/includes/DefaultSettings.php
PHP | 6229 lines | 3635 code | 342 blank | 2252 comment | 1 complexity | 89594001d152ccab661228ff148970c3 MD5 | raw file
Possible License(s): GPL-2.0, Apache-2.0, LGPL-3.0
- <?php
- /**
- * Default values for MediaWiki configuration settings.
- *
- *
- * NEVER EDIT THIS FILE
- *
- *
- * To customize your installation, edit "LocalSettings.php". If you make
- * changes here, they will be lost on next upgrade of MediaWiki!
- *
- * In this file, variables whose default values depend on other
- * variables are set to false. The actual default value of these variables
- * will only be set in Setup.php, taking into account any custom settings
- * performed in LocalSettings.php.
- *
- * Documentation is in the source and on:
- * http://www.mediawiki.org/wiki/Manual:Configuration_settings
- *
- * @warning Note: this (and other things) will break if the autoloader is not
- * enabled. Please include includes/AutoLoader.php before including this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- * http://www.gnu.org/copyleft/gpl.html
- *
- * @file
- */
- /**
- * @defgroup Globalsettings Global settings
- */
- /**
- * @cond file_level_code
- * This is not a valid entry point, perform no further processing unless
- * MEDIAWIKI is defined
- */
- if( !defined( 'MEDIAWIKI' ) ) {
- echo "This file is part of MediaWiki and is not a valid entry point\n";
- die( 1 );
- }
- /**
- * wgConf hold the site configuration.
- * Not used for much in a default install.
- */
- $wgConf = new SiteConfiguration;
- /** MediaWiki version number */
- $wgVersion = '1.20.0';
- /** Name of the site. It must be changed in LocalSettings.php */
- $wgSitename = 'MediaWiki';
- /**
- * URL of the server.
- *
- * @par Example:
- * @code
- * $wgServer = 'http://example.com';
- * @endcode
- *
- * This is usually detected correctly by MediaWiki. If MediaWiki detects the
- * wrong server, it will redirect incorrectly after you save a page. In that
- * case, set this variable to fix it.
- *
- * If you want to use protocol-relative URLs on your wiki, set this to a
- * protocol-relative URL like '//example.com' and set $wgCanonicalServer
- * to a fully qualified URL.
- */
- $wgServer = WebRequest::detectServer();
- /**
- * Canonical URL of the server, to use in IRC feeds and notification e-mails.
- * Must be fully qualified, even if $wgServer is protocol-relative.
- *
- * Defaults to $wgServer, expanded to a fully qualified http:// URL if needed.
- */
- $wgCanonicalServer = false;
- /************************************************************************//**
- * @name Script path settings
- * @{
- */
- /**
- * The path we should point to.
- * It might be a virtual path in case with use apache mod_rewrite for example.
- *
- * This *needs* to be set correctly.
- *
- * Other paths will be set to defaults based on it unless they are directly
- * set in LocalSettings.php
- */
- $wgScriptPath = '/wiki';
- /**
- * Whether to support URLs like index.php/Page_title These often break when PHP
- * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
- * but then again it may not; lighttpd converts incoming path data to lowercase
- * on systems with case-insensitive filesystems, and there have been reports of
- * problems on Apache as well.
- *
- * To be safe we'll continue to keep it off by default.
- *
- * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
- * incorrect garbage, or to true if it is really correct.
- *
- * The default $wgArticlePath will be set based on this value at runtime, but if
- * you have customized it, having this incorrectly set to true can cause
- * redirect loops when "pretty URLs" are used.
- */
- $wgUsePathInfo =
- ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
- ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
- ( strpos( php_sapi_name(), 'isapi' ) === false );
- /**
- * The extension to append to script names by default. This can either be .php
- * or .php5.
- *
- * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
- * variable is provided to support those providers.
- */
- $wgScriptExtension = '.php';
- /**@}*/
- /************************************************************************//**
- * @name URLs and file paths
- *
- * These various web and file path variables are set to their defaults
- * in Setup.php if they are not explicitly set from LocalSettings.php.
- *
- * These will relatively rarely need to be set manually, unless you are
- * splitting style sheets or images outside the main document root.
- *
- * In this section, a "path" is usually a host-relative URL, i.e. a URL without
- * the host part, that starts with a slash. In most cases a full URL is also
- * acceptable. A "directory" is a local file path.
- *
- * In both paths and directories, trailing slashes should not be included.
- *
- * @{
- */
- /**
- * The URL path to index.php.
- *
- * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
- */
- $wgScript = false;
- /**
- * The URL path to redirect.php. This is a script that is used by the Nostalgia
- * skin.
- *
- * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
- */
- $wgRedirectScript = false;
- /**
- * The URL path to load.php.
- *
- * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
- */
- $wgLoadScript = false;
- /**
- * The URL path of the skins directory.
- * Defaults to "{$wgScriptPath}/skins".
- */
- $wgStylePath = false;
- $wgStyleSheetPath = &$wgStylePath;
- /**
- * The URL path of the skins directory. Should not point to an external domain.
- * Defaults to "{$wgScriptPath}/skins".
- */
- $wgLocalStylePath = false;
- /**
- * The URL path of the extensions directory.
- * Defaults to "{$wgScriptPath}/extensions".
- * @since 1.16
- */
- $wgExtensionAssetsPath = false;
- /**
- * Filesystem stylesheets directory.
- * Defaults to "{$IP}/skins".
- */
- $wgStyleDirectory = false;
- /**
- * The URL path for primary article page views. This path should contain $1,
- * which is replaced by the article title.
- *
- * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1",
- * depending on $wgUsePathInfo.
- */
- $wgArticlePath = false;
- /**
- * The URL path for the images directory.
- * Defaults to "{$wgScriptPath}/images".
- */
- $wgUploadPath = false;
- /**
- * The filesystem path of the images directory. Defaults to "{$IP}/images".
- */
- $wgUploadDirectory = false;
- /**
- * Directory where the cached page will be saved.
- * Defaults to "{$wgUploadDirectory}/cache".
- */
- $wgFileCacheDirectory = false;
- /**
- * The URL path of the wiki logo. The logo size should be 135x135 pixels.
- * Defaults to "{$wgStylePath}/common/images/wiki.png".
- */
- $wgLogo = false;
- /**
- * The URL path of the shortcut icon.
- */
- $wgFavicon = '/favicon.ico';
- /**
- * The URL path of the icon for iPhone and iPod Touch web app bookmarks.
- * Defaults to no icon.
- */
- $wgAppleTouchIcon = false;
- /**
- * The local filesystem path to a temporary directory. This is not required to
- * be web accessible.
- *
- * When this setting is set to false, its value will be set through a call
- * to wfTempDir(). See that methods implementation for the actual detection
- * logic.
- *
- * Developers should use the global function wfTempDir() instead of this
- * variable.
- *
- * @see wfTempDir()
- * @note Default changed to false in MediaWiki 1.20.
- *
- */
- $wgTmpDirectory = false;
- /**
- * If set, this URL is added to the start of $wgUploadPath to form a complete
- * upload URL.
- */
- $wgUploadBaseUrl = '';
- /**
- * To enable remote on-demand scaling, set this to the thumbnail base URL.
- * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg
- * where 'e6' are the first two characters of the MD5 hash of the file name.
- * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed.
- */
- $wgUploadStashScalerBaseUrl = false;
- /**
- * To set 'pretty' URL paths for actions other than
- * plain page views, add to this array.
- *
- * @par Example:
- * Set pretty URL for the edit action:
- * @code
- * 'edit' => "$wgScriptPath/edit/$1"
- * @endcode
- *
- * There must be an appropriate script or rewrite rule in place to handle these
- * URLs.
- */
- $wgActionPaths = array();
- /**@}*/
- /************************************************************************//**
- * @name Files and file uploads
- * @{
- */
- /** Uploads have to be specially set up to be secure */
- $wgEnableUploads = false;
- /**
- * The maximum age of temporary (incomplete) uploaded files
- */
- $wgUploadStashMaxAge = 6 * 3600; // 6 hours
- /** Allows to move images and other media files */
- $wgAllowImageMoving = true;
- /**
- * These are additional characters that should be replaced with '-' in filenames
- */
- $wgIllegalFileChars = ":";
- /**
- * @deprecated since 1.17 use $wgDeletedDirectory
- */
- $wgFileStore = array();
- /**
- * What directory to place deleted uploads in.
- * Defaults to "{$wgUploadDirectory}/deleted".
- */
- $wgDeletedDirectory = false;
- /**
- * Set this to true if you use img_auth and want the user to see details on why access failed.
- */
- $wgImgAuthDetails = false;
- /**
- * If this is enabled, img_auth.php will not allow image access unless the wiki
- * is private. This improves security when image uploads are hosted on a
- * separate domain.
- */
- $wgImgAuthPublicTest = true;
- /**
- * File repository structures
- *
- * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
- * an array of such structures. Each repository structure is an associative
- * array of properties configuring the repository.
- *
- * Properties required for all repos:
- * - class The class name for the repository. May come from the core or an extension.
- * The core repository classes are FileRepo, LocalRepo, ForeignDBRepo.
- * FSRepo is also supported for backwards compatibility.
- *
- * - name A unique name for the repository (but $wgLocalFileRepo should be 'local').
- * The name should consist of alpha-numberic characters.
- * - backend A file backend name (see $wgFileBackends).
- *
- * For most core repos:
- * - zones Associative array of zone names that each map to an array with:
- * container : backend container name the zone is in
- * directory : root path within container for the zone
- * url : base URL to the root of the zone
- * handlerUrl : base script handled URL to the root of the zone
- * (see FileRepo::getZoneHandlerUrl() function)
- * Zones default to using "<repo name>-<zone name>" as the container name
- * and default to using the container root as the zone's root directory.
- * Nesting of zone locations within other zones should be avoided.
- * - url Public zone URL. The 'zones' settings take precedence.
- * - hashLevels The number of directory levels for hash-based division of files
- * - thumbScriptUrl The URL for thumb.php (optional, not recommended)
- * - transformVia404 Whether to skip media file transformation on parse and rely on a 404
- * handler instead.
- * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
- * determines whether filenames implicitly start with a capital letter.
- * The current implementation may give incorrect description page links
- * when the local $wgCapitalLinks and initialCapital are mismatched.
- * - pathDisclosureProtection
- * May be 'paranoid' to remove all parameters from error messages, 'none' to
- * leave the paths in unchanged, or 'simple' to replace paths with
- * placeholders. Default for LocalRepo is 'simple'.
- * - fileMode This allows wikis to set the file mode when uploading/moving files. Default
- * is 0644.
- * - directory The local filesystem directory where public files are stored. Not used for
- * some remote repos.
- * - thumbDir The base thumbnail directory. Defaults to "<directory>/thumb".
- * - thumbUrl The base thumbnail URL. Defaults to "<url>/thumb".
- * - isPrivate Set this if measures should always be taken to keep the files private.
- * One should not trust this to assure that the files are not web readable;
- * the server configuration should be done manually depending on the backend.
- *
- * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
- * for local repositories:
- * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
- * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
- * http://en.wikipedia.org/w
- * - scriptExtension Script extension of the MediaWiki installation, equivalent to
- * $wgScriptExtension, e.g. .php5 defaults to .php
- *
- * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
- * - fetchDescription Fetch the text of the remote file description page. Equivalent to
- * $wgFetchCommonsDescriptions.
- * - abbrvThreshold File names over this size will use the short form of thumbnail names.
- * Short thumbnail names only have the width, parameters, and the extension.
- *
- * ForeignDBRepo:
- * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
- * equivalent to the corresponding member of $wgDBservers
- * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
- * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
- *
- * ForeignAPIRepo:
- * - apibase Use for the foreign API's URL
- * - apiThumbCacheExpiry How long to locally cache thumbs for
- *
- * If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values.
- * Otherwise, set $wgLocalFileRepo to a repository structure as described above.
- * If you set $wgUseInstantCommons to true, it will add an entry for Commons.
- * If you set $wgForeignFileRepos to an array of repostory structures, those will
- * be searched after the local file repo.
- * Otherwise, you will only have access to local media files.
- *
- * @see Setup.php for an example usage and default initialization.
- */
- $wgLocalFileRepo = false;
- /** @see $wgLocalFileRepo */
- $wgForeignFileRepos = array();
- /**
- * Use Commons as a remote file repository. Essentially a wrapper, when this
- * is enabled $wgForeignFileRepos will point at Commons with a set of default
- * settings
- */
- $wgUseInstantCommons = false;
- /**
- * File backend structure configuration.
- * This is an array of file backend configuration arrays.
- * Each backend configuration has the following parameters:
- * - 'name' : A unique name for the backend
- * - 'class' : The file backend class to use
- * - 'wikiId' : A unique string that identifies the wiki (container prefix)
- * - 'lockManager' : The name of a lock manager (see $wgLockManagers)
- *
- * Additional parameters are specific to the class used.
- */
- $wgFileBackends = array();
- /**
- * Array of configuration arrays for each lock manager.
- * Each backend configuration has the following parameters:
- * - 'name' : A unique name for the lock manager
- * - 'class' : The lock manger class to use
- * Additional parameters are specific to the class used.
- */
- $wgLockManagers = array();
- /**
- * Show EXIF data, on by default if available.
- * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
- *
- * @note FOR WINDOWS USERS:
- * To enable EXIF functions, add the following lines to the "Windows
- * extensions" section of php.ini:
- * @code{.ini}
- * extension=extensions/php_mbstring.dll
- * extension=extensions/php_exif.dll
- * @endcode
- */
- $wgShowEXIF = function_exists( 'exif_read_data' );
- /**
- * If to automatically update the img_metadata field
- * if the metadata field is outdated but compatible with the current version.
- * Defaults to false.
- */
- $wgUpdateCompatibleMetadata = false;
- /**
- * If you operate multiple wikis, you can define a shared upload path here.
- * Uploads to this wiki will NOT be put there - they will be put into
- * $wgUploadDirectory.
- * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
- * no file of the given name is found in the local repository (for [[File:..]],
- * [[Media:..]] links). Thumbnails will also be looked for and generated in this
- * directory.
- *
- * Note that these configuration settings can now be defined on a per-
- * repository basis for an arbitrary number of file repositories, using the
- * $wgForeignFileRepos variable.
- */
- $wgUseSharedUploads = false;
- /** Full path on the web server where shared uploads can be found */
- $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
- /** Fetch commons image description pages and display them on the local wiki? */
- $wgFetchCommonsDescriptions = false;
- /** Path on the file system where shared uploads can be found. */
- $wgSharedUploadDirectory = "/var/www/wiki3/images";
- /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
- $wgSharedUploadDBname = false;
- /** Optional table prefix used in database. */
- $wgSharedUploadDBprefix = '';
- /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
- $wgCacheSharedUploads = true;
- /**
- * Allow for upload to be copied from an URL.
- * The timeout for copy uploads is set by $wgHTTPTimeout.
- * You have to assign the user right 'upload_by_url' to a user group, to use this.
- */
- $wgAllowCopyUploads = false;
- /**
- * Allow asynchronous copy uploads.
- * This feature is experimental and broken as of r81612.
- */
- $wgAllowAsyncCopyUploads = false;
- /**
- * A list of domains copy uploads can come from
- *
- * @since 1.20
- */
- $wgCopyUploadsDomains = array();
- /**
- * Proxy to use for copy upload requests.
- * @since 1.20
- */
- $wgCopyUploadProxy = false;
- /**
- * Max size for uploads, in bytes. If not set to an array, applies to all
- * uploads. If set to an array, per upload type maximums can be set, using the
- * file and url keys. If the * key is set this value will be used as maximum
- * for non-specified types.
- *
- * @par Example:
- * @code
- * $wgMaxUploadSize = array(
- * '*' => 250 * 1024,
- * 'url' => 500 * 1024,
- * );
- * @endcode
- * Sets the maximum for all uploads to 250 kB except for upload-by-url, which
- * will have a maximum of 500 kB.
- *
- */
- $wgMaxUploadSize = 1024*1024*100; # 100MB
- /**
- * Point the upload navigation link to an external URL
- * Useful if you want to use a shared repository by default
- * without disabling local uploads (use $wgEnableUploads = false for that).
- *
- * @par Example:
- * @code
- * $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
- * @endcode
- */
- $wgUploadNavigationUrl = false;
- /**
- * Point the upload link for missing files to an external URL, as with
- * $wgUploadNavigationUrl. The URL will get "(?|&)wpDestFile=<filename>"
- * appended to it as appropriate.
- */
- $wgUploadMissingFileUrl = false;
- /**
- * Give a path here to use thumb.php for thumbnail generation on client
- * request, instead of generating them on render and outputting a static URL.
- * This is necessary if some of your apache servers don't have read/write
- * access to the thumbnail path.
- *
- * @par Example:
- * @code
- * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
- * @endcode
- */
- $wgThumbnailScriptPath = false;
- /**
- * @see $wgThumbnailScriptPath
- */
- $wgSharedThumbnailScriptPath = false;
- /**
- * Set this to false if you do not want MediaWiki to divide your images
- * directory into many subdirectories, for improved performance.
- *
- * It's almost always good to leave this enabled. In previous versions of
- * MediaWiki, some users set this to false to allow images to be added to the
- * wiki by simply copying them into $wgUploadDirectory and then running
- * maintenance/rebuildImages.php to register them in the database. This is no
- * longer recommended, use maintenance/importImages.php instead.
- *
- * @note That this variable may be ignored if $wgLocalFileRepo is set.
