG(53, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc1_dat_1"},
- {GPIO_CFG(54, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc1_dat_0"},
- {GPIO_CFG(55, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc1_cmd"},
- {GPIO_CFG(56, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), "sdc1_clk"},
- };
- static struct msm_gpio sdc2_cfg_data[] = {
- {GPIO_CFG(62, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), "sdc2_clk"},
- {GPIO_CFG(63, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc2_cmd"},
- {GPIO_CFG(64, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc2_dat_3"},
- {GPIO_CFG(65, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc2_dat_2"},
- {GPIO_CFG(66, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc2_dat_1"},
- {GPIO_CFG(67, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc2_dat_0"},
- };
- static struct msm_gpio sdc3_cfg_data[] = {
- {GPIO_CFG(88, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), "sdc3_clk"},
- {GPIO_CFG(89, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_cmd"},
- {GPIO_CFG(90, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_3"},
- {GPIO_CFG(91, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_2"},
- {GPIO_CFG(92, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_1"},
- {GPIO_CFG(93, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_0"},
- #ifdef CONFIG_MMC_MSM_SDC3_8_BIT_SUPPORT
- {GPIO_CFG(158, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_4"},
- {GPIO_CFG(159, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_5"},
- {GPIO_CFG(160, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_6"},
- {GPIO_CFG(161, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc3_dat_7"},
- #endif
- };
- static struct msm_gpio sdc4_cfg_data[] = {
- {GPIO_CFG(142, 3, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA), "sdc4_clk"},
- {GPIO_CFG(143, 3, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc4_cmd"},
- {GPIO_CFG(144, 2, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc4_dat_0"},
- {GPIO_CFG(145, 2, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc4_dat_1"},
- {GPIO_CFG(146, 3, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc4_dat_2"},
- {GPIO_CFG(147, 3, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_8MA), "sdc4_dat_3"},
- };
- static struct sdcc_gpio sdcc_cfg_data[] = {
- {
- .cfg_data = sdc1_cfg_data,
- .size = ARRAY_SIZE(sdc1_cfg_data),
- },
- {
- .cfg_data = sdc2_cfg_data,
- .size = ARRAY_SIZE(sdc2_cfg_data),
- },
- {
- .cfg_data = sdc3_cfg_data,
- .size = ARRAY_SIZE(sdc3_cfg_data),
- },
- {
- .cfg_data = sdc4_cfg_data,
- .size = ARRAY_SIZE(sdc4_cfg_data),
- },
- };
- static unsigned long vreg_sts, gpio_sts;
- static void msm_sdcc_setup_gpio(int dev_id, unsigned int enable)
- {
- int rc = 0;
- struct sdcc_gpio *curr;
- curr = &sdcc_cfg_data[dev_id - 1];
- if (!(test_bit(dev_id, &gpio_sts)^enable))
- return;
- if (enable) {
- set_bit(dev_id, &gpio_sts);
- rc = msm_gpios_request_enable(curr->cfg_data, curr->size);
- if (rc)
- printk(KERN_ERR "%s: Failed to turn on GPIOs for slot %d\n",
- __func__, dev_id);
- } else {
- clear_bit(dev_id, &gpio_sts);
- msm_gpios_disable_free(curr->cfg_data, curr->size);
- }
- }
- static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
- {
- int rc = 0;
- struct platform_device *pdev;
- pdev = container_of(dv, struct platform_device, dev);
- msm_sdcc_setup_gpio(pdev->id, !!vdd);
- if (vdd == 0) {
- if (!vreg_sts)
- return 0;
- clear_bit(pdev->id, &vreg_sts);
- if (!vreg_sts) {
- rc = vreg_disable(vreg_mmc);
- if (rc)
- printk(KERN_ERR "%s: return val: %d \n",
- __func__, rc);
- }
- return 0;
- }
- if (!vreg_sts) {
- rc = vreg_set_level(vreg_mmc, PMIC_VREG_GP6_LEVEL);
- if (!rc)
- rc = vreg_enable(vreg_mmc);
- if (rc)
- printk(KERN_ERR "%s: return val: %d \n",
- __func__, rc);
- }
- set_bit(pdev->id, &vreg_sts);
- return 0;
- }
- #endif
- #if (defined(CONFIG_MMC_MSM_SDC1_SUPPORT)\
- || defined(CONFIG_MMC_MSM_SDC2_SUPPORT)\
- || defined(CONFIG_MMC_MSM_SDC4_SUPPORT))
- static int msm_sdcc_get_wpswitch(struct device *dv)
- {
- void __iomem *wp_addr = 0;
- uint32_t ret = 0;
- struct platform_device *pdev;
- if (!(machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf()))
- return -1;
- pdev = container_of(dv, struct platform_device, dev);
- wp_addr = ioremap(FPGA_SDCC_STATUS, 4);
- if (!wp_addr) {
- pr_err("%s: Could not remap %x\n", __func__, FPGA_SDCC_STATUS);
- return -ENOMEM;
- }
- ret = (readl(wp_addr) >> ((pdev->id - 1) << 1)) & (0x03);
- pr_info("%s: WP/CD Status for Slot %d = 0x%x \n", __func__,
- pdev->id, ret);
- iounmap(wp_addr);
- return ((ret == 0x02) ? 1 : 0);
- }
- #endif
- #ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
- static struct mmc_platform_data qsd8x50_sdc1_data = {
- .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .translate_vdd = msm_sdcc_setup_power,
- .mmc_bus_width = MMC_CAP_4_BIT_DATA,
- .wpswitch = msm_sdcc_get_wpswitch,
- #ifdef CONFIG_MMC_MSM_SDC1_DUMMY52_REQUIRED
- .dummy52_required = 1,
- #endif
- .msmsdcc_fmin = 144000,
- .msmsdcc_fmid = 25000000,
- .msmsdcc_fmax = 49152000,
- .nonremovable = 0,
- };
- #endif
- #ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
- static struct mmc_platform_data qsd8x50_sdc2_data = {
- .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .translate_vdd = msm_sdcc_setup_power,
- .mmc_bus_width = MMC_CAP_4_BIT_DATA,
- .wpswitch = msm_sdcc_get_wpswitch,
- #ifdef CONFIG_MMC_MSM_SDC2_DUMMY52_REQUIRED
- .dummy52_required = 1,
- #endif
- .msmsdcc_fmin = 144000,
- .msmsdcc_fmid = 25000000,
- .msmsdcc_fmax = 49152000,
- .nonremovable = 1,
- };
- #endif
- #ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
- static struct mmc_platform_data qsd8x50_sdc3_data = {
- .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .translate_vdd = msm_sdcc_setup_power,
- #ifdef CONFIG_MMC_MSM_SDC3_8_BIT_SUPPORT
- .mmc_bus_width = MMC_CAP_8_BIT_DATA,
- #else
- .mmc_bus_width = MMC_CAP_4_BIT_DATA,
- #endif
- #ifdef CONFIG_MMC_MSM_SDC3_DUMMY52_REQUIRED
- .dummy52_required = 1,
- #endif
- .msmsdcc_fmin = 144000,
- .msmsdcc_fmid = 25000000,
- .msmsdcc_fmax = 49152000,
- .nonremovable = 0,
- };
- #endif
- #ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
- static struct mmc_platform_data qsd8x50_sdc4_data = {
- .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .translate_vdd = msm_sdcc_setup_power,
- .mmc_bus_width = MMC_CAP_4_BIT_DATA,
- .wpswitch = msm_sdcc_get_wpswitch,
- #ifdef CONFIG_MMC_MSM_SDC4_DUMMY52_REQUIRED
- .dummy52_required = 1,
- #endif
- .msmsdcc_fmin = 144000,
- .msmsdcc_fmid = 25000000,
- .msmsdcc_fmax = 49152000,
- .nonremovable = 0,
- };
- #endif
- static void __init qsd8x50_init_mmc(void)
- {
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa())
- vreg_mmc = vreg_get(NULL, "gp6");
- else
- vreg_mmc = vreg_get(NULL, "gp5");
- if (IS_ERR(vreg_mmc)) {
- printk(KERN_ERR "%s: vreg get failed (%ld)\n",
- __func__, PTR_ERR(vreg_mmc));
- return;
- }
- #ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
- msm_add_sdcc(1, &qsd8x50_sdc1_data);
- #endif
- if (machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf()) {
- #ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
- msm_add_sdcc(2, &qsd8x50_sdc2_data);