- * @todo Deprecate the setting and ultimately remove it from Core.
- */
- $wgHashedUploadDirectory = true;
- /**
- * Set the following to false especially if you have a set of files that need to
- * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
- * directory layout.
- */
- $wgHashedSharedUploadDirectory = true;
- /**
- * Base URL for a repository wiki. Leave this blank if uploads are just stored
- * in a shared directory and not meant to be accessible through a separate wiki.
- * Otherwise the image description pages on the local wiki will link to the
- * image description page on this wiki.
- *
- * Please specify the namespace, as in the example below.
- */
- $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
- /**
- * This is the list of preferred extensions for uploading files. Uploading files
- * with extensions not in this list will trigger a warning.
- *
- * @warning If you add any OpenOffice or Microsoft Office file formats here,
- * such as odt or doc, and untrusted users are allowed to upload files, then
- * your wiki will be vulnerable to cross-site request forgery (CSRF).
- */
- $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
- /**
- * Files with these extensions will never be allowed as uploads.
- * An array of file extensions to blacklist. You should append to this array
- * if you want to blacklist additional files.
- * */
- $wgFileBlacklist = array(
- # HTML may contain cookie-stealing JavaScript and web bugs
- 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
- # PHP scripts may execute arbitrary code on the server
- 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
- # Other types that may be interpreted by some servers
- 'shtml', 'jhtml', 'pl', 'py', 'cgi',
- # May contain harmful executables for Windows victims
- 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
- /**
- * Files with these mime types will never be allowed as uploads
- * if $wgVerifyMimeType is enabled.
- */
- $wgMimeTypeBlacklist = array(
- # HTML may contain cookie-stealing JavaScript and web bugs
- 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
- # PHP scripts may execute arbitrary code on the server
- 'application/x-php', 'text/x-php',
- # Other types that may be interpreted by some servers
- 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
- # Client-side hazards on Internet Explorer
- 'text/scriptlet', 'application/x-msdownload',
- # Windows metafile, client-side vulnerability on some systems
- 'application/x-msmetafile',
- );
- /**
- * Allow Java archive uploads.
- * This is not recommended for public wikis since a maliciously-constructed
- * applet running on the same domain as the wiki can steal the user's cookies.
- */
- $wgAllowJavaUploads = false;
- /**
- * This is a flag to determine whether or not to check file extensions on upload.
- *
- * @warning Setting this to false is insecure for public wikis.
- */
- $wgCheckFileExtensions = true;
- /**
- * If this is turned off, users may override the warning for files not covered
- * by $wgFileExtensions.
- *
- * @warning Setting this to false is insecure for public wikis.
- */
- $wgStrictFileExtensions = true;
- /**
- * Setting this to true will disable the upload system's checks for HTML/JavaScript.
- *
- * @warning THIS IS VERY DANGEROUS on a publicly editable site, so USE
- * $wgGroupPermissions TO RESTRICT UPLOADING to only those that you trust
- */
- $wgDisableUploadScriptChecks = false;
- /**
- * Warn if uploaded files are larger than this (in bytes), or false to disable
- */
- $wgUploadSizeWarning = false;
- /**
- * list of trusted media-types and mime types.
- * Use the MEDIATYPE_xxx constants to represent media types.
- * This list is used by File::isSafeFile
- *
- * Types not listed here will have a warning about unsafe content
- * displayed on the images description page. It would also be possible
- * to use this for further restrictions, like disabling direct
- * [[media:...]] links for non-trusted formats.
- */
- $wgTrustedMediaFormats = array(
- MEDIATYPE_BITMAP, //all bitmap formats
- MEDIATYPE_AUDIO, //all audio formats
- MEDIATYPE_VIDEO, //all plain video formats
- "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
- "application/pdf", //PDF files
- #"application/x-shockwave-flash", //flash/shockwave movie
- );
- /**
- * Plugins for media file type handling.
- * Each entry in the array maps a MIME type to a class name
- */
- $wgMediaHandlers = array(
- 'image/jpeg' => 'JpegHandler',
- 'image/png' => 'PNGHandler',
- 'image/gif' => 'GIFHandler',
- 'image/tiff' => 'TiffHandler',
- 'image/x-ms-bmp' => 'BmpHandler',
- 'image/x-bmp' => 'BmpHandler',
- 'image/x-xcf' => 'XCFHandler',
- 'image/svg+xml' => 'SvgHandler', // official
- 'image/svg' => 'SvgHandler', // compat
- 'image/vnd.djvu' => 'DjVuHandler', // official
- 'image/x.djvu' => 'DjVuHandler', // compat
- 'image/x-djvu' => 'DjVuHandler', // compat
- );
- /**
- * Resizing can be done using PHP's internal image libraries or using
- * ImageMagick or another third-party converter, e.g. GraphicMagick.
- * These support more file formats than PHP, which only supports PNG,
- * GIF, JPG, XBM and WBMP.
- *
- * Use Image Magick instead of PHP builtin functions.
- */
- $wgUseImageMagick = false;
- /** The convert command shipped with ImageMagick */
- $wgImageMagickConvertCommand = '/usr/bin/convert';
- /** The identify command shipped with ImageMagick */
- $wgImageMagickIdentifyCommand = '/usr/bin/identify';
- /** Sharpening parameter to ImageMagick */
- $wgSharpenParameter = '0x0.4';
- /** Reduction in linear dimensions below which sharpening will be enabled */
- $wgSharpenReductionThreshold = 0.85;
- /**
- * Temporary directory used for ImageMagick. The directory must exist. Leave
- * this set to false to let ImageMagick decide for itself.
- */
- $wgImageMagickTempDir = false;
- /**
- * Use another resizing converter, e.g. GraphicMagick
- * %s will be replaced with the source path, %d with the destination
- * %w and %h will be replaced with the width and height.
- *
- * @par Example for GraphicMagick:
- * @code
- * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
- * @endcode
- *
- * Leave as false to skip this.
- */
- $wgCustomConvertCommand = false;
- /**
- * Some tests and extensions use exiv2 to manipulate the EXIF metadata in some
- * image formats.
- */
- $wgExiv2Command = '/usr/bin/exiv2';
- /**
- * Scalable Vector Graphics (SVG) may be uploaded as images.
- * Since SVG support is not yet standard in browsers, it is
- * necessary to rasterize SVGs to PNG as a fallback format.
- *
- * An external program is required to perform this conversion.
- * If set to an array, the first item is a PHP callable and any further items
- * are passed as parameters after $srcPath, $dstPath, $width, $height
- */
- $wgSVGConverters = array(
- 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
- 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
- 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
- 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
- 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
- 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
- 'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ),
- );
- /** Pick a converter defined in $wgSVGConverters */
- $wgSVGConverter = 'ImageMagick';
- /** If not in the executable PATH, specify the SVG converter path. */
- $wgSVGConverterPath = '';
- /** Don't scale a SVG larger than this */
- $wgSVGMaxSize = 2048;
- /** Don't read SVG metadata beyond this point.
- * Default is 1024*256 bytes
- */
- $wgSVGMetadataCutoff = 262144;
- /**
- * Disallow <title> element in SVG files.
- *
- * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic
- * browsers which can not perform basic stuff like MIME detection and which are
- * vulnerable to further idiots uploading crap files as images.
- *
- * When this directive is on, "<title>" will be allowed in files with an
- * "image/svg+xml" MIME type. You should leave this disabled if your web server
- * is misconfigured and doesn't send appropriate MIME types for SVG images.
- */
- $wgAllowTitlesInSVG = false;
- /**
- * The maximum number of pixels a source image can have if it is to be scaled
- * down by a scaler that requires the full source image to be decompressed
- * and stored in decompressed form, before the thumbnail is generated.
- *
- * This provides a limit on memory usage for the decompression side of the
- * image scaler. The limit is used when scaling PNGs with any of the
- * built-in image scalers, such as ImageMagick or GD. It is ignored for
- * JPEGs with ImageMagick, and when using the VipsScaler extension.
- *
- * The default is 50 MB if decompressed to RGBA form, which corresponds to
- * 12.5 million pixels or 3500x3500.
- */
- $wgMaxImageArea = 1.25e7;
- /**
- * Force thumbnailing of animated GIFs above this size to a single
- * frame instead of an animated thumbnail. As of MW 1.17 this limit
- * is checked against the total size of all frames in the animation.
- * It probably makes sense to keep this equal to $wgMaxImageArea.
- */
- $wgMaxAnimatedGifArea = 1.25e7;
- /**
- * Browsers don't support TIFF inline generally...
- * For inline display, we need to convert to PNG or JPEG.
- * Note scaling should work with ImageMagick, but may not with GD scaling.
- *
- * @par Example:
- * @code
- * // PNG is lossless, but inefficient for photos
- * $wgTiffThumbnailType = array( 'png', 'image/png' );
- * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
- * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
- * @endcode
- */
- $wgTiffThumbnailType = false;
- /**
- * If rendered thumbnail files are older than this timestamp, they
- * will be rerendered on demand as if the file didn't already exist.
- * Update if there is some need to force thumbs and SVG rasterizations
- * to rerender, such as fixes to rendering bugs.
- */
- $wgThumbnailEpoch = '20030516000000';
- /**
- * If set, inline scaled images will still produce "<img>" tags ready for
- * output instead of showing an error message.
- *
- * This may be useful if errors are transitory, especially if the site
- * is configured to automatically render thumbnails on request.
- *
- * On the other hand, it may obscure error conditions from debugging.
- * Enable the debug log or the 'thumbnail' log group to make sure errors
- * are logged to a file for review.
- */
- $wgIgnoreImageErrors = false;
- /**
- * Allow thumbnail rendering on page view. If this is false, a valid
- * thumbnail URL is still output, but no file will be created at
- * the target location. This may save some time if you have a
- * thumb.php or 404 handler set up which is faster than the regular
- * webserver(s).
- */
- $wgGenerateThumbnailOnParse = true;
- /**
- * Show thumbnails for old images on the image description page
- */
- $wgShowArchiveThumbnails = true;
- /** Obsolete, always true, kept for compatibility with extensions */
- $wgUseImageResize = true;
- /**
- * If set to true, images that contain certain the exif orientation tag will
- * be rotated accordingly. If set to null, try to auto-detect whether a scaler
- * is available that can rotate.
- */
- $wgEnableAutoRotation = null;
- /**
- * Internal name of virus scanner. This servers as a key to the
- * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
- * null, every file uploaded will be scanned for viruses.
- */
- $wgAntivirus = null;
- /**
- * Configuration for different virus scanners. This an associative array of
- * associative arrays. It contains one setup array per known scanner type.
- * The entry is selected by $wgAntivirus, i.e.
- * valid values for $wgAntivirus are the keys defined in this array.
- *
- * The configuration array for each scanner contains the following keys:
- * "command", "codemap", "messagepattern":
- *
- * "command" is the full command to call the virus scanner - %f will be
- * replaced with the name of the file to scan. If not present, the filename
- * will be appended to the command. Note that this must be overwritten if the
- * scanner is not in the system path; in that case, plase set
- * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
- * path.
- *
- * "codemap" is a mapping of exit code to return codes of the detectVirus
- * function in SpecialUpload.
- * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
- * the scan to be failed. This will pass the file if $wgAntivirusRequired
- * is not set.
- * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
- * the file to have an usupported format, which is probably imune to
- * virusses. This causes the file to pass.
- * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
- * no virus was found.
- * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
- * a virus.
- * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
- *
- * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
- * output. The relevant part should be matched as group one (\1).
- * If not defined or the pattern does not match, the full message is shown to the user.
- */
- $wgAntivirusSetup = array(
- #setup for clamav
- 'clamav' => array (
- 'command' => "clamscan --no-summary ",
- 'codemap' => array (
- "0" => AV_NO_VIRUS, # no virus
- "1" => AV_VIRUS_FOUND, # virus found
- "52" => AV_SCAN_ABORTED, # unsupported file format (probably imune)
- "*" => AV_SCAN_FAILED, # else scan failed
- ),
- 'messagepattern' => '/.*?:(.*)/sim',
- ),
- );
- /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
- $wgAntivirusRequired = true;
- /** Determines if the mime type of uploaded files should be checked */
- $wgVerifyMimeType = true;
- /** Sets the mime type definition file to use by MimeMagic.php. */
- $wgMimeTypeFile = "includes/mime.types";
- #$wgMimeTypeFile= "/etc/mime.types";
- #$wgMimeTypeFile= null; #use built-in defaults only.
- /** Sets the mime type info file to use by MimeMagic.php. */
- $wgMimeInfoFile= "includes/mime.info";
- #$wgMimeInfoFile= null; #use built-in defaults only.
- /**
- * Switch for loading the FileInfo extension by PECL at runtime.
- * This should be used only if fileinfo is installed as a shared object
- * or a dynamic library.
- */
- $wgLoadFileinfoExtension = false;
- /** Sets an external mime detector program. The command must print only
- * the mime type to standard output.
- * The name of the file to process will be appended to the command given here.
- * If not set or NULL, mime_content_type will be used if available.
- *
- * @par Example:
- * @code
- * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
- * @endcode
- */
- $wgMimeDetectorCommand = null;
- /**
- * Switch for trivial mime detection. Used by thumb.php to disable all fancy
- * things, because only a few types of images are needed and file extensions
- * can be trusted.
- */
- $wgTrivialMimeDetection = false;
- /**
- * Additional XML types we can allow via mime-detection.
- * array = ( 'rootElement' => 'associatedMimeType' )
- */
- $wgXMLMimeTypes = array(
- 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
- 'svg' => 'image/svg+xml',
- 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
- 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
- 'html' => 'text/html', // application/xhtml+xml?
- );
- /**
- * Limit images on image description pages to a user-selectable limit. In order
- * to reduce disk usage, limits can only be selected from a list.
- * The user preference is saved as an array offset in the database, by default
- * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
- * change it if you alter the array (see bug 8858).
- * This is the list of settings the user can choose from:
- */
- $wgImageLimits = array(
- array( 320, 240 ),
- array( 640, 480 ),
- array( 800, 600 ),
- array( 1024, 768 ),
- array( 1280, 1024 )
- );
- /**
- * Adjust thumbnails on image pages according to a user setting. In order to
- * reduce disk usage, the values can only be selected from a list. This is the
- * list of settings the user can choose from:
- */
- $wgThumbLimits = array(
- 120,
- 150,
- 180,
- 200,
- 250,
- 300
- );
- /**
- * Default parameters for the "<gallery>" tag
- */
- $wgGalleryOptions = array (
- 'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize
- 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
- 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
- 'captionLength' => 25, // Length of caption to truncate (in characters)
- 'showBytes' => true, // Show the filesize in bytes in categories
- );
- /**
- * Adjust width of upright images when parameter 'upright' is used
- * This allows a nicer look for upright images without the need to fix the width
- * by hardcoded px in wiki sourcecode.
- */
- $wgThumbUpright = 0.75;
- /**
- * Default value for chmoding of new directories.
- */
- $wgDirectoryMode = 0777;
- /**
- * @name DJVU settings
- * @{
- */
- /**
- * Path of the djvudump executable
- * Enable this and $wgDjvuRenderer to enable djvu rendering
- */
- # $wgDjvuDump = 'djvudump';
- $wgDjvuDump = null;
- /**
- * Path of the ddjvu DJVU renderer
- * Enable this and $wgDjvuDump to enable djvu rendering
- */
- # $wgDjvuRenderer = 'ddjvu';
- $wgDjvuRenderer = null;
- /**
- * Path of the djvutxt DJVU text extraction utility
- * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
- */
- # $wgDjvuTxt = 'djvutxt';
- $wgDjvuTxt = null;
- /**
- * Path of the djvutoxml executable
- * This works like djvudump except much, much slower as of version 3.5.
- *
- * For now we recommend you use djvudump instead. The djvuxml output is
- * probably more stable, so we'll switch back to it as soon as they fix
- * the efficiency problem.
- * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
- *
- * @par Example:
- * @code
- * $wgDjvuToXML = 'djvutoxml';
- * @endcode
- */
- $wgDjvuToXML = null;
- /**
- * Shell command for the DJVU post processor
- * Default: pnmtopng, since ddjvu generates ppm output
- * Set this to false to output the ppm file directly.
- */
- $wgDjvuPostProcessor = 'pnmtojpeg';
- /**
- * File extension for the DJVU post processor output
- */
- $wgDjvuOutputExtension = 'jpg';
- /** @} */ # end of DJvu }
- /** @} */ # end of file uploads }
- /************************************************************************//**
- * @name Email settings
- * @{
- */
- $serverName = substr( $wgServer, strrpos( $wgServer, '/' ) + 1 );
- /**
- * Site admin email address.
- */
- $wgEmergencyContact = 'wikiadmin@' . $serverName;
- /**
- * Password reminder email address.
- *
- * The address we should use as sender when a user is requesting his password.
- */
- $wgPasswordSender = 'apache@' . $serverName;
- unset( $serverName ); # Don't leak local variables to global scope
- /**
- * Password reminder name
- */
- $wgPasswordSenderName = 'MediaWiki Mail';
- /**
- * Dummy address which should be accepted during mail send action.
- * It might be necessary to adapt the address or to set it equal
- * to the $wgEmergencyContact address.
- */
- $wgNoReplyAddress = 'reply@not.possible';
- /**
- * Set to true to enable the e-mail basic features:
- * Password reminders, etc. If sending e-mail on your
- * server doesn't work, you might want to disable this.