- #endif
- #ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
- msm_add_sdcc(3, &qsd8x50_sdc3_data);
- #endif
- #ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
- msm_add_sdcc(4, &qsd8x50_sdc4_data);
- #endif
- }
- }
- static void __init qsd8x50_cfg_smc91x(void)
- {
- int rc = 0;
- if (machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf()) {
- smc91x_resources[0].start = 0x70000300;
- smc91x_resources[0].end = 0x700003ff;
- smc91x_resources[1].start = MSM_GPIO_TO_INT(156);
- smc91x_resources[1].end = MSM_GPIO_TO_INT(156);
- } else if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) {
- smc91x_resources[0].start = 0x84000300;
- smc91x_resources[0].end = 0x840003ff;
- smc91x_resources[1].start = MSM_GPIO_TO_INT(87);
- smc91x_resources[1].end = MSM_GPIO_TO_INT(87);
- rc = gpio_tlmm_config(GPIO_CFG(87, 0, GPIO_CFG_INPUT,
- GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- GPIO_CFG_ENABLE);
- if (rc) {
- printk(KERN_ERR "%s: gpio_tlmm_config=%d\n",
- __func__, rc);
- }
- } else
- printk(KERN_ERR "%s: invalid machine type\n", __func__);
- }
- static struct msm_pm_platform_data msm_pm_data[MSM_PM_SLEEP_MODE_NR] = {
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE].supported = 1,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE].suspend_enabled = 1,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE].idle_enabled = 1,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE].latency = 8594,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE].residency = 23740,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN].supported = 1,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN].suspend_enabled = 1,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN].idle_enabled = 1,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN].latency = 4594,
- [MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN].residency = 23740,
- [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].supported = 1,
- [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].suspend_enabled
- = 1,
- [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].idle_enabled = 0,
- [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency = 443,
- [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].residency = 1098,
- [MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT].supported = 1,
- [MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT].suspend_enabled = 1,
- [MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT].idle_enabled = 1,
- [MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT].latency = 2,
- [MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT].residency = 0,
- };
- static void
- msm_i2c_gpio_config(int iface, int config_type)
- {
- int gpio_scl;
- int gpio_sda;
- if (iface) {
- gpio_scl = 60;
- gpio_sda = 61;
- } else {
- gpio_scl = 95;
- gpio_sda = 96;
- }
- if (config_type) {
- gpio_tlmm_config(GPIO_CFG(gpio_scl, 1, GPIO_CFG_INPUT,
- GPIO_CFG_NO_PULL, GPIO_CFG_16MA), GPIO_CFG_ENABLE);
- gpio_tlmm_config(GPIO_CFG(gpio_sda, 1, GPIO_CFG_INPUT,
- GPIO_CFG_NO_PULL, GPIO_CFG_16MA), GPIO_CFG_ENABLE);
- } else {
- gpio_tlmm_config(GPIO_CFG(gpio_scl, 0, GPIO_CFG_OUTPUT,
- GPIO_CFG_NO_PULL, GPIO_CFG_16MA), GPIO_CFG_ENABLE);
- gpio_tlmm_config(GPIO_CFG(gpio_sda, 0, GPIO_CFG_OUTPUT,
- GPIO_CFG_NO_PULL, GPIO_CFG_16MA), GPIO_CFG_ENABLE);
- }
- }
- static struct msm_i2c_platform_data msm_i2c_pdata = {
- .clk_freq = 100000,
- .rsl_id = SMEM_SPINLOCK_I2C,
- .pri_clk = 95,
- .pri_dat = 96,
- .aux_clk = 60,
- .aux_dat = 61,
- .msm_i2c_config_gpio = msm_i2c_gpio_config,
- };