- */
- $wgEnableEmail = true;
- /**
- * Set to true to enable user-to-user e-mail.
- * This can potentially be abused, as it's hard to track.
- */
- $wgEnableUserEmail = true;
- /**
- * Set to true to put the sending user's email in a Reply-To header
- * instead of From. ($wgEmergencyContact will be used as From.)
- *
- * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
- * which can cause problems with SPF validation and leak recipient addressses
- * when bounces are sent to the sender.
- */
- $wgUserEmailUseReplyTo = false;
- /**
- * Minimum time, in hours, which must elapse between password reminder
- * emails for a given account. This is to prevent abuse by mail flooding.
- */
- $wgPasswordReminderResendTime = 24;
- /**
- * The time, in seconds, when an emailed temporary password expires.
- */
- $wgNewPasswordExpiry = 3600 * 24 * 7;
- /**
- * The time, in seconds, when an email confirmation email expires
- */
- $wgUserEmailConfirmationTokenExpiry = 7 * 24 * 60 * 60;
- /**
- * SMTP Mode.
- *
- * For using a direct (authenticated) SMTP server connection.
- * Default to false or fill an array :
- *
- * @code
- * $wgSMTP = array(
- * 'host' => 'SMTP domain',
- * 'IDHost' => 'domain for MessageID',
- * 'port' => '25',
- * 'auth' => [true|false],
- * 'username' => [SMTP username],
- * 'password' => [SMTP password],
- * );
- * @endcode
- */
- $wgSMTP = false;
- /**
- * Additional email parameters, will be passed as the last argument to mail() call.
- * If using safe_mode this has no effect
- */
- $wgAdditionalMailParams = null;
- /**
- * True: from page editor if s/he opted-in. False: Enotif mails appear to come
- * from $wgEmergencyContact
- */
- $wgEnotifFromEditor = false;
- // TODO move UPO to preferences probably ?
- # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
- # If set to false, the corresponding input form on the user preference page is suppressed
- # It call this to be a "user-preferences-option (UPO)"
- /**
- * Require email authentication before sending mail to an email address.
- * This is highly recommended. It prevents MediaWiki from being used as an open
- * spam relay.
- */
- $wgEmailAuthentication = true;
- /**
- * Allow users to enable email notification ("enotif") on watchlist changes.
- */
- $wgEnotifWatchlist = false;
- /**
- * Allow users to enable email notification ("enotif") when someone edits their
- * user talk page.
- */
- $wgEnotifUserTalk = false;
- /**
- * Set the Reply-to address in notifications to the editor's address, if user
- * allowed this in the preferences.
- */
- $wgEnotifRevealEditorAddress = false;
- /**
- * Send notification mails on minor edits to watchlist pages. This is enabled
- * by default. Does not affect user talk notifications.
- */
- $wgEnotifMinorEdits = true;
- /**
- * Send a generic mail instead of a personalised mail for each user. This
- * always uses UTC as the time zone, and doesn't include the username.
- *
- * For pages with many users watching, this can significantly reduce mail load.
- * Has no effect when using sendmail rather than SMTP.
- */
- $wgEnotifImpersonal = false;
- /**
- * Maximum number of users to mail at once when using impersonal mail. Should
- * match the limit on your mail server.
- */
- $wgEnotifMaxRecips = 500;
- /**
- * Send mails via the job queue. This can be useful to reduce the time it
- * takes to save a page that a lot of people are watching.
- */
- $wgEnotifUseJobQ = false;
- /**
- * Use real name instead of username in e-mail "from" field.
- */
- $wgEnotifUseRealName = false;
- /**
- * Array of usernames who will be sent a notification email for every change
- * which occurs on a wiki. Users will not be notified of their own changes.
- */
- $wgUsersNotifiedOnAllChanges = array();
- /** @} */ # end of email settings
- /************************************************************************//**
- * @name Database settings
- * @{
- */
- /** Database host name or IP address */
- $wgDBserver = 'localhost';
- /** Database port number (for PostgreSQL) */
- $wgDBport = 5432;
- /** Name of the database */
- $wgDBname = 'my_wiki';
- /** Database username */
- $wgDBuser = 'wikiuser';
- /** Database user's password */
- $wgDBpassword = '';
- /** Database type */
- $wgDBtype = 'mysql';
- /** Whether to use SSL in DB connection. */
- $wgDBssl = false;
- /** Whether to use compression in DB connection. */
- $wgDBcompress = false;
- /** Separate username for maintenance tasks. Leave as null to use the default. */
- $wgDBadminuser = null;
- /** Separate password for maintenance tasks. Leave as null to use the default. */
- $wgDBadminpassword = null;
- /**
- * Search type.
- * Leave as null to select the default search engine for the
- * selected database type (eg SearchMySQL), or set to a class
- * name to override to a custom search engine.
- */
- $wgSearchType = null;
- /** Table name prefix */
- $wgDBprefix = '';
- /** MySQL table options to use during installation or update */
- $wgDBTableOptions = 'ENGINE=InnoDB';
- /**
- * SQL Mode - default is turning off all modes, including strict, if set.
- * null can be used to skip the setting for performance reasons and assume
- * DBA has done his best job.
- * String override can be used for some additional fun :-)
- */
- $wgSQLMode = '';
- /** Mediawiki schema */
- $wgDBmwschema = 'mediawiki';
- /** To override default SQLite data directory ($docroot/../data) */
- $wgSQLiteDataDir = '';
- /**
- * Make all database connections secretly go to localhost. Fool the load balancer
- * thinking there is an arbitrarily large cluster of servers to connect to.
- * Useful for debugging.
- */
- $wgAllDBsAreLocalhost = false;
- /**
- * Shared database for multiple wikis. Commonly used for storing a user table
- * for single sign-on. The server for this database must be the same as for the
- * main database.
- *
- * For backwards compatibility the shared prefix is set to the same as the local
- * prefix, and the user table is listed in the default list of shared tables.
- * The user_properties table is also added so that users will continue to have their
- * preferences shared (preferences were stored in the user table prior to 1.16)
- *
- * $wgSharedTables may be customized with a list of tables to share in the shared
- * datbase. However it is advised to limit what tables you do share as many of
- * MediaWiki's tables may have side effects if you try to share them.
- * EXPERIMENTAL
- *
- * $wgSharedPrefix is the table prefix for the shared database. It defaults to
- * $wgDBprefix.
- */
- $wgSharedDB = null;
- /** @see $wgSharedDB */
- $wgSharedPrefix = false;
- /** @see $wgSharedDB */
- $wgSharedTables = array( 'user', 'user_properties' );
- /**
- * Database load balancer
- * This is a two-dimensional array, an array of server info structures
- * Fields are:
- * - host: Host name
- * - dbname: Default database name
- * - user: DB user
- * - password: DB password
- * - type: "mysql" or "postgres"
- * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
- * - groupLoads: array of load ratios, the key is the query group name. A query may belong
- * to several groups, the most specific group defined here is used.
- *
- * - flags: bit field
- * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
- * - DBO_DEBUG -- equivalent of $wgDebugDumpSql
- * - DBO_TRX -- wrap entire request in a transaction
- * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
- * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
- * - DBO_PERSISTENT -- enables persistent database connections
- * - DBO_SSL -- uses SSL/TLS encryption in database connections, if available
- * - DBO_COMPRESS -- uses internal compression in database connections, if available
- *
- * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
- * - max threads: (optional) Maximum number of running threads
- *
- * These and any other user-defined properties will be assigned to the mLBInfo member
- * variable of the Database object.
- *
- * Leave at false to use the single-server variables above. If you set this
- * variable, the single-server variables will generally be ignored (except
- * perhaps in some command-line scripts).
- *
- * The first server listed in this array (with key 0) will be the master. The
- * rest of the servers will be slaves. To prevent writes to your slaves due to
- * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
- * slaves in my.cnf. You can set read_only mode at runtime using:
- *
- * @code
- * SET @@read_only=1;
- * @endcode
- *
- * Since the effect of writing to a slave is so damaging and difficult to clean
- * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
- * our masters, and then set read_only=0 on masters at runtime.
- */
- $wgDBservers = false;
- /**
- * Load balancer factory configuration
- * To set up a multi-master wiki farm, set the class here to something that
- * can return a LoadBalancer with an appropriate master on a call to getMainLB().
- * The class identified here is responsible for reading $wgDBservers,
- * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
- *
- * The LBFactory_Multi class is provided for this purpose, please see
- * includes/db/LBFactory_Multi.php for configuration information.
- */
- $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
- /** How long to wait for a slave to catch up to the master */
- $wgMasterWaitTimeout = 10;
- /** File to log database errors to */
- $wgDBerrorLog = false;
- /**
- * Timezone to use in the error log.
- * Defaults to the wiki timezone ($wgLocaltimezone).
- *
- * A list of useable timezones can found at:
- * http://php.net/manual/en/timezones.php
- *
- * @par Examples:
- * @code
- * $wgLocaltimezone = 'UTC';
- * $wgLocaltimezone = 'GMT';
- * $wgLocaltimezone = 'PST8PDT';
- * $wgLocaltimezone = 'Europe/Sweden';
- * $wgLocaltimezone = 'CET';
- * @endcode
- *
- * @since 1.20
- */
- $wgDBerrorLogTZ = false;
- /** When to give an error message */
- $wgDBClusterTimeout = 10;
- /**
- * Scale load balancer polling time so that under overload conditions, the
- * database server receives a SHOW STATUS query at an average interval of this
- * many microseconds
- */
- $wgDBAvgStatusPoll = 2000;
- /**
- * Set to true to engage MySQL 4.1/5.0 charset-related features;
- * for now will just cause sending of 'SET NAMES=utf8' on connect.
- *
- * @warning THIS IS EXPERIMENTAL!
- *
- * May break if you're not using the table defs from mysql5/tables.sql.
- * May break if you're upgrading an existing wiki if set differently.
- * Broken symptoms likely to include incorrect behavior with page titles,
- * usernames, comments etc containing non-ASCII characters.
- * Might also cause failures on the object cache and other things.
- *
- * Even correct usage may cause failures with Unicode supplementary
- * characters (those not in the Basic Multilingual Plane) unless MySQL
- * has enhanced their Unicode support.
- */
- $wgDBmysql5 = false;
- /**
- * Other wikis on this site, can be administered from a single developer
- * account.
- * Array numeric key => database name
- */
- $wgLocalDatabases = array();
- /**
- * If lag is higher than $wgSlaveLagWarning, show a warning in some special
- * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
- * show a more obvious warning.
- */
- $wgSlaveLagWarning = 10;
- /** @see $wgSlaveLagWarning */
- $wgSlaveLagCritical = 30;
- /**
- * Use old names for change_tags indices.
- */
- $wgOldChangeTagsIndex = false;
- /**@}*/ # End of DB settings }
- /************************************************************************//**
- * @name Text storage
- * @{
- */
- /**
- * We can also compress text stored in the 'text' table. If this is set on, new
- * revisions will be compressed on page save if zlib support is available. Any
- * compressed revisions will be decompressed on load regardless of this setting
- * *but will not be readable at all* if zlib support is not available.
- */
- $wgCompressRevisions = false;
- /**
- * External stores allow including content
- * from non database sources following URL links.
- *
- * Short names of ExternalStore classes may be specified in an array here:
- * @code
- * $wgExternalStores = array("http","file","custom")...
- * @endcode
- *
- * CAUTION: Access to database might lead to code execution
- */
- $wgExternalStores = false;
- /**
- * An array of external MySQL servers.
- *
- * @par Example:
- * Create a cluster named 'cluster1' containing three servers:
- * @code
- * $wgExternalServers = array(
- * 'cluster1' => array( 'srv28', 'srv29', 'srv30' )
- * );
- * @endcode
- *
- * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to
- * another class.
- */
- $wgExternalServers = array();
- /**
- * The place to put new revisions, false to put them in the local text table.
- * Part of a URL, e.g. DB://cluster1
- *
- * Can be an array instead of a single string, to enable data distribution. Keys
- * must be consecutive integers, starting at zero.
- *
- * @par Example:
- * @code
- * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
- * @endcode
- *
- * @var array
- */
- $wgDefaultExternalStore = false;
- /**
- * Revision text may be cached in $wgMemc to reduce load on external storage
- * servers and object extraction overhead for frequently-loaded revisions.
- *
- * Set to 0 to disable, or number of seconds before cache expiry.
- */
- $wgRevisionCacheExpiry = 0;
- /** @} */ # end text storage }
- /************************************************************************//**
- * @name Performance hacks and limits
- * @{
- */
- /** Disable database-intensive features */
- $wgMiserMode = false;
- /** Disable all query pages if miser mode is on, not just some */
- $wgDisableQueryPages = false;
- /** Number of rows to cache in 'querycache' table when miser mode is on */
- $wgQueryCacheLimit = 1000;
- /** Number of links to a page required before it is deemed "wanted" */
- $wgWantedPagesThreshold = 1;
- /** Enable slow parser functions */
- $wgAllowSlowParserFunctions = false;
- /** Allow schema updates */
- $wgAllowSchemaUpdates = true;
- /**
- * Do DELETE/INSERT for link updates instead of incremental
- */
- $wgUseDumbLinkUpdate = false;
- /**
- * Anti-lock flags - bitfield
- * - ALF_NO_LINK_LOCK:
- * Don't use locking reads when updating the link table. This is
- * necessary for wikis with a high edit rate for performance
- * reasons, but may cause link table inconsistency
- */
- $wgAntiLockFlags = 0;
- /**
- * Maximum article size in kilobytes
- */
- $wgMaxArticleSize = 2048;
- /**
- * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
- * raise PHP's memory limit if it's below this amount.
- */
- $wgMemoryLimit = "50M";
- /** @} */ # end performance hacks }
- /************************************************************************//**
- * @name Cache settings
- * @{
- */
- /**
- * Directory for caching data in the local filesystem. Should not be accessible
- * from the web. Set this to false to not use any local caches.
- *
- * Note: if multiple wikis share the same localisation cache directory, they
- * must all have the same set of extensions. You can set a directory just for
- * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
- */
- $wgCacheDirectory = false;
- /**
- * Main cache type. This should be a cache with fast access, but it may have
- * limited space. By default, it is disabled, since the database is not fast
- * enough to make it worthwhile.
- *
- * The options are:
- *
- * - CACHE_ANYTHING: Use anything, as long as it works
- * - CACHE_NONE: Do not cache
- * - CACHE_DB: Store cache objects in the DB
- * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
- * - CACHE_ACCEL: APC, XCache or WinCache
- * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
- * database. This is slow, and is not recommended for
- * anything other than debugging.
- * - (other): A string may be used which identifies a cache
- * configuration in $wgObjectCaches.
- *
- * @see $wgMessageCacheType, $wgParserCacheType
- */
- $wgMainCacheType = CACHE_NONE;
- /**
- * The cache type for storing the contents of the MediaWiki namespace. This
- * cache is used for a small amount of data which is expensive to regenerate.
- *
- * For available types see $wgMainCacheType.
- */
- $wgMessageCacheType = CACHE_ANYTHING;
- /**
- * The cache type for storing article HTML. This is used to store data which
- * is expensive to regenerate, and benefits from having plenty of storage space.
- *
- * For available types see $wgMainCacheType.
- */
- $wgParserCacheType = CACHE_ANYTHING;
- /**
- * The cache type for storing session data. Used if $wgSessionsInObjectCache is true.
- *
- * For available types see $wgMainCacheType.
- */
- $wgSessionCacheType = CACHE_ANYTHING;
- /**
- * The cache type for storing language conversion tables,
- * which are used when parsing certain text and interface messages.
- *
- * For available types see $wgMainCacheType.
- *
- * @since 1.20
- */
- $wgLanguageConverterCacheType = CACHE_ANYTHING;
- /**
- * Advanced object cache configuration.
- *
- * Use this to define the class names and constructor parameters which are used
- * for the various cache types. Custom cache types may be defined here and
- * referenced from $wgMainCacheType, $wgMessageCacheType, $wgParserCacheType,
- * or $wgLanguageConverterCacheType.
- *
- * The format is an associative array where the key is a cache identifier, and
- * the value is an associative array of parameters. The "class" parameter is the
- * class name which will be used. Alternatively, a "factory" parameter may be
- * given, giving a callable function which will generate a suitable cache object.
- *
- * The other parameters are dependent on the class used.
- * - CACHE_DBA uses $wgTmpDirectory by default. The 'dir' parameter let you
- * overrides that.
- */
- $wgObjectCaches = array(
- CACHE_NONE => array( 'class' => 'EmptyBagOStuff' ),
- CACHE_DB => array( 'class' => 'SqlBagOStuff', 'table' => 'objectcache' ),
- CACHE_DBA => array( 'class' => 'DBABagOStuff' ),
- CACHE_ANYTHING => array( 'factory' => 'ObjectCache::newAnything' ),
- CACHE_ACCEL => array( 'factory' => 'ObjectCache::newAccelerator' ),
- CACHE_MEMCACHED => array( 'factory' => 'ObjectCache::newMemcached' ),
- 'apc' => array( 'class' => 'APCBagOStuff' ),
- 'xcache' => array( 'class' => 'XCacheBagOStuff' ),
- 'wincache' => array( 'class' => 'WinCacheBagOStuff' ),
- 'memcached-php' => array( 'class' => 'MemcachedPhpBagOStuff' ),
- 'memcached-pecl' => array( 'class' => 'MemcachedPeclBagOStuff' ),
- 'hash' => array( 'class' => 'HashBagOStuff' ),
- );
- /**
- * The expiry time for the parser cache, in seconds.
- * The default is 86400 (one day).
- */
- $wgParserCacheExpireTime = 86400;
- /**
- * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php>
- * to use as CACHE_DBA backend.
- */
- $wgDBAhandler = 'db3';
- /**
- * Deprecated alias for $wgSessionsInObjectCache.
- *
- * @deprecated Use $wgSessionsInObjectCache
- */
- $wgSessionsInMemcached = false;
- /**
- * Store sessions in an object cache, configured by $wgSessionCacheType. This
- * can be useful to improve performance, or to avoid the locking behaviour of
- * PHP's default session handler, which tends to prevent multiple requests for
- * the same user from acting concurrently.
- */
- $wgSessionsInObjectCache = false;
- /**
- * The expiry time to use for session storage when $wgSessionsInObjectCache is
- * enabled, in seconds.
- */
- $wgObjectCacheSessionExpiry = 3600;
- /**
- * This is used for setting php's session.save_handler. In practice, you will
- * almost never need to change this ever. Other options might be 'user' or
- * 'session_mysql.' Setting to null skips setting this entirely (which might be
- * useful if you're doing cross-application sessions, see bug 11381)
- */
- $wgSessionHandler = null;
- /** If enabled, will send MemCached debugging information to $wgDebugLogFile */
- $wgMemCachedDebug = false;
- /** The list of MemCached servers and port numbers */
- $wgMemCachedServers = array( '127.0.0.1:11000' );
- /**
- * Use persistent connections to MemCached, which are shared across multiple
- * requests.
- */
- $wgMemCachedPersistent = false;
- /**
- * Read/write timeout for MemCached server communication, in microseconds.
- */
- $wgMemCachedTimeout = 500000;
- /**
- * Set this to true to make a local copy of the message cache, for use in
- * addition to memcached. The files will be put in $wgCacheDirectory.
- */
- $wgUseLocalMessageCache = false;
- /**
- * Defines format of local cache.
- * - true: Serialized object
- * - false: PHP source file (Warning - security risk)
- */
- $wgLocalMessageCacheSerialized = true;
- /**
- * Instead of caching everything, keep track which messages are requested and
- * load only most used messages. This only makes sense if there is lots of
- * interface messages customised in the wiki (like hundreds in many languages).
- */
- $wgAdaptiveMessageCache = false;
- /**
- * Localisation cache configuration. Associative array with keys:
- * class: The class to use. May be overridden by extensions.
- *
- * store: The location to store cache data. May be 'files', 'db' or
- * 'detect'. If set to "files", data will be in CDB files. If set
- * to "db", data will be stored to the database. If set to
- * "detect", files will be used if $wgCacheDirectory is set,
- * otherwise the database will be used.
- *
- * storeClass: The class name for the underlying storage. If set to a class
- * name, it overrides the "store" setting.
- *
- * storeDirectory: If the store class puts its data in files, this is the
- * directory it will use. If this is false, $wgCacheDirectory
- * will be used.
- *
- * manualRecache: Set this to true to disable cache updates on web requests.
- * Use maintenance/rebuildLocalisationCache.php instead.
- */
- $wgLocalisationCacheConf = array(
- 'class' => 'LocalisationCache',
- 'store' => 'detect',
- 'storeClass' => false,
- 'storeDirectory' => false,
- 'manualRecache' => false,
- );
- /** Allow client-side caching of pages */
- $wgCachePages = true;
- /**
- * Set this to current time to invalidate all prior cached pages. Affects both
- * client-side and server-side caching.
- * You can get the current date on your server by using the command:
- * @verbatim
- * date +%Y%m%d%H%M%S
- * @endverbatim
- */
- $wgCacheEpoch = '20030516000000';
- /**
- * Bump this number when changing the global style sheets and JavaScript.
- *
- * It should be appended in the query string of static CSS and JS includes,
- * to ensure that client-side caches do not keep obsolete copies of global
- * styles.
- */
- $wgStyleVersion = '303';
- /**
- * This will cache static pages for non-logged-in users to reduce
- * database traffic on public sites.
- * Must set $wgShowIPinHeader = false
- * ResourceLoader requests to default language and skins are cached
- * as well as single module requests.
- */
- $wgUseFileCache = false;
- /**
- * Depth of the subdirectory hierarchy to be created under
- * $wgFileCacheDirectory. The subdirectories will be named based on
- * the MD5 hash of the title. A value of 0 means all cache files will
- * be put directly into the main file cache directory.
- */
- $wgFileCacheDepth = 2;
- /**
- * Keep parsed pages in a cache (objectcache table or memcached)
- * to speed up output of the same page viewed by another user with the
- * same options.
- *
- * This can provide a significant speedup for medium to large pages,
- * so you probably want to keep it on. Extensions that conflict with the
- * parser cache should disable the cache on a per-page basis instead.
- */
- $wgEnableParserCache = true;
- /**
- * Append a configured value to the parser cache and the sitenotice key so
- * that they can be kept separate for some class of activity.
- */
- $wgRenderHashAppend = '';
- /**
- * If on, the sidebar navigation links are cached for users with the
- * current language set. This can save a touch of load on a busy site
- * by shaving off extra message lookups.
- *
- * However it is also fragile: changing the site configuration, or
- * having a variable $wgArticlePath, can produce broken links that
- * don't update as expected.
- */
- $wgEnableSidebarCache = false;
- /**
- * Expiry time for the sidebar cache, in seconds
- */
- $wgSidebarCacheExpiry = 86400;
- /**
- * When using the file cache, we can store the cached HTML gzipped to save disk
- * space. Pages will then also be served compressed to clients that support it.
- *
- * Requires zlib support enabled in PHP.
- */
- $wgUseGzip = false;
- /**
- * Whether MediaWiki should send an ETag header. Seems to cause
- * broken behavior with Squid 2.6, see bug 7098.
- */
- $wgUseETag = false;
- /** Clock skew or the one-second resolution of time() can occasionally cause cache
- * problems when the user requests two pages within a short period of time. This
- * variable adds a given number of seconds to vulnerable timestamps, thereby giving
- * a grace period.
- */
- $wgClockSkewFudge = 5;
- /**
- * Invalidate various caches when LocalSettings.php changes. This is equivalent
- * to setting $wgCacheEpoch to the modification time of LocalSettings.php, as
- * was previously done in the default LocalSettings.php file.
- *
- * On high-traffic wikis, this should be set to false, to avoid the need to
- * check the file modification time, and to avoid the performance impact of
- * unnecessary cache invalidations.
- */
- $wgInvalidateCacheOnLocalSettingsChange = true;
- /** @} */ # end of cache settings
- /************************************************************************//**
- * @name HTTP proxy (Squid) settings
- *
- * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
- * although they are referred to as Squid settings for historical reasons.
- *
- * Achieving a high hit ratio with an HTTP proxy requires special
- * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
- * more details.
- *
- * @{
- */
- /**
- * Enable/disable Squid.
- * See http://www.mediawiki.org/wiki/Manual:Squid_caching
- */
- $wgUseSquid = false;
- /** If you run Squid3 with ESI support, enable this (default:false): */
- $wgUseESI = false;
- /** Send X-Vary-Options header for better caching (requires patched Squid) */
- $wgUseXVO = false;
- /** Add X-Forwarded-Proto to the Vary and X-Vary-Options headers for API
- * requests and RSS/Atom feeds. Use this if you have an SSL termination setup
- * and need to split the cache between HTTP and HTTPS for API requests,
- * feed requests and HTTP redirect responses in order to prevent cache
- * pollution. This does not affect 'normal' requests to index.php other than
- * HTTP redirects.
- */
- $wgVaryOnXFP = false;
- /**
- * Internal server name as known to Squid, if different.
- *
- * @par Example:
- * @code
- * $wgInternalServer = 'http://yourinternal.tld:8000';
- * @endcode
- */
- $wgInternalServer = false;
- /**
- * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
- * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
- * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
- * days
- */
- $wgSquidMaxage = 18000;
- /**
- * Default maximum age for raw CSS/JS accesses
- */
- $wgForcedRawSMaxage = 300;
- /**
- * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
- *
- * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
- * headers sent/modified from these proxies when obtaining the remote IP address
- *
- * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
- */
- $wgSquidServers = array();
- /**
- * As above, except these servers aren't purged on page changes; use to set a
- * list of trusted proxies, etc.
- */
- $wgSquidServersNoPurge = array();
- /** Maximum number of titles to purge in any one client operation */
- $wgMaxSquidPurgeTitles = 400;
- /**
- * Routing configuration for HTCP multicast purging. Add elements here to
- * enable HTCP and determine which purges are sent where. If set to an empty
- * array, HTCP is disabled.
- *
- * Each key in this array is a regular expression to match against the purged
- * URL, or an empty string to match all URLs. The purged URL is matched against
- * the regexes in the order specified, and the first rule whose regex matches
- * is used.
- *
- * Example configuration to send purges for upload.wikimedia.org to one
- * multicast group and all other purges to another:
- * @code
- * $wgHTCPMulticastRouting = array(
- * '|^https?://upload\.wikimedia\.org|' => array(
- * 'host' => '239.128.0.113',
- * 'port' => 4827,
- * ),
- * '' => array(
- * 'host' => '239.128.0.112',
- * 'port' => 4827,
- * ),
- * );
- * @endcode
- *
- * @since 1.20
- *
- * @see $wgHTCPMulticastTTL
- */
- $wgHTCPMulticastRouting = array();
- /**
- * HTCP multicast address. Set this to a multicast IP address to enable HTCP.
- *
- * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
- * present in the earliest Squid implementations of the protocol.
- *
- * This setting is DEPRECATED in favor of $wgHTCPMulticastRouting , and kept
- * for backwards compatibility only. If $wgHTCPMulticastRouting is set, this
- * setting is ignored. If $wgHTCPMulticastRouting is not set and this setting
- * is, it is used to populate $wgHTCPMulticastRouting.
- *
- * @deprecated in favor of $wgHTCPMulticastRouting
- */
- $wgHTCPMulticastAddress = false;
- /**
- * HTCP multicast port.
- * @deprecated in favor of $wgHTCPMulticastRouting
- * @see $wgHTCPMulticastAddress
- */
- $wgHTCPPort = 4827;
- /**
- * HTCP multicast TTL.
- * @see $wgHTCPMulticastRouting
- */
- $wgHTCPMulticastTTL = 1;
- /** Should forwarded Private IPs be accepted? */
- $wgUsePrivateIPs = false;
- /** @} */ # end of HTTP proxy settings
- /************************************************************************//**
- * @name Language, regional and character encoding settings
- * @{
- */
- /** Site language code, should be one of ./languages/Language(.*).php */
- $wgLanguageCode = 'en';
- /**
- * Some languages need different word forms, usually for different cases.
- * Used in Language::convertGrammar().
- *
- * @par Example:
- * @code
- * $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
- * @endcode
- */
- $wgGrammarForms = array();
- /** Treat language links as magic connectors, not inline links */
- $wgInterwikiMagic = true;
- /** Hide interlanguage links from the sidebar */
- $wgHideInterlanguageLinks = false;
- /** List of language names or overrides for default names in Names.php */
- $wgExtraLanguageNames = array();
- /**
- * List of language codes that don't correspond to an actual language.
- * These codes are mostly leftoffs from renames, or other legacy things.
- * This array makes them not appear as a selectable language on the installer,
- * and excludes them when running the transstat.php script.
- */
- $wgDummyLanguageCodes = array(
- 'als' => 'gsw',
- 'bat-smg' => 'sgs',
- 'be-x-old' => 'be-tarask',
- 'bh' => 'bho',
- 'fiu-vro' => 'vro',
- 'no' => 'nb',
- 'qqq' => 'qqq', # Used for message documentation.
- 'qqx' => 'qqx', # Used for viewing message keys.
- 'roa-rup' => 'rup',
- 'simple' => 'en',
- 'zh-classical' => 'lzh',
- 'zh-min-nan' => 'nan',
- 'zh-yue' => 'yue',
- );
- /**
- * Character set for use in the article edit box. Language-specific encodings
- * may be defined.
- *
- * This historic feature is one of the first that was added by former MediaWiki
- * team leader Brion Vibber, and is used to support the Esperanto x-system.
- */
- $wgEditEncoding = '';
- /**
- * Set this to true to replace Arabic presentation forms with their standard
- * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
- * set to "ar".
- *
- * Note that pages with titles containing presentation forms will become
- * inaccessible, run maintenance/cleanupTitles.php to fix this.
- */
- $wgFixArabicUnicode = true;
- /**
- * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
- * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
- * set to "ml". Note that some clients (even new clients as of 2010) do not
- * support these characters.
- *
- * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
- * fix any ZWJ sequences in existing page titles.
- */
- $wgFixMalayalamUnicode = true;
- /**
- * Set this to always convert certain Unicode sequences to modern ones
- * regardless of the content language. This has a small performance
- * impact.
- *
- * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
- * details.
- *
- * @since 1.17
- */
- $wgAllUnicodeFixes = false;
- /**
- * Set this to eg 'ISO-8859-1' to perform character set conversion when
- * loading old revisions not marked with "utf-8" flag. Use this when
- * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
- * burdensome mass conversion of old text data.
- *
- * @note This DOES NOT touch any fields other than old_text. Titles, comments,
- * user names, etc still must be converted en masse in the database before
- * continuing as a UTF-8 wiki.
- */
- $wgLegacyEncoding = false;
- /**
- * Browser Blacklist for unicode non compliant browsers. Contains a list of
- * regexps : "/regexp/" matching problematic browsers. These browsers will
- * be served encoded unicode in the edit box instead of real unicode.
- */
- $wgBrowserBlackList = array(
- /**
- * Netscape 2-4 detection
- * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
- * Lots of non-netscape user agents have "compatible", so it's useful to check for that
- * with a negative assertion. The [UIN] identifier specifies the level of security
- * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
- * The language string is unreliable, it is missing on NS4 Mac.
- *
- * Reference: http://www.psychedelix.com/agents/index.shtml
- */
- '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
- '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
- '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
- /**
- * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
- *
- * Known useragents:
- * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
- * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
- * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
- * - [...]
- *
- * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
- * @link http://en.wikipedia.org/wiki/Template%3AOS9
- */
- '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
- /**
- * Google wireless transcoder, seems to eat a lot of chars alive
- * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
- */
- '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
- );
- /**
- * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
- * create stub reference rows in the text table instead of copying
- * the full text of all current entries from 'cur' to 'text'.
- *
- * This will speed up the conversion step for large sites, but
- * requires that the cur table be kept around for those revisions
- * to remain viewable.
- *
- * maintenance/migrateCurStubs.php can be used to complete the
- * migration in the background once the wiki is back online.
- *
- * This option affects the updaters *only*. Any present cur stub
- * revisions will be readable at runtime regardless of this setting.
- */
- $wgLegacySchemaConversion = false;
- /**
- * Enable to allow rewriting dates in page text.
- * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
- */
- $wgUseDynamicDates = false;
- /**
- * Enable dates like 'May 12' instead of '12 May', this only takes effect if
- * the interface is set to English.
- */
- $wgAmericanDates = false;
- /**
- * For Hindi and Arabic use local numerals instead of Western style (0-9)
- * numerals in interface.
- */
- $wgTranslateNumerals = true;
- /**
- * Translation using MediaWiki: namespace.
- * Interface messages will be loaded from the database.
- */
- $wgUseDatabaseMessages = true;
- /**
- * Expiry time for the message cache key
- */
- $wgMsgCacheExpiry = 86400;
- /**
- * Maximum entry size in the message cache, in bytes
- */
- $wgMaxMsgCacheEntrySize = 10000;
- /** Whether to enable language variant conversion. */
- $wgDisableLangConversion = false;
- /** Whether to enable language variant conversion for links. */
- $wgDisableTitleConversion = false;
- /** Whether to enable cononical language links in meta data. */
- $wgCanonicalLanguageLinks = true;
- /** Default variant code, if false, the default will be the language code */
- $wgDefaultLanguageVariant = false;
- /**
- * Disabled variants array of language variant conversion.
- *
- * @par Example:
- * @code
- * $wgDisabledVariants[] = 'zh-mo';
- * $wgDisabledVariants[] = 'zh-my';
- * @endcode
- */
- $wgDisabledVariants = array();
- /**
- * Like $wgArticlePath, but on multi-variant wikis, this provides a
- * path format that describes which parts of the URL contain the
- * language variant.
- *
- * @par Example:
- * @code
- * $wgLanguageCode = 'sr';
- * $wgVariantArticlePath = '/$2/$1';
- * $wgArticlePath = '/wiki/$1';
- * @endcode
- *
- * A link to /wiki/ would be redirected to /sr/Главна_страна
- *
- * It is important that $wgArticlePath not overlap with possible values
- * of $wgVariantArticlePath.
- */
- $wgVariantArticlePath = false;
- /**
- * Show a bar of language selection links in the user login and user
- * registration forms; edit the "loginlanguagelinks" message to
- * customise these.
- */
- $wgLoginLanguageSelector = false;
- /**
- * When translating messages with wfMessage(), it is not always clear what
- * should be considered UI messages and what should be content messages.
- *
- * For example, for the English Wikipedia, there should be only one 'mainpage',
- * so when getting the link for 'mainpage', we should treat it as site content
- * and call ->inContentLanguage()->text(), but for rendering the text of the
- * link, we call ->text(). The code behaves this way by default. However,
- * sites like the Wikimedia Commons do offer different versions of 'mainpage'
- * and the like for different languages. This array provides a way to override
- * the default behavior.