- static void __init msm_device_i2c_init(void)
- {
- if (gpio_request(95, "i2c_pri_clk"))
- pr_err("failed to request gpio i2c_pri_clk\n");
- if (gpio_request(96, "i2c_pri_dat"))
- pr_err("failed to request gpio i2c_pri_dat\n");
- if (gpio_request(60, "i2c_sec_clk"))
- pr_err("failed to request gpio i2c_sec_clk\n");
- if (gpio_request(61, "i2c_sec_dat"))
- pr_err("failed to request gpio i2c_sec_dat\n");
- msm_i2c_pdata.rmutex = 1;
- msm_i2c_pdata.pm_lat =
- msm_pm_data[MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN]
- .latency;
- msm_device_i2c.dev.platform_data = &msm_i2c_pdata;
- }
- static unsigned pmem_kernel_ebi1_size = PMEM_KERNEL_EBI1_SIZE;
- static void __init pmem_kernel_ebi1_size_setup(char **p)
- {
- pmem_kernel_ebi1_size = memparse(*p, p);
- }
- __early_param("pmem_kernel_ebi1_size=", pmem_kernel_ebi1_size_setup);
- #ifdef CONFIG_KERNEL_PMEM_SMI_REGION
- static unsigned pmem_kernel_smi_size = MSM_PMEM_SMIPOOL_SIZE;
- static void __init pmem_kernel_smi_size_setup(char **p)
- {
- pmem_kernel_smi_size = memparse(*p, p);
- /* Make sure that we don't allow more SMI memory then is
- available - the kernel mapping code has no way of knowing
- if it has gone over the edge */
- if (pmem_kernel_smi_size > MSM_PMEM_SMIPOOL_SIZE)
- pmem_kernel_smi_size = MSM_PMEM_SMIPOOL_SIZE;
- }
- __early_param("pmem_kernel_smi_size=", pmem_kernel_smi_size_setup);
- #endif
- static unsigned pmem_sf_size = MSM_PMEM_SF_SIZE;
- static void __init pmem_sf_size_setup(char **p)
- {
- pmem_sf_size = memparse(*p, p);
- }
- __early_param("pmem_sf_size=", pmem_sf_size_setup);
- static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE;
- static void __init pmem_adsp_size_setup(char **p)
- {
- pmem_adsp_size = memparse(*p, p);
- }
- __early_param("pmem_adsp_size=", pmem_adsp_size_setup);
- static unsigned audio_size = MSM_AUDIO_SIZE;
- static void __init audio_size_setup(char **p)
- {
- audio_size = memparse(*p, p);
- }
- __early_param("audio_size=", audio_size_setup);
- static void __init qsd8x50_init(void)
- {
- if (socinfo_init() < 0)
- printk(KERN_ERR "%s: socinfo_init() failed!\n",
- __func__);
- msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
- platform_add_devices(early_devices, ARRAY_SIZE(early_devices));
- qsd8x50_cfg_smc91x();
- msm_acpu_clock_init(&qsd8x50_clock_data);
- msm_hsusb_pdata.swfi_latency =
- msm_pm_data
- [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
- msm_device_hsusb_peripheral.dev.platform_data = &msm_hsusb_pdata;
- msm_otg_pdata.swfi_latency =
- msm_pm_data
- [MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
- msm_device_otg.dev.platform_data = &msm_otg_pdata;
- msm_device_gadget_peripheral.dev.platform_data = &msm_gadget_pdata;
- #if defined(CONFIG_TSIF) || defined(CONFIG_TSIF_MODULE)
- msm_device_tsif.dev.platform_data = &tsif_platform_data;
- #endif
- platform_add_devices(devices, ARRAY_SIZE(devices));
- msm_fb_add_devices();
- #ifdef CONFIG_MSM_CAMERA
- config_camera_off_gpios(); /* might not be necessary */
- #endif
- qsd8x50_init_usb();
- qsd8x50_init_mmc();
- bt_power_init();
- audio_gpio_init();
- msm_device_i2c_init();
- msm_qsd_spi_init();
- i2c_register_board_info(0, msm_i2c_board_info,
- ARRAY_SIZE(msm_i2c_board_info));
- spi_register_board_info(msm_spi_board_info,
- ARRAY_SIZE(msm_spi_board_info));
- msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data));
- kgsl_phys_memory_init();
- #ifdef CONFIG_SURF_FFA_GPIO_KEYPAD
- if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa())
- platform_device_register(&keypad_device_8k_ffa);
- else
- platform_device_register(&keypad_device_surf);