- *
- * @par Example:
- * To allow language-specific main page and community
- * portal:
- * @code
- * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
- * @endcode
- */
- $wgForceUIMsgAsContentMsg = array();
- /**
- * Fake out the timezone that the server thinks it's in. This will be used for
- * date display and not for what's stored in the DB. Leave to null to retain
- * your server's OS-based timezone value.
- *
- * This variable is currently used only for signature formatting and for local
- * time/date parser variables ({{LOCALTIME}} etc.)
- *
- * Timezones can be translated by editing MediaWiki messages of type
- * timezone-nameinlowercase like timezone-utc.
- *
- * A list of useable timezones can found at:
- * http://php.net/manual/en/timezones.php
- *
- * @par Examples:
- * @code
- * $wgLocaltimezone = 'UTC';
- * $wgLocaltimezone = 'GMT';
- * $wgLocaltimezone = 'PST8PDT';
- * $wgLocaltimezone = 'Europe/Sweden';
- * $wgLocaltimezone = 'CET';
- * @endcode
- */
- $wgLocaltimezone = null;
- /**
- * Set an offset from UTC in minutes to use for the default timezone setting
- * for anonymous users and new user accounts.
- *
- * This setting is used for most date/time displays in the software, and is
- * overrideable in user preferences. It is *not* used for signature timestamps.
- *
- * By default, this will be set to match $wgLocaltimezone.
- */
- $wgLocalTZoffset = null;
- /**
- * If set to true, this will roll back a few bug fixes introduced in 1.19,
- * emulating the 1.18 behaviour, to avoid introducing bug 34832. In 1.19,
- * language variant conversion is disabled in interface messages. Setting this
- * to true re-enables it.
- *
- * @todo This variable should be removed (implicitly false) in 1.20 or earlier.
- */
- $wgBug34832TransitionalRollback = true;
- /** @} */ # End of language/charset settings
- /*************************************************************************//**
- * @name Output format and skin settings
- * @{
- */
- /** The default Content-Type header. */
- $wgMimeType = 'text/html';
- /**
- * The content type used in script tags. This is mostly going to be ignored if
- * $wgHtml5 is true, at least for actual HTML output, since HTML5 doesn't
- * require a MIME type for JavaScript or CSS (those are the default script and
- * style languages).
- */
- $wgJsMimeType = 'text/javascript';
- /**
- * The HTML document type. Ignored if $wgHtml5 is true, since <!DOCTYPE html>
- * doesn't actually have a doctype part to put this variable's contents in.
- */
- $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
- /**
- * The URL of the document type declaration. Ignored if $wgHtml5 is true,
- * since HTML5 has no DTD, and <!DOCTYPE html> doesn't actually have a DTD part
- * to put this variable's contents in.
- */
- $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
- /**
- * The default xmlns attribute. Ignored if $wgHtml5 is true (or it's supposed
- * to be), since we don't currently support XHTML5, and in HTML5 (i.e., served
- * as text/html) the attribute has no effect, so why bother?
- */
- $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
- /**
- * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
- * instead, and disable HTML5 features. This may eventually be removed and set
- * to always true. If it's true, a number of other settings will be irrelevant
- * and have no effect.
- */
- $wgHtml5 = true;
- /**
- * Defines the value of the version attribute in the <html> tag, if any.
- * This is ignored if $wgHtml5 is false. If $wgAllowRdfaAttributes and
- * $wgHtml5 are both true, and this evaluates to boolean false (like if it's
- * left at the default null value), it will be auto-initialized to the correct
- * value for RDFa+HTML5. As such, you should have no reason to ever actually
- * set this to anything.
- */
- $wgHtml5Version = null;
- /**
- * Enabled RDFa attributes for use in wikitext.
- * NOTE: Interaction with HTML5 is somewhat underspecified.
- */
- $wgAllowRdfaAttributes = false;
- /**
- * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
- */
- $wgAllowMicrodataAttributes = false;
- /**
- * Cleanup as much presentational html like valign -> css vertical-align as we can
- */
- $wgCleanupPresentationalAttributes = true;
- /**
- * Should we try to make our HTML output well-formed XML? If set to false,
- * output will be a few bytes shorter, and the HTML will arguably be more
- * readable. If set to true, life will be much easier for the authors of
- * screen-scraping bots, and the HTML will arguably be more readable.
- *
- * Setting this to false may omit quotation marks on some attributes, omit
- * slashes from some self-closing tags, omit some ending tags, etc., where
- * permitted by HTML5. Setting it to true will not guarantee that all pages
- * will be well-formed, although non-well-formed pages should be rare and it's
- * a bug if you find one. Conversely, setting it to false doesn't mean that
- * all XML-y constructs will be omitted, just that they might be.
- *
- * Because of compatibility with screen-scraping bots, and because it's
- * controversial, this is currently left to true by default.
- */
- $wgWellFormedXml = true;
- /**
- * Permit other namespaces in addition to the w3.org default.
- *
- * Use the prefix for the key and the namespace for the value.
- *
- * @par Example:
- * @code
- * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
- * @endCode
- * Normally we wouldn't have to define this in the root "<html>"
- * element, but IE needs it there in some circumstances.
- *
- * This is ignored if $wgHtml5 is true, for the same reason as
- * $wgXhtmlDefaultNamespace.
- */
- $wgXhtmlNamespaces = array();
- /**
- * Show IP address, for non-logged in users. It's necessary to switch this off
- * for some forms of caching.
- * @warning Will disable file cache.
- */
- $wgShowIPinHeader = true;
- /**
- * Site notice shown at the top of each page
- *
- * MediaWiki:Sitenotice page, which will override this. You can also
- * provide a separate message for logged-out users using the
- * MediaWiki:Anonnotice page.
- */
- $wgSiteNotice = '';
- /**
- * A subtitle to add to the tagline, for skins that have it/
- */
- $wgExtraSubtitle = '';
- /**
- * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
- */
- $wgSiteSupportPage = '';
- /**
- * Validate the overall output using tidy and refuse
- * to display the page if it's not valid.
- */
- $wgValidateAllHtml = false;
- /**
- * Default skin, for new users and anonymous visitors. Registered users may
- * change this to any one of the other available skins in their preferences.
- * This has to be completely lowercase; see the "skins" directory for the list
- * of available skins.
- */
- $wgDefaultSkin = 'vector';
- /**
- * Specify the name of a skin that should not be presented in the list of
- * available skins. Use for blacklisting a skin which you do not want to
- * remove from the .../skins/ directory
- */
- $wgSkipSkin = '';
- /** Array for more like $wgSkipSkin. */
- $wgSkipSkins = array();
- /**
- * Optionally, we can specify a stylesheet to use for media="handheld".
- * This is recognized by some, but not all, handheld/mobile/PDA browsers.
- * If left empty, compliant handheld browsers won't pick up the skin
- * stylesheet, which is specified for 'screen' media.
- *
- * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
- * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
- *
- * Will also be switched in when 'handheld=yes' is added to the URL, like
- * the 'printable=yes' mode for print media.
- */
- $wgHandheldStyle = false;
- /**
- * If set, 'screen' and 'handheld' media specifiers for stylesheets are
- * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
- * which doesn't recognize 'handheld' but does support media queries on its
- * screen size.
- *
- * Consider only using this if you have a *really good* handheld stylesheet,
- * as iPhone users won't have any way to disable it and use the "grown-up"
- * styles instead.
- */
- $wgHandheldForIPhone = false;
- /**
- * Allow user Javascript page?
- * This enables a lot of neat customizations, but may
- * increase security risk to users and server load.
- */
- $wgAllowUserJs = false;
- /**
- * Allow user Cascading Style Sheets (CSS)?
- * This enables a lot of neat customizations, but may
- * increase security risk to users and server load.
- */
- $wgAllowUserCss = false;
- /**
- * Allow user-preferences implemented in CSS?
- * This allows users to customise the site appearance to a greater
- * degree; disabling it will improve page load times.
- */
- $wgAllowUserCssPrefs = true;
- /** Use the site's Javascript page? */
- $wgUseSiteJs = true;
- /** Use the site's Cascading Style Sheets (CSS)? */
- $wgUseSiteCss = true;
- /**
- * Break out of framesets. This can be used to prevent clickjacking attacks,
- * or to prevent external sites from framing your site with ads.
- */
- $wgBreakFrames = false;
- /**
- * The X-Frame-Options header to send on pages sensitive to clickjacking
- * attacks, such as edit pages. This prevents those pages from being displayed
- * in a frame or iframe. The options are:
- *
- * - 'DENY': Do not allow framing. This is recommended for most wikis.
- *
- * - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used
- * to allow framing within a trusted domain. This is insecure if there
- * is a page on the same domain which allows framing of arbitrary URLs.
- *
- * - false: Allow all framing. This opens up the wiki to XSS attacks and thus
- * full compromise of local user accounts. Private wikis behind a
- * corporate firewall are especially vulnerable. This is not
- * recommended.
- *
- * For extra safety, set $wgBreakFrames = true, to prevent framing on all pages,
- * not just edit pages.
- */
- $wgEditPageFrameOptions = 'DENY';
- /**
- * Disallow framing of API pages directly, by setting the X-Frame-Options
- * header. Since the API returns CSRF tokens, allowing the results to be
- * framed can compromise your user's account security.
- * Options are:
- * - 'DENY': Do not allow framing. This is recommended for most wikis.
- * - 'SAMEORIGIN': Allow framing by pages on the same domain.
- * - false: Allow all framing.
- */
- $wgApiFrameOptions = 'DENY';
- /**
- * Disable output compression (enabled by default if zlib is available)
- */
- $wgDisableOutputCompression = false;
- /**
- * Should we allow a broader set of characters in id attributes, per HTML5? If
- * not, use only HTML 4-compatible IDs. This option is for testing -- when the
- * functionality is ready, it will be on by default with no option.
- *
- * Currently this appears to work fine in all browsers, but it's disabled by
- * default because it normalizes id's a bit too aggressively, breaking preexisting
- * content (particularly Cite). See bug 27733, bug 27694, bug 27474.
- */
- $wgExperimentalHtmlIds = false;
- /**
- * Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code
- * You can add new icons to the built in copyright or poweredby, or you can create
- * a new block. Though note that you may need to add some custom css to get good styling
- * of new blocks in monobook. vector and modern should work without any special css.
- *
- * $wgFooterIcons itself is a key/value array.
- * The key is the name of a block that the icons will be wrapped in. The final id varies
- * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
- * turns it into mw_poweredby.
- * The value is either key/value array of icons or a string.
- * In the key/value array the key may or may not be used by the skin but it can
- * be used to find the icon and unset it or change the icon if needed.
- * This is useful for disabling icons that are set by extensions.
- * The value should be either a string or an array. If it is a string it will be output
- * directly as html, however some skins may choose to ignore it. An array is the preferred format
- * for the icon, the following keys are used:
- * - src: An absolute url to the image to use for the icon, this is recommended
- * but not required, however some skins will ignore icons without an image
- * - url: The url to use in the a element arround the text or icon, if not set an a element will not be outputted
- * - alt: This is the text form of the icon, it will be displayed without an image in
- * skins like Modern or if src is not set, and will otherwise be used as
- * the alt="" for the image. This key is required.
- * - width and height: If the icon specified by src is not of the standard size
- * you can specify the size of image to use with these keys.
- * Otherwise they will default to the standard 88x31.
- * @todo Reformat documentation.
- */
- $wgFooterIcons = array(
- "copyright" => array(
- "copyright" => array(), // placeholder for the built in copyright icon
- ),
- "poweredby" => array(
- "mediawiki" => array(
- "src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
- "url" => "//www.mediawiki.org/",
- "alt" => "Powered by MediaWiki",
- )
- ),
- );
- /**
- * Login / create account link behavior when it's possible for anonymous users
- * to create an account.
- * - true = use a combined login / create account link
- * - false = split login and create account into two separate links
- */
- $wgUseCombinedLoginLink = false;
- /**
- * Search form look for Vector skin only.
- * - true = use an icon search button
- * - false = use Go & Search buttons
- */
- $wgVectorUseSimpleSearch = false;
- /**
- * Watch and unwatch as an icon rather than a link for Vector skin only.
- * - true = use an icon watch/unwatch button
- * - false = use watch/unwatch text link
- */
- $wgVectorUseIconWatch = false;
- /**
- * Display user edit counts in various prominent places.
- */
- $wgEdititis = false;
- /**
- * Better directionality support (bug 6100 and related).
- * Removed in 1.18, still kept here for LiquidThreads backwards compatibility.
- *
- * @deprecated since 1.18
- */
- $wgBetterDirectionality = true;
- /**
- * Some web hosts attempt to rewrite all responses with a 404 (not found)
- * status code, mangling or hiding MediaWiki's output. If you are using such a
- * host, you should start looking for a better one. While you're doing that,
- * set this to false to convert some of MediaWiki's 404 responses to 200 so
- * that the generated error pages can be seen.
- *
- * In cases where for technical reasons it is more important for MediaWiki to
- * send the correct status code than for the body to be transmitted intact,
- * this configuration variable is ignored.
- */
- $wgSend404Code = true;
- /**
- * The $wgShowRollbackEditCount variable is used to show how many edits will be
- * rollback. The numeric value of the varible are the limit up to are counted.
- * If the value is false or 0, the edits are not counted.
- *
- * @since 1.20
- */
- $wgShowRollbackEditCount = 10;
- /** @} */ # End of output format settings }
- /*************************************************************************//**
- * @name Resource loader settings
- * @{
- */
- /**
- * Client-side resource modules.
- *
- * Extensions should add their resource loader module definitions
- * to the $wgResourceModules variable.
- *
- * @par Example:
- * @code
- * $wgResourceModules['ext.myExtension'] = array(
- * 'scripts' => 'myExtension.js',
- * 'styles' => 'myExtension.css',
- * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
- * 'localBasePath' => __DIR__,
- * 'remoteExtPath' => 'MyExtension',
- * );
- * @endcode
- */
- $wgResourceModules = array();
- /**
- * Extensions should register foreign module sources here. 'local' is a
- * built-in source that is not in this array, but defined by
- * ResourceLoader::__construct() so that it cannot be unset.
- *
- * @par Example:
- * @code
- * $wgResourceLoaderSources['foo'] = array(
- * 'loadScript' => 'http://example.org/w/load.php',
- * 'apiScript' => 'http://example.org/w/api.php'
- * );
- * @endcode
- */
- $wgResourceLoaderSources = array();
- /**
- * Default 'remoteBasePath' value for instances of ResourceLoaderFileModule.
- * If not set, then $wgScriptPath will be used as a fallback.
- */
- $wgResourceBasePath = null;
- /**
- * Maximum time in seconds to cache resources served by the resource loader.
- *
- * @todo Document array structure
- */
- $wgResourceLoaderMaxage = array(
- 'versioned' => array(
- // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
- 'server' => 30 * 24 * 60 * 60, // 30 days
- // On the client side (e.g. in the browser cache).
- 'client' => 30 * 24 * 60 * 60, // 30 days
- ),
- 'unversioned' => array(
- 'server' => 5 * 60, // 5 minutes
- 'client' => 5 * 60, // 5 minutes
- ),
- );
- /**
- * The default debug mode (on/off) for of ResourceLoader requests.
- *
- * This will still be overridden when the debug URL parameter is used.
- */
- $wgResourceLoaderDebug = false;
- /**
- * Enable embedding of certain resources using Edge Side Includes. This will
- * improve performance but only works if there is something in front of the
- * web server (e..g a Squid or Varnish server) configured to process the ESI.
- */
- $wgResourceLoaderUseESI = false;
- /**
- * Put each statement on its own line when minifying JavaScript. This makes
- * debugging in non-debug mode a bit easier.
- */
- $wgResourceLoaderMinifierStatementsOnOwnLine = false;
- /**
- * Maximum line length when minifying JavaScript. This is not a hard maximum:
- * the minifier will try not to produce lines longer than this, but may be
- * forced to do so in certain cases.
- */
- $wgResourceLoaderMinifierMaxLineLength = 1000;
- /**
- * Whether to include the mediawiki.legacy JS library (old wikibits.js), and its
- * dependencies.
- */
- $wgIncludeLegacyJavaScript = true;
- /**
- * Whether to preload the mediawiki.util module as blocking module in the top
- * queue.
- *
- * Before MediaWiki 1.19, modules used to load slower/less asynchronous which
- * allowed modules to lack dependencies on 'popular' modules that were likely
- * loaded already.
- *
- * This setting is to aid scripts during migration by providing mediawiki.util
- * unconditionally (which was the most commonly missed dependency).
- * It doesn't cover all missing dependencies obviously but should fix most of
- * them.
- *
- * This should be removed at some point after site/user scripts have been fixed.
- * Enable this if your wiki has a large amount of user/site scripts that are
- * lacking dependencies.
- * @todo Deprecate
- */
- $wgPreloadJavaScriptMwUtil = false;
- /**
- * Whether or not to assign configuration variables to the global window object.
- *
- * If this is set to false, old code using deprecated variables will no longer
- * work.
- *
- * @par Example of legacy code:
- * @code{,js}
- * if ( window.wgRestrictionEdit ) { ... }
- * @endcode
- * or:
- * @code{,js}
- * if ( wgIsArticle ) { ... }
- * @endcode
- *
- * Instead, one needs to use mw.config.
- * @par Example using mw.config global configuration:
- * @code{,js}
- * if ( mw.config.exists('wgRestrictionEdit') ) { ... }
- * @endcode
- * or:
- * @code{,js}
- * if ( mw.config.get('wgIsArticle') ) { ... }
- * @endcode
- */
- $wgLegacyJavaScriptGlobals = true;
- /**
- * If set to a positive number, ResourceLoader will not generate URLs whose
- * query string is more than this many characters long, and will instead use
- * multiple requests with shorter query strings. This degrades performance,
- * but may be needed if your web server has a low (less than, say 1024)
- * query string length limit or a low value for suhosin.get.max_value_length
- * that you can't increase.
- *
- * If set to a negative number, ResourceLoader will assume there is no query
- * string length limit.
- */
- $wgResourceLoaderMaxQueryLength = -1;
- /**
- * If set to true, JavaScript modules loaded from wiki pages will be parsed
- * prior to minification to validate it.
- *
- * Parse errors will result in a JS exception being thrown during module load,
- * which avoids breaking other modules loaded in the same request.
- */
- $wgResourceLoaderValidateJS = true;
- /**
- * If set to true, statically-sourced (file-backed) JavaScript resources will
- * be parsed for validity before being bundled up into ResourceLoader modules.
- *
- * This can be helpful for development by providing better error messages in
- * default (non-debug) mode, but JavaScript parsing is slow and memory hungry
- * and may fail on large pre-bundled frameworks.
- */
- $wgResourceLoaderValidateStaticJS = false;
- /**
- * If set to true, asynchronous loading of bottom-queue scripts in the "<head>"
- * will be enabled. This is an experimental feature that's supposed to make
- * JavaScript load faster.
- */
- $wgResourceLoaderExperimentalAsyncLoading = false;
- /** @} */ # End of resource loader settings }
- /*************************************************************************//**
- * @name Page title and interwiki link settings
- * @{
- */
- /**
- * Name of the project namespace. If left set to false, $wgSitename will be
- * used instead.
- */
- $wgMetaNamespace = false;
- /**
- * Name of the project talk namespace.
- *
- * Normally you can ignore this and it will be something like
- * $wgMetaNamespace . "_talk". In some languages, you may want to set this
- * manually for grammatical reasons.
- */
- $wgMetaNamespaceTalk = false;
- /**
- * Additional namespaces. If the namespaces defined in Language.php and
- * Namespace.php are insufficient, you can create new ones here, for example,
- * to import Help files in other languages. You can also override the namespace
- * names of existing namespaces. Extensions developers should use
- * $wgCanonicalNamespaceNames.
- *
- * @warning Once you delete a namespace, the pages in that namespace will
- * no longer be accessible. If you rename it, then you can access them through
- * the new namespace name.
- *
- * Custom namespaces should start at 100 to avoid conflicting with standard
- * namespaces, and should always follow the even/odd main/talk pattern.
- *
- * @par Example:
- * @code
- * $wgExtraNamespaces = array(
- * 100 => "Hilfe",
- * 101 => "Hilfe_Diskussion",
- * 102 => "Aide",
- * 103 => "Discussion_Aide"
- * );
- * @endcode
- *
- * @todo Add a note about maintenance/namespaceDupes.php
- */
- $wgExtraNamespaces = array();
- /**
- * Same as above, but for namespaces with gender distinction.
- * Note: the default form for the namespace should also be set
- * using $wgExtraNamespaces for the same index.
- * @since 1.18
- */
- $wgExtraGenderNamespaces = array();
- /**
- * Namespace aliases.
- *
- * These are alternate names for the primary localised namespace names, which
- * are defined by $wgExtraNamespaces and the language file. If a page is
- * requested with such a prefix, the request will be redirected to the primary
- * name.
- *
- * Set this to a map from namespace names to IDs.
- *
- * @par Example:
- * @code
- * $wgNamespaceAliases = array(
- * 'Wikipedian' => NS_USER,
- * 'Help' => 100,
- * );
- * @endcode
- */
- $wgNamespaceAliases = array();
- /**
- * Allowed title characters -- regex character class
- * Don't change this unless you know what you're doing
- *
- * Problematic punctuation:
- * - []{}|# Are needed for link syntax, never enable these
- * - <> Causes problems with HTML escaping, don't use
- * - % Enabled by default, minor problems with path to query rewrite rules, see below
- * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
- * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
- *
- * All three of these punctuation problems can be avoided by using an alias,
- * instead of a rewrite rule of either variety.
- *
- * The problem with % is that when using a path to query rewrite rule, URLs are
- * double-unescaped: once by Apache's path conversion code, and again by PHP. So
- * %253F, for example, becomes "?". Our code does not double-escape to compensate
- * for this, indeed double escaping would break if the double-escaped title was
- * passed in the query string rather than the path. This is a minor security issue
- * because articles can be created such that they are hard to view or edit.
- *
- * In some rare cases you may wish to remove + for compatibility with old links.
- *
- * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
- * this breaks interlanguage links
- */
- $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
- /**
- * The interwiki prefix of the current wiki, or false if it doesn't have one.
- */
- $wgLocalInterwiki = false;
- /**
- * Expiry time for cache of interwiki table
- */
- $wgInterwikiExpiry = 10800;
- /**
- * @name Interwiki caching settings.
- * @{
- */
- /**
- *$wgInterwikiCache specifies path to constant database file.
- *
- * This cdb database is generated by dumpInterwiki from maintenance and has
- * such key formats:
- * - dbname:key - a simple key (e.g. enwiki:meta)
- * - _sitename:key - site-scope key (e.g. wiktionary:meta)
- * - __global:key - global-scope key (e.g. __global:meta)
- * - __sites:dbname - site mapping (e.g. __sites:enwiki)
- *
- * Sites mapping just specifies site name, other keys provide "local url"
- * data layout.
- */
- $wgInterwikiCache = false;
- /**
- * Specify number of domains to check for messages.
- * - 1: Just wiki(db)-level
- * - 2: wiki and global levels
- * - 3: site levels
- */
- $wgInterwikiScopes = 3;
- /**
- * $wgInterwikiFallbackSite - if unable to resolve from cache
- */
- $wgInterwikiFallbackSite = 'wiki';
- /** @} */ # end of Interwiki caching settings.
- /**
- * If local interwikis are set up which allow redirects,
- * set this regexp to restrict URLs which will be displayed
- * as 'redirected from' links.
- *
- * @par Example:
- * It might look something like this:
- * @code
- * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
- * @endcode
- *
- * Leave at false to avoid displaying any incoming redirect markers.
- * This does not affect intra-wiki redirects, which don't change
- * the URL.
- */
- $wgRedirectSources = false;
- /**
- * Set this to false to avoid forcing the first letter of links to capitals.
- *
- * @warning may break links! This makes links COMPLETELY case-sensitive. Links
- * appearing with a capital at the beginning of a sentence will *not* go to the
- * same place as links in the middle of a sentence using a lowercase initial.
- */
- $wgCapitalLinks = true;
- /**
- * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
- * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
- * true by default (and setting them has no effect), due to various things that
- * require them to be so. Also, since Talk namespaces need to directly mirror their
- * associated content namespaces, the values for those are ignored in favor of the
- * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
- * NS_FILE.
- *
- * @par Example:
- * @code
- * $wgCapitalLinkOverrides[ NS_FILE ] = false;
- * @endcode
- */
- $wgCapitalLinkOverrides = array();
- /** Which namespaces should support subpages?
- * See Language.php for a list of namespaces.
- */
- $wgNamespacesWithSubpages = array(
- NS_TALK => true,
- NS_USER => true,
- NS_USER_TALK => true,
- NS_PROJECT_TALK => true,
- NS_FILE_TALK => true,
- NS_MEDIAWIKI => true,
- NS_MEDIAWIKI_TALK => true,
- NS_TEMPLATE_TALK => true,
- NS_HELP_TALK => true,
- NS_CATEGORY_TALK => true
- );
- /**
- * Array of namespaces which can be deemed to contain valid "content", as far
- * as the site statistics are concerned. Useful if additional namespaces also
- * contain "content" which should be considered when generating a count of the
- * number of articles in the wiki.
- */
- $wgContentNamespaces = array( NS_MAIN );
- /**
- * Max number of redirects to follow when resolving redirects.
- * 1 means only the first redirect is followed (default behavior).
- * 0 or less means no redirects are followed.
- */
- $wgMaxRedirects = 1;
- /**
- * Array of invalid page redirect targets.
- * Attempting to create a redirect to any of the pages in this array
- * will make the redirect fail.
- * Userlogout is hard-coded, so it does not need to be listed here.
- * (bug 10569) Disallow Mypage and Mytalk as well.
- *
- * As of now, this only checks special pages. Redirects to pages in
- * other namespaces cannot be invalidated by this variable.
- */
- $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
- /** @} */ # End of title and interwiki settings }
- /************************************************************************//**
- * @name Parser settings
- * These settings configure the transformation from wikitext to HTML.
- * @{
- */
- /**
- * Parser configuration. Associative array with the following members:
- *
- * class The class name
- *
- * preprocessorClass The preprocessor class. Two classes are currently available:
- * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
- * storage, and Preprocessor_DOM, which uses the DOM module for
- * temporary storage. Preprocessor_DOM generally uses less memory;
- * the speed of the two is roughly the same.
- *
- * If this parameter is not given, it uses Preprocessor_DOM if the
- * DOM module is available, otherwise it uses Preprocessor_Hash.
- *
- * The entire associative array will be passed through to the constructor as
- * the first parameter. Note that only Setup.php can use this variable --
- * the configuration will change at runtime via $wgParser member functions, so
- * the contents of this variable will be out-of-date. The variable can only be
- * changed during LocalSettings.php, in particular, it can't be changed during
- * an extension setup function.
- */
- $wgParserConf = array(
- 'class' => 'Parser',
- #'preprocessorClass' => 'Preprocessor_Hash',
- );
- /** Maximum indent level of toc. */
- $wgMaxTocLevel = 999;
- /**
- * A complexity limit on template expansion: the maximum number of nodes visited
- * by PPFrame::expand()
- */
- $wgMaxPPNodeCount = 1000000;
- /**
- * A complexity limit on template expansion: the maximum number of nodes
- * generated by Preprocessor::preprocessToObj()
- */
- $wgMaxGeneratedPPNodeCount = 1000000;
- /**
- * Maximum recursion depth for templates within templates.
- * The current parser adds two levels to the PHP call stack for each template,
- * and xdebug limits the call stack to 100 by default. So this should hopefully
- * stop the parser before it hits the xdebug limit.
- */
- $wgMaxTemplateDepth = 40;
- /** @see $wgMaxTemplateDepth */
- $wgMaxPPExpandDepth = 40;
- /** The external URL protocols */
- $wgUrlProtocols = array(
- 'http://',
- 'https://',
- 'ftp://',
- 'irc://',
- 'ircs://', // @bug 28503
- 'gopher://',
- 'telnet://', // Well if we're going to support the above.. -ævar
- 'nntp://', // @bug 3808 RFC 1738
- 'worldwind://',
- 'mailto:',
- 'news:',
- 'svn://',
- 'git://',
- 'mms://',
- '//', // for protocol-relative URLs
- );
- /**
- * If true, removes (substitutes) templates in "~~~~" signatures.
- */
- $wgCleanSignatures = true;
- /** Whether to allow inline image pointing to other websites */
- $wgAllowExternalImages = false;
- /**
- * If the above is false, you can specify an exception here. Image URLs
- * that start with this string are then rendered, while all others are not.
- * You can use this to set up a trusted, simple repository of images.
- * You may also specify an array of strings to allow multiple sites
- *
- * @par Examples:
- * @code
- * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
- * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
- * @endcode
- */
- $wgAllowExternalImagesFrom = '';
- /** If $wgAllowExternalImages is false, you can allow an on-wiki
- * whitelist of regular expression fragments to match the image URL
- * against. If the image matches one of the regular expression fragments,
- * The image will be displayed.
- *
- * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
- * Or false to disable it
- */
- $wgEnableImageWhitelist = true;
- /**
- * A different approach to the above: simply allow the "<img>" tag to be used.
- * This allows you to specify alt text and other attributes, copy-paste HTML to
- * your wiki more easily, etc. However, allowing external images in any manner
- * will allow anyone with editing rights to snoop on your visitors' IP
- * addresses and so forth, if they wanted to, by inserting links to images on
- * sites they control.
- */
- $wgAllowImageTag = false;
- /**
- * $wgUseTidy: use tidy to make sure HTML output is sane.
- * Tidy is a free tool that fixes broken HTML.
- * See http://www.w3.org/People/Raggett/tidy/
- *
- * - $wgTidyBin should be set to the path of the binary and
- * - $wgTidyConf to the path of the configuration file.
- * - $wgTidyOpts can include any number of parameters.
- * - $wgTidyInternal controls the use of the PECL extension or the
- * libtidy (PHP >= 5) extension to use an in-process tidy library instead
- * of spawning a separate program.
- * Normally you shouldn't need to override the setting except for
- * debugging. To install, use 'pear install tidy' and add a line
- * 'extension=tidy.so' to php.ini.
- */
- $wgUseTidy = false;
- /** @see $wgUseTidy */
- $wgAlwaysUseTidy = false;
- /** @see $wgUseTidy */
- $wgTidyBin = 'tidy';
- /** @see $wgUseTidy */
- $wgTidyConf = $IP.'/includes/tidy.conf';
- /** @see $wgUseTidy */
- $wgTidyOpts = '';
- /** @see $wgUseTidy */
- $wgTidyInternal = extension_loaded( 'tidy' );
- /**
- * Put tidy warnings in HTML comments
- * Only works for internal tidy.
- */
- $wgDebugTidy = false;
- /** Allow raw, unchecked HTML in "<html>...</html>" sections.
- * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
- * TO RESTRICT EDITING to only those that you trust
- */
- $wgRawHtml = false;
- /**
- * Set a default target for external links, e.g. _blank to pop up a new window
- */
- $wgExternalLinkTarget = false;
- /**
- * If true, external URL links in wiki text will be given the
- * rel="nofollow" attribute as a hint to search engines that
- * they should not be followed for ranking purposes as they
- * are user-supplied and thus subject to spamming.
- */
- $wgNoFollowLinks = true;
- /**
- * Namespaces in which $wgNoFollowLinks doesn't apply.
- * See Language.php for a list of namespaces.
- */
- $wgNoFollowNsExceptions = array();
- /**
- * If this is set to an array of domains, external links to these domain names
- * (or any subdomains) will not be set to rel="nofollow" regardless of the
- * value of $wgNoFollowLinks. For instance:
- *
- * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
- *
- * This would add rel="nofollow" to links to de.wikipedia.org, but not
- * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
- * etc.
- */
- $wgNoFollowDomainExceptions = array();
- /**
- * Allow DISPLAYTITLE to change title display
- */
- $wgAllowDisplayTitle = true;
- /**
- * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
- * canonical DB key.
- */
- $wgRestrictDisplayTitle = true;
- /**
- * Maximum number of calls per parse to expensive parser functions such as
- * PAGESINCATEGORY.
- */
- $wgExpensiveParserFunctionLimit = 100;
- /**
- * Preprocessor caching threshold
- * Setting it to 'false' will disable the preprocessor cache.
- */
- $wgPreprocessorCacheThreshold = 1000;
- /**
- * Enable interwiki transcluding. Only when iw_trans=1.
- */
- $wgEnableScaryTranscluding = false;
- /**
- * (see next option $wgGlobalDatabase).
- */
- $wgTranscludeCacheExpiry = 3600;
- /** @} */ # end of parser settings }
- /************************************************************************//**
- * @name Statistics
- * @{
- */
- /**
- * Method used to determine if a page in a content namespace should be counted
- * as a valid article.
- *
- * Redirect pages will never be counted as valid articles.
- *
- * This variable can have the following values:
- * - 'any': all pages as considered as valid articles
- * - 'comma': the page must contain a comma to be considered valid
- * - 'link': the page must contain a [[wiki link]] to be considered valid
- * - null: the value will be set at run time depending on $wgUseCommaCount:
- * if $wgUseCommaCount is false, it will be 'link', if it is true
- * it will be 'comma'
- *
- * See also See http://www.mediawiki.org/wiki/Manual:Article_count
- *
- * Retroactively changing this variable will not affect the existing count,
- * to update it, you will need to run the maintenance/updateArticleCount.php
- * script.
- */
- $wgArticleCountMethod = null;
- /**
- * Backward compatibility setting, will set $wgArticleCountMethod if it is null.
- * @deprecated since 1.18; use $wgArticleCountMethod instead
- */
- $wgUseCommaCount = false;
- /**
- * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
- * values are easier on the database. A value of 1 causes the counters to be
- * updated on every hit, any higher value n cause them to update *on average*
- * every n hits. Should be set to either 1 or something largish, eg 1000, for
- * maximum efficiency.
- */
- $wgHitcounterUpdateFreq = 1;
- /**
- * How many days user must be idle before he is considered inactive. Will affect
- * the number shown on Special:Statistics and Special:ActiveUsers special page.
- * You might want to leave this as the default value, to provide comparable
- * numbers between different wikis.
- */
- $wgActiveUserDays = 30;
- /** @} */ # End of statistics }
- /************************************************************************//**
- * @name User accounts, authentication
- * @{
- */
- /** For compatibility with old installations set to false */
- $wgPasswordSalt = true;
- /**
- * Specifies the minimal length of a user password. If set to 0, empty pass-
- * words are allowed.
- */
- $wgMinimalPasswordLength = 1;
- /**
- * Whether to allow password resets ("enter some identifying data, and we'll send an email
- * with a temporary password you can use to get back into the account") identified by
- * various bits of data. Setting all of these to false (or the whole variable to false)
- * has the effect of disabling password resets entirely
- */
- $wgPasswordResetRoutes = array(
- 'username' => true,
- 'email' => false,
- );
- /**
- * Maximum number of Unicode characters in signature
- */
- $wgMaxSigChars = 255;
- /**
- * Maximum number of bytes in username. You want to run the maintenance
- * script ./maintenance/checkUsernames.php once you have changed this value.
- */
- $wgMaxNameChars = 255;
- /**
- * Array of usernames which may not be registered or logged in from
- * Maintenance scripts can still use these
- */
- $wgReservedUsernames = array(
- 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
- 'Conversion script', // Used for the old Wikipedia software upgrade
- 'Maintenance script', // Maintenance scripts which perform editing, image import script
- 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
- 'ScriptImporter', // Default user name used by maintenance/importSiteScripts.php
- 'msg:double-redirect-fixer', // Automatic double redirect fix
- 'msg:usermessage-editor', // Default user for leaving user messages
- 'msg:proxyblocker', // For Special:Blockme
- );
- /**
- * Settings added to this array will override the default globals for the user
- * preferences used by anonymous visitors and newly created accounts.
- * For instance, to disable section editing links:
- * $wgDefaultUserOptions ['editsection'] = 0;
- *
- */
- $wgDefaultUserOptions = array(
- 'ccmeonemails' => 0,
- 'cols' => 80,
- 'date' => 'default',
- 'diffonly' => 0,
- 'disablemail' => 0,
- 'disablesuggest' => 0,
- 'editfont' => 'default',
- 'editondblclick' => 0,
- 'editsection' => 1,
- 'editsectiononrightclick' => 0,
- 'enotifminoredits' => 0,
- 'enotifrevealaddr' => 0,
- 'enotifusertalkpages' => 1,
- 'enotifwatchlistpages' => 0,
- 'extendwatchlist' => 0,
- 'externaldiff' => 0,
- 'externaleditor' => 0,
- 'fancysig' => 0,
- 'forceeditsummary' => 0,
- 'gender' => 'unknown',
- 'hideminor' => 0,
- 'hidepatrolled' => 0,
- 'imagesize' => 2,
- 'justify' => 0,
- 'math' => 1,
- 'minordefault' => 0,
- 'newpageshidepatrolled' => 0,
- 'nocache' => 0,
- 'noconvertlink' => 0,
- 'norollbackdiff' => 0,
- 'numberheadings' => 0,
- 'previewonfirst' => 0,
- 'previewontop' => 1,
- 'quickbar' => 5,
- 'rcdays' => 7,
- 'rclimit' => 50,
- 'rememberpassword' => 0,
- 'rows' => 25,
- 'searchlimit' => 20,
- 'showhiddencats' => 0,
- 'showjumplinks' => 1,
- 'shownumberswatching' => 1,
- 'showtoc' => 1,
- 'showtoolbar' => 1,
- 'skin' => false,
- 'stubthreshold' => 0,
- 'thumbsize' => 2,
- 'underline' => 2,
- 'uselivepreview' => 0,
- 'usenewrc' => 0,
- 'watchcreations' => 0,
- 'watchdefault' => 0,
- 'watchdeletion' => 0,
- 'watchlistdays' => 3.0,
- 'watchlisthideanons' => 0,
- 'watchlisthidebots' => 0,
- 'watchlisthideliu' => 0,
- 'watchlisthideminor' => 0,
- 'watchlisthideown' => 0,
- 'watchlisthidepatrolled' => 0,
- 'watchmoves' => 0,
- 'wllimit' => 250,
- );
- /**
- * Whether or not to allow and use real name fields.
- * @deprecated since 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
- * names
- */
- $wgAllowRealName = true;
- /** An array of preferences to not show for the user */
- $wgHiddenPrefs = array();
- /**
- * Characters to prevent during new account creations.
- * This is used in a regular expression character class during
- * registration (regex metacharacters like / are escaped).
- */
- $wgInvalidUsernameCharacters = '@';
- /**
- * Character used as a delimiter when testing for interwiki userrights
- * (In Special:UserRights, it is possible to modify users on different
- * databases if the delimiter is used, e.g. "Someuser@enwiki").
- *
- * It is recommended that you have this delimiter in
- * $wgInvalidUsernameCharacters above, or you will not be able to
- * modify the user rights of those users via Special:UserRights
- */
- $wgUserrightsInterwikiDelimiter = '@';
- /**
- * Use some particular type of external authentication. The specific
- * authentication module you use will normally require some extra settings to
- * be specified.
- *
- * null indicates no external authentication is to be used. Otherwise,
- * $wgExternalAuthType must be the name of a non-abstract class that extends
- * ExternalUser.
- *
- * Core authentication modules can be found in includes/extauth/.
- */
- $wgExternalAuthType = null;
- /**
- * Configuration for the external authentication. This may include arbitrary
- * keys that depend on the authentication mechanism. For instance,
- * authentication against another web app might require that the database login
- * info be provided. Check the file where your auth mechanism is defined for
- * info on what to put here.
- */
- $wgExternalAuthConf = array();
- /**
- * When should we automatically create local accounts when external accounts
- * already exist, if using ExternalAuth? Can have three values: 'never',
- * 'login', 'view'. 'view' requires the external database to support cookies,
- * and implies 'login'.
- *
- * TODO: Implement 'view' (currently behaves like 'login').
- */
- $wgAutocreatePolicy = 'login';
- /**
- * Policies for how each preference is allowed to be changed, in the presence
- * of external authentication. The keys are preference keys, e.g., 'password'
- * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
- * following:
- *
- * - local: Allow changes to this pref through the wiki interface but only
- * apply them locally (default).
- * - semiglobal: Allow changes through the wiki interface and try to apply them
- * to the foreign database, but continue on anyway if that fails.
- * - global: Allow changes through the wiki interface, but only let them go
- * through if they successfully update the foreign database.
- * - message: Allow no local changes for linked accounts; replace the change
- * form with a message provided by the auth plugin, telling the user how to
- * change the setting externally (maybe providing a link, etc.). If the auth
- * plugin provides no message for this preference, hide it entirely.
- *
- * Accounts that are not linked to an external account are never affected by
- * this setting. You may want to look at $wgHiddenPrefs instead.
- * $wgHiddenPrefs supersedes this option.
- *
- * TODO: Implement message, global.
- */
- $wgAllowPrefChange = array();
- /**
- * This is to let user authenticate using https when they come from http.
- * Based on an idea by George Herbert on wikitech-l:
- * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050065.html
- * @since 1.17
- */
- $wgSecureLogin = false;
- /** @} */ # end user accounts }
- /************************************************************************//**
- * @name User rights, access control and monitoring
- * @{
- */
- /**
- * Number of seconds before autoblock entries expire. Default 86400 = 1 day.
- */
- $wgAutoblockExpiry = 86400;
- /**
- * Set this to true to allow blocked users to edit their own user talk page.
- */
- $wgBlockAllowsUTEdit = false;
- /** Allow sysops to ban users from accessing Emailuser */
- $wgSysopEmailBans = true;
- /**
- * Limits on the possible sizes of range blocks.
- *
- * CIDR notation is hard to understand, it's easy to mistakenly assume that a
- * /1 is a small range and a /31 is a large range. For IPv4, setting a limit of
- * half the number of bits avoids such errors, and allows entire ISPs to be
- * blocked using a small number of range blocks.
- *
- * For IPv6, RFC 3177 recommends that a /48 be allocated to every residential
- * customer, so range blocks larger than /64 (half the number of bits) will
- * plainly be required. RFC 4692 implies that a very large ISP may be
- * allocated a /19 if a generous HD-Ratio of 0.8 is used, so we will use that
- * as our limit. As of 2012, blocking the whole world would require a /4 range.
- */
- $wgBlockCIDRLimit = array(
- 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
- 'IPv6' => 19,
- );
- /**
- * If true, blocked users will not be allowed to login. When using this with
- * a public wiki, the effect of logging out blocked users may actually be
- * avers: unless the user's address is also blocked (e.g. auto-block),
- * logging the user out will again allow reading and editing, just as for
- * anonymous visitors.
- */
- $wgBlockDisablesLogin = false;
- /**
- * Pages anonymous user may see, set as an array of pages titles.
- *
- * @par Example:
- * @code
- * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
- * @endcode
- *
- * Special:Userlogin and Special:ChangePassword are always whitelisted.
- *
- * @note This will only work if $wgGroupPermissions['*']['read'] is false --
- * see below. Otherwise, ALL pages are accessible, regardless of this setting.
- *
- * @note Also that this will only protect _pages in the wiki_. Uploaded files
- * will remain readable. You can use img_auth.php to protect uploaded files,
- * see http://www.mediawiki.org/wiki/Manual:Image_Authorization
- */
- $wgWhitelistRead = false;
- /**
- * Should editors be required to have a validated e-mail
- * address before being allowed to edit?
- */
- $wgEmailConfirmToEdit = false;
- /**
- * Permission keys given to users in each group.
- *
- * This is an array where the keys are all groups and each value is an
- * array of the format (right => boolean).
- *
- * The second format is used to support per-namespace permissions.
- * Note that this feature does not fully work for all permission types.
- *
- * All users are implicitly in the '*' group including anonymous visitors;
- * logged-in users are all implicitly in the 'user' group. These will be
- * combined with the permissions of all groups that a given user is listed
- * in in the user_groups table.
- *
- * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
- * doing! This will wipe all permissions, and may mean that your users are
- * unable to perform certain essential tasks or access new functionality
- * when new permissions are introduced and default grants established.
- *
- * Functionality to make pages inaccessible has not been extensively tested
- * for security. Use at your own risk!
- *
- * This replaces $wgWhitelistAccount and $wgWhitelistEdit
- */
- $wgGroupPermissions = array();
- /** @cond file_level_code */
- // Implicit group for all visitors
- $wgGroupPermissions['*']['createaccount'] = true;
- $wgGroupPermissions['*']['read'] = true;
- $wgGroupPermissions['*']['edit'] = true;
- $wgGroupPermissions['*']['createpage'] = true;
- $wgGroupPermissions['*']['createtalk'] = true;
- $wgGroupPermissions['*']['writeapi'] = true;
- //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
- // Implicit group for all logged-in accounts
- $wgGroupPermissions['user']['move'] = true;
- $wgGroupPermissions['user']['move-subpages'] = true;
- $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
- $wgGroupPermissions['user']['movefile'] = true;
- $wgGroupPermissions['user']['read'] = true;
- $wgGroupPermissions['user']['edit'] = true;
- $wgGroupPermissions['user']['createpage'] = true;
- $wgGroupPermissions['user']['createtalk'] = true;
- $wgGroupPermissions['user']['writeapi'] = true;
- $wgGroupPermissions['user']['upload'] = true;
- $wgGroupPermissions['user']['reupload'] = true;
- $wgGroupPermissions['user']['reupload-shared'] = true;
- $wgGroupPermissions['user']['minoredit'] = true;
- $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
- $wgGroupPermissions['user']['sendemail'] = true;
- // Implicit group for accounts that pass $wgAutoConfirmAge
- $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
- // Users with bot privilege can have their edits hidden
- // from various log pages by default
- $wgGroupPermissions['bot']['bot'] = true;
- $wgGroupPermissions['bot']['autoconfirmed'] = true;
- $wgGroupPermissions['bot']['nominornewtalk'] = true;
- $wgGroupPermissions['bot']['autopatrol'] = true;
- $wgGroupPermissions['bot']['suppressredirect'] = true;
- $wgGroupPermissions['bot']['apihighlimits'] = true;
- $wgGroupPermissions['bot']['writeapi'] = true;
- #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
- // Most extra permission abilities go to this group
- $wgGroupPermissions['sysop']['block'] = true;
- $wgGroupPermissions['sysop']['createaccount'] = true;
- $wgGroupPermissions['sysop']['delete'] = true;
- $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
- $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
- $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
- $wgGroupPermissions['sysop']['undelete'] = true;
- $wgGroupPermissions['sysop']['editinterface'] = true;
- $wgGroupPermissions['sysop']['editusercss'] = true;
- $wgGroupPermissions['sysop']['edituserjs'] = true;
- $wgGroupPermissions['sysop']['import'] = true;
- $wgGroupPermissions['sysop']['importupload'] = true;
- $wgGroupPermissions['sysop']['move'] = true;
- $wgGroupPermissions['sysop']['move-subpages'] = true;
- $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
- $wgGroupPermissions['sysop']['patrol'] = true;
- $wgGroupPermissions['sysop']['autopatrol'] = true;
- $wgGroupPermissions['sysop']['protect'] = true;
- $wgGroupPermissions['sysop']['proxyunbannable'] = true;
- $wgGroupPermissions['sysop']['rollback'] = true;
- $wgGroupPermissions['sysop']['upload'] = true;
- $wgGroupPermissions['sysop']['reupload'] = true;
- $wgGroupPermissions['sysop']['reupload-shared'] = true;
- $wgGroupPermissions['sysop']['unwatchedpages'] = true;
- $wgGroupPermissions['sysop']['autoconfirmed'] = true;
- $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
- $wgGroupPermissions['sysop']['blockemail'] = true;
- $wgGroupPermissions['sysop']['markbotedits'] = true;
- $wgGroupPermissions['sysop']['apihighlimits'] = true;
- $wgGroupPermissions['sysop']['browsearchive'] = true;
- $wgGroupPermissions['sysop']['noratelimit'] = true;
- $wgGroupPermissions['sysop']['movefile'] = true;
- $wgGroupPermissions['sysop']['unblockself'] = true;
- $wgGroupPermissions['sysop']['suppressredirect'] = true;
- #$wgGroupPermissions['sysop']['upload_by_url'] = true;
- #$wgGroupPermissions['sysop']['mergehistory'] = true;
- // Permission to change users' group assignments
- $wgGroupPermissions['bureaucrat']['userrights'] = true;
- $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
- // Permission to change users' groups assignments across wikis
- #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
- // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
- #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
- #$wgGroupPermissions['sysop']['deletelogentry'] = true;
- #$wgGroupPermissions['sysop']['deleterevision'] = true;
- // To hide usernames from users and Sysops
- #$wgGroupPermissions['suppress']['hideuser'] = true;
- // To hide revisions/log items from users and Sysops
- #$wgGroupPermissions['suppress']['suppressrevision'] = true;
- // For private suppression log access
- #$wgGroupPermissions['suppress']['suppressionlog'] = true;
- /**
- * The developer group is deprecated, but can be activated if need be
- * to use the 'lockdb' and 'unlockdb' special pages. Those require
- * that a lock file be defined and creatable/removable by the web
- * server.
- */
- # $wgGroupPermissions['developer']['siteadmin'] = true;
- /** @endcond */
- /**
- * Permission keys revoked from users in each group.
- *
- * This acts the same way as wgGroupPermissions above, except that
- * if the user is in a group here, the permission will be removed from them.
- *
- * Improperly setting this could mean that your users will be unable to perform
- * certain essential tasks, so use at your own risk!
- */
- $wgRevokePermissions = array();
- /**
- * Implicit groups, aren't shown on Special:Listusers or somewhere else
- */
- $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
- /**
- * A map of group names that the user is in, to group names that those users
- * are allowed to add or revoke.
- *
- * Setting the list of groups to add or revoke to true is equivalent to "any
- * group".
- *
- * @par Example:
- * To allow sysops to add themselves to the "bot" group:
- * @code
- * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
- * @endcode
- *
- * @par Example:
- * Implicit groups may be used for the source group, for instance:
- * @code
- * $wgGroupsRemoveFromSelf = array( '*' => true );
- * @endcode
- * This allows users in the '*' group (i.e. any user) to remove themselves from
- * any group that they happen to be in.
- *
- */
- $wgGroupsAddToSelf = array();
- /** @see $wgGroupsAddToSelf */
- $wgGroupsRemoveFromSelf = array();
- /**
- * Set of available actions that can be restricted via action=protect
- * You probably shouldn't change this.
- * Translated through restriction-* messages.
- * Title::getRestrictionTypes() will remove restrictions that are not
- * applicable to a specific title (create and upload)
- */
- $wgRestrictionTypes = array( 'create', 'edit', 'move', 'upload' );
- /**
- * Rights which can be required for each protection level (via action=protect)
- *
- * You can add a new protection level that requires a specific
- * permission by manipulating this array. The ordering of elements
- * dictates the order on the protection form's lists.
- *
- * - '' will be ignored (i.e. unprotected)
- * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
- */
- $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
- /**
- * Set the minimum permissions required to edit pages in each
- * namespace. If you list more than one permission, a user must
- * have all of them to edit pages in that namespace.
- *
- * @note NS_MEDIAWIKI is implicitly restricted to 'editinterface'.
- */
- $wgNamespaceProtection = array();
- /**
- * Pages in namespaces in this array can not be used as templates.
- *
- * Elements MUST be numeric namespace ids, you can safely use the MediaWiki
- * namespaces constants (NS_USER, NS_MAIN...).
- *
- * Among other things, this may be useful to enforce read-restrictions
- * which may otherwise be bypassed by using the template machanism.
- */
- $wgNonincludableNamespaces = array();
- /**
- * Number of seconds an account is required to age before it's given the
- * implicit 'autoconfirm' group membership. This can be used to limit
- * privileges of new accounts.
- *
- * Accounts created by earlier versions of the software may not have a
- * recorded creation date, and will always be considered to pass the age test.
- *
- * When left at 0, all registered accounts will pass.
- *
- * @par Example:
- * Set automatic confirmation to 10 minutes (which is 600 seconds):
- * @code
- * $wgAutoConfirmAge = 600; // ten minutes
- * @endcode
- * Set age to one day:
- * @code
- * $wgAutoConfirmAge = 3600*24; // one day
- * @endcode
- */
- $wgAutoConfirmAge = 0;
- /**
- * Number of edits an account requires before it is autoconfirmed.
- * Passing both this AND the time requirement is needed. Example:
- *
- * @par Example:
- * @code
- * $wgAutoConfirmCount = 50;
- * @endcode
- */
- $wgAutoConfirmCount = 0;
- /**
- * Automatically add a usergroup to any user who matches certain conditions.
- *
- * @todo Redocument $wgAutopromote
- *
- * The format is
- * array( '&' or '|' or '^' or '!', cond1, cond2, ... )
- * where cond1, cond2, ... are themselves conditions; *OR*
- * APCOND_EMAILCONFIRMED, *OR*
- * array( APCOND_EMAILCONFIRMED ), *OR*
- * array( APCOND_EDITCOUNT, number of edits ), *OR*
- * array( APCOND_AGE, seconds since registration ), *OR*
- * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
- * array( APCOND_ISIP, ip ), *OR*
- * array( APCOND_IPINRANGE, range ), *OR*
- * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
- * array( APCOND_BLOCKED ), *OR*
- * array( APCOND_ISBOT ), *OR*
- * similar constructs defined by extensions.
- *
- * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
- * user who has provided an e-mail address.
- */
- $wgAutopromote = array(
- 'autoconfirmed' => array( '&',
- array( APCOND_EDITCOUNT, &$wgAutoConfirmCount ),
- array( APCOND_AGE, &$wgAutoConfirmAge ),
- ),
- );
- /**
- * Automatically add a usergroup to any user who matches certain conditions.
- *
- * Does not add the user to the group again if it has been removed.
- * Also, does not remove the group if the user no longer meets the criteria.
- *
- * The format is:
- * @code
- * array( event => criteria, ... )
- * @endcode
- * Where event is either:
- * - 'onEdit' (when user edits)
- * - 'onView' (when user views the wiki)
- *
- * Criteria has the same format as $wgAutopromote
- *
- * @see $wgAutopromote
- * @since 1.18
- */
- $wgAutopromoteOnce = array(
- 'onEdit' => array(),
- 'onView' => array()
- );
- /**
- * Put user rights log entries for autopromotion in recent changes?
- * @since 1.18
- */
- $wgAutopromoteOnceLogInRC = true;
- /**
- * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
- * can assign which groups at Special:Userrights.
- *
- * @par Example:
- * Bureaucrats can add any group:
- * @code
- * $wgAddGroups['bureaucrat'] = true;
- * @endcode
- * Bureaucrats can only remove bots and sysops:
- * @code
- * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
- * @endcode
- * Sysops can make bots:
- * @code
- * $wgAddGroups['sysop'] = array( 'bot' );
- * @endcode
- * Sysops can disable other sysops in an emergency, and disable bots:
- * @code
- * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
- * @endcode
- */
- $wgAddGroups = array();
- /** @see $wgAddGroups */
- $wgRemoveGroups = array();
- /**
- * A list of available rights, in addition to the ones defined by the core.
- * For extensions only.
- */
- $wgAvailableRights = array();
- /**
- * Optional to restrict deletion of pages with higher revision counts
- * to users with the 'bigdelete' permission. (Default given to sysops.)
- */
- $wgDeleteRevisionsLimit = 0;
- /**
- * Number of accounts each IP address may create, 0 to disable.
- *
- * @warning Requires memcached */
- $wgAccountCreationThrottle = 0;
- /**
- * Edits matching these regular expressions in body text
- * will be recognised as spam and rejected automatically.
- *
- * There's no administrator override on-wiki, so be careful what you set. :)
- * May be an array of regexes or a single string for backwards compatibility.
- *
- * @see http://en.wikipedia.org/wiki/Regular_expression
- *
- * @note Each regex needs a beginning/end delimiter, eg: # or /
- */
- $wgSpamRegex = array();
- /** Same as the above except for edit summaries */
- $wgSummarySpamRegex = array();
- /**
- * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open
- * proxies
- * @since 1.16
- */
- $wgEnableDnsBlacklist = false;
- /**
- * @deprecated since 1.17 Use $wgEnableDnsBlacklist instead, only kept for
- * backward compatibility.
- */
- $wgEnableSorbs = false;
- /**
- * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true.
- *
- * This is an array of either a URL or an array with the URL and a key (should
- * the blacklist require a key).
- *
- * @par Example:
- * @code
- * $wgDnsBlacklistUrls = array(
- * // String containing URL
- * 'http.dnsbl.sorbs.net.',
- * // Array with URL and key, for services that require a key
- * array( 'dnsbl.httpbl.net.', 'mykey' ),
- * // Array with just the URL. While this works, it is recommended that you
- * // just use a string as shown above
- * array( 'opm.tornevall.org.' )
- * );
- * @endcode
- *
- * @note You should end the domain name with a . to avoid searching your
- * eventual domain search suffixes.
- * @since 1.16
- */
- $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
- /**
- * @deprecated since 1.17 Use $wgDnsBlacklistUrls instead, only kept for
- * backward compatibility.
- */
- $wgSorbsUrl = array();
- /**
- * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
- * what the other methods might say.
- */
- $wgProxyWhitelist = array();
- /**
- * Simple rate limiter options to brake edit floods.
- *
- * Maximum number actions allowed in the given number of seconds; after that
- * the violating client receives HTTP 500 error pages until the period
- * elapses.
- *
- * @par Example:
- * To set a generic maximum of 4 hits in 60 seconds:
- * @code
- * $wgRateLimits = array( 4, 60 );
- * @endcode
- *
- * You could also limit per action and then type of users. See the inline
- * code for a template to use.
- *
- * This option set is experimental and likely to change.
- *
- * @warning Requires memcached.
- */
- $wgRateLimits = array(
- 'edit' => array(
- 'anon' => null, // for any and all anonymous edits (aggregate)
- 'user' => null, // for each logged-in user
- 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
- 'ip' => null, // for each anon and recent account
- 'subnet' => null, // ... with final octet removed
- ),
- 'move' => array(
- 'user' => null,
- 'newbie' => null,
- 'ip' => null,
- 'subnet' => null,
- ),
- 'mailpassword' => array(
- 'anon' => null,
- ),
- 'emailuser' => array(
- 'user' => null,
- ),
- );
- /**
- * Set to a filename to log rate limiter hits.
- */
- $wgRateLimitLog = null;
- /**
- * Array of IPs which should be excluded from rate limits.
- * This may be useful for whitelisting NAT gateways for conferences, etc.
- */
- $wgRateLimitsExcludedIPs = array();
- /**
- * Log IP addresses in the recentchanges table; can be accessed only by
- * extensions (e.g. CheckUser) or a DB admin
- */
- $wgPutIPinRC = true;
- /**
- * Integer defining default number of entries to show on
- * special pages which are query-pages such as Special:Whatlinkshere.
- */
- $wgQueryPageDefaultLimit = 50;
- /**
- * Limit password attempts to X attempts per Y seconds per IP per account.
- *
- * @warning Requires memcached.
- */
- $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
- /** @} */ # end of user rights settings
- /************************************************************************//**
- * @name Proxy scanner settings
- * @{
- */
- /**
- * If you enable this, every editor's IP address will be scanned for open HTTP
- * proxies.
- *
- * @warning Don't enable this. Many sysops will report "hostile TCP port scans"
- * to your ISP and ask for your server to be shut down.
- * You have been warned.
- *
- */
- $wgBlockOpenProxies = false;
- /** Port we want to scan for a proxy */
- $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
- /** Script used to scan */
- $wgProxyScriptPath = "$IP/maintenance/proxy_check.php";
- /** */
- $wgProxyMemcExpiry = 86400;
- /** This should always be customised in LocalSettings.php */
- $wgSecretKey = false;
- /** big list of banned IP addresses, in the keys not the values */
- $wgProxyList = array();
- /** deprecated */
- $wgProxyKey = false;
- /** @} */ # end of proxy scanner settings
- /************************************************************************//**
- * @name Cookie settings
- * @{
- */
- /**
- * Default cookie expiration time. Setting to 0 makes all cookies session-only.
- */
- $wgCookieExpiration = 180*86400;
- /**
- * Set to set an explicit domain on the login cookies eg, "justthis.domain.org"
- * or ".any.subdomain.net"
- */
- $wgCookieDomain = '';
- /**
- * Set this variable if you want to restrict cookies to a certain path within
- * the domain specified by $wgCookieDomain.
- */
- $wgCookiePath = '/';
- /**
- * Whether the "secure" flag should be set on the cookie. This can be:
- * - true: Set secure flag
- * - false: Don't set secure flag
- * - "detect": Set the secure flag if $wgServer is set to an HTTPS URL
- */
- $wgCookieSecure = 'detect';
- /**
- * By default, MediaWiki checks if the client supports cookies during the
- * login process, so that it can display an informative error message if
- * cookies are disabled. Set this to true if you want to disable this cookie
- * check.
- */
- $wgDisableCookieCheck = false;
- /**
- * Cookies generated by MediaWiki have names starting with this prefix. Set it
- * to a string to use a custom prefix. Setting it to false causes the database
- * name to be used as a prefix.
- */
- $wgCookiePrefix = false;
- /**
- * Set authentication cookies to HttpOnly to prevent access by JavaScript,
- * in browsers that support this feature. This can mitigates some classes of
- * XSS attack.
- */
- $wgCookieHttpOnly = true;
- /**
- * If the requesting browser matches a regex in this blacklist, we won't
- * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
- */
- $wgHttpOnlyBlacklist = array(
- // Internet Explorer for Mac; sometimes the cookies work, sometimes
- // they don't. It's difficult to predict, as combinations of path
- // and expiration options affect its parsing.
- '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
- );
- /** A list of cookies that vary the cache (for use by extensions) */
- $wgCacheVaryCookies = array();
- /** Override to customise the session name */
- $wgSessionName = false;
- /** @} */ # end of cookie settings }
- /************************************************************************//**
- * @name LaTeX (mathematical formulas)
- * @{
- */
- /**
- * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
- * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
- * (ImageMagick) installed and available in the PATH.
- * Please see math/README for more information.
- */
- $wgUseTeX = false;
- /* @} */ # end LaTeX }
- /************************************************************************//**
- * @name Profiling, testing and debugging
- *
- * To enable profiling, edit StartProfiler.php
- *
- * @{
- */
- /**
- * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
- * The debug log file should be not be publicly accessible if it is used, as it
- * may contain private data.
- */
- $wgDebugLogFile = '';
- /**
- * Prefix for debug log lines
- */
- $wgDebugLogPrefix = '';
- /**
- * If true, instead of redirecting, show a page with a link to the redirect
- * destination. This allows for the inspection of PHP error messages, and easy
- * resubmission of form data. For developer use only.
- */
- $wgDebugRedirects = false;
- /**
- * If true, log debugging data from action=raw and load.php.
- * This is normally false to avoid overlapping debug entries due to gen=css
- * and gen=js requests.
- */
- $wgDebugRawPage = false;
- /**
- * Send debug data to an HTML comment in the output.
- *
- * This may occasionally be useful when supporting a non-technical end-user.
- * It's more secure than exposing the debug log file to the web, since the
- * output only contains private data for the current user. But it's not ideal
- * for development use since data is lost on fatal errors and redirects.
- */
- $wgDebugComments = false;
- /**
- * Extensive database transaction state debugging
- *
- * @since 1.20
- */
- $wgDebugDBTransactions = false;
- /**
- * Write SQL queries to the debug log
- */
- $wgDebugDumpSql = false;
- /**
- * Set to an array of log group keys to filenames.
- * If set, wfDebugLog() output for that group will go to that file instead
- * of the regular $wgDebugLogFile. Useful for enabling selective logging
- * in production.
- */
- $wgDebugLogGroups = array();
- /**
- * Display debug data at the bottom of the main content area.
- *
- * Useful for developers and technical users trying to working on a closed wiki.
- */
- $wgShowDebug = false;
- /**
- * Prefix debug messages with relative timestamp. Very-poor man's profiler.
- * Since 1.19 also includes memory usage.
- */
- $wgDebugTimestamps = false;
- /**
- * Print HTTP headers for every request in the debug information.
- */
- $wgDebugPrintHttpHeaders = true;
- /**
- * Show the contents of $wgHooks in Special:Version
- */
- $wgSpecialVersionShowHooks = false;
- /**
- * Whether to show "we're sorry, but there has been a database error" pages.
- * Displaying errors aids in debugging, but may display information useful
- * to an attacker.
- */
- $wgShowSQLErrors = false;
- /**
- * If set to true, uncaught exceptions will print a complete stack trace
- * to output. This should only be used for debugging, as it may reveal
- * private information in function parameters due to PHP's backtrace
- * formatting.
- */
- $wgShowExceptionDetails = false;
- /**
- * If true, show a backtrace for database errors
- */
- $wgShowDBErrorBacktrace = false;
- /**
- * If true, send the exception backtrace to the error log
- */
- $wgLogExceptionBacktrace = true;
- /**
- * Expose backend server host names through the API and various HTML comments
- */
- $wgShowHostnames = false;
- /**
- * Override server hostname detection with a hardcoded value.
- * Should be a string, default false.
- * @since 1.20
- */
- $wgOverrideHostname = false;
- /**
- * If set to true MediaWiki will throw notices for some possible error
- * conditions and for deprecated functions.
- */
- $wgDevelopmentWarnings = false;
- /**
- * Release limitation to wfDeprecated warnings, if set to a release number
- * development warnings will not be generated for deprecations added in releases
- * after the limit.
- */
- $wgDeprecationReleaseLimit = false;
- /** Only record profiling info for pages that took longer than this */
- $wgProfileLimit = 0.0;
- /** Don't put non-profiling info into log file */
- $wgProfileOnly = false;
- /**
- * Log sums from profiling into "profiling" table in db.
- *
- * You have to create a 'profiling' table in your database before using
- * this feature, see maintenance/archives/patch-profiling.sql
- *
- * To enable profiling, edit StartProfiler.php
- */
- $wgProfileToDatabase = false;
- /** If true, print a raw call tree instead of per-function report */
- $wgProfileCallTree = false;
- /** Should application server host be put into profiling table */
- $wgProfilePerHost = false;
- /**
- * Host for UDP profiler.
- *
- * The host should be running a daemon which can be obtained from MediaWiki
- * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
- */
- $wgUDPProfilerHost = '127.0.0.1';
- /**
- * Port for UDP profiler.
- * @see $wgUDPProfilerHost
- */
- $wgUDPProfilerPort = '3811';
- /** Detects non-matching wfProfileIn/wfProfileOut calls */
- $wgDebugProfiling = false;
- /** Output debug message on every wfProfileIn/wfProfileOut */
- $wgDebugFunctionEntry = false;
- /**
- * Destination for wfIncrStats() data...
- * 'cache' to go into the system cache, if enabled (memcached)
- * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
- * false to disable
- */
- $wgStatsMethod = 'cache';
- /**
- * When $wgStatsMethod is 'udp', setting this to a string allows statistics to
- * be aggregated over more than one wiki. The string will be used in place of
- * the DB name in outgoing UDP packets. If this is set to false, the DB name
- * will be used.
- */
- $wgAggregateStatsID = false;
- /** Whereas to count the number of time an article is viewed.
- * Does not work if pages are cached (for example with squid).
- */
- $wgDisableCounters = false;
- /**
- * Set this to an integer to only do synchronous site_stats updates
- * one every *this many* updates. The other requests go into pending
- * delta values in $wgMemc. Make sure that $wgMemc is a global cache.
- * If set to -1, updates *only* go to $wgMemc (useful for daemons).
- */
- $wgSiteStatsAsyncFactor = false;
- /**
- * Parser test suite files to be run by parserTests.php when no specific
- * filename is passed to it.
- *
- * Extensions may add their own tests to this array, or site-local tests
- * may be added via LocalSettings.php
- *
- * Use full paths.
- */
- $wgParserTestFiles = array(
- "$IP/tests/parser/parserTests.txt",
- "$IP/tests/parser/extraParserTests.txt"
- );
- /**
- * If configured, specifies target CodeReview installation to send test
- * result data from 'parserTests.php --upload'
- *
- * Something like this:
- * $wgParserTestRemote = array(
- * 'api-url' => 'http://www.mediawiki.org/w/api.php',
- * 'repo' => 'MediaWiki',
- * 'suite' => 'ParserTests',
- * 'path' => '/trunk/phase3', // not used client-side; for reference
- * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
- * );
- */
- $wgParserTestRemote = false;
- /**
- * Allow running of javascript test suites via [[Special:JavaScriptTest]] (such as QUnit).
- */
- $wgEnableJavaScriptTest = false;
- /**
- * Configuration for javascript testing.
- */
- $wgJavaScriptTestConfig = array(
- 'qunit' => array(
- // Page where documentation can be found relevant to the QUnit test suite being ran.
- // Used in the intro paragraph on [[Special:JavaScriptTest/qunit]] for the
- // documentation link in the "javascripttest-qunit-intro