- #endif
- }
- static void __init qsd8x50_allocate_memory_regions(void)
- {
- void *addr;
- unsigned long size;
- size = pmem_kernel_ebi1_size;
- if (size) {
- addr = alloc_bootmem_aligned(size, 0x100000);
- android_pmem_kernel_ebi1_pdata.start = __pa(addr);
- android_pmem_kernel_ebi1_pdata.size = size;
- pr_info("allocating %lu bytes at %p (%lx physical) for kernel"
- " ebi1 pmem arena\n", size, addr, __pa(addr));
- }
- #ifdef CONFIG_KERNEL_PMEM_SMI_REGION
- size = pmem_kernel_smi_size;
- if (size > MSM_PMEM_SMIPOOL_SIZE) {
- printk(KERN_ERR "pmem kernel smi arena size %lu is too big\n",
- size);
- size = MSM_PMEM_SMIPOOL_SIZE;
- }
- android_pmem_kernel_smi_pdata.start = MSM_PMEM_SMIPOOL_BASE;
- android_pmem_kernel_smi_pdata.size = size;
- pr_info("allocating %lu bytes at %lx (%lx physical)"
- "for pmem kernel smi arena\n", size,
- (long unsigned int) MSM_PMEM_SMIPOOL_BASE,
- __pa(MSM_PMEM_SMIPOOL_BASE));
- #endif
- size = pmem_sf_size;
- if (size) {
- addr = alloc_bootmem(size);
- android_pmem_pdata.start = __pa(addr);
- android_pmem_pdata.size = size;
- pr_info("allocating %lu bytes at %p (%lx physical) for sf "
- "pmem arena\n", size, addr, __pa(addr));
- }
- size = pmem_adsp_size;
- if (size) {
- addr = alloc_bootmem(size);
- android_pmem_adsp_pdata.start = __pa(addr);
- android_pmem_adsp_pdata.size = size;
- pr_info("allocating %lu bytes at %p (%lx physical) for adsp "
- "pmem arena\n", size, addr, __pa(addr));
- }
- size = MSM_FB_SIZE;
- addr = (void *)MSM_FB_BASE;
- msm_fb_resources[0].start = (unsigned long)addr;
- msm_fb_resources[0].end = msm_fb_resources[0].start + size - 1;
- pr_info("using %lu bytes of SMI at %lx physical for fb\n",
- size, (unsigned long)addr);
- size = audio_size ? : MSM_AUDIO_SIZE;
- addr = alloc_bootmem(size);
- msm_audio_resources[0].start = __pa(addr);
- msm_audio_resources[0].end = msm_audio_resources[0].start + size - 1;
- pr_info("allocating %lu bytes at %p (%lx physical) for audio\n",
- size, addr, __pa(addr));
- }
- static void __init qsd8x50_map_io(void)
- {
- msm_shared_ram_phys = MSM_SHARED_RAM_PHYS;
- msm_map_qsd8x50_io();
- qsd8x50_allocate_memory_regions();
- }
- MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
- #ifdef CONFIG_MSM_DEBUG_UART
- .phys_io = MSM_DEBUG_UART_PHYS,
- .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
- #endif
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = qsd8x50_map_io,
- .init_irq = qsd8x50_init_irq,
- .init_machine = qsd8x50_init,
- .timer = &msm_timer,
- MACHINE_END
- MACHINE_START(QSD8X50_FFA, "QCT QSD8X50 FFA")
- #ifdef CONFIG_MSM_DEBUG_UART
- .phys_io = MSM_DEBUG_UART_PHYS,
- .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
- #endif
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = qsd8x50_map_io,
- .init_irq = qsd8x50_init_irq,
- .init_machine = qsd8x50_init,
- .timer = &msm_timer,
- MACHINE_END
- MACHINE_START(QSD8X50A_SURF, "QCT QSD8X50A SURF")
- #ifdef CONFIG_MSM_DEBUG_UART
- .phys_io = MSM_DEBUG_UART_PHYS,
- .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
- #endif
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = qsd8x50_map_io,
- .init_irq = qsd8x50_init_irq,
- .init_machine = qsd8x50_init,
- .timer = &msm_timer,
- MACHINE_END
- MACHINE_START(QSD8X50A_FFA, "QCT QSD8X50A FFA")
- #ifdef CONFIG_MSM_DEBUG_UART
- .phys_io = MSM_DEBUG_UART_PHYS,
- .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
- #endif
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = qsd8x50_map_io,
- .init_irq = qsd8x50_init_irq,
- .init_machine = qsd8x50_init,
- .timer = &msm_timer,
- MACHINE_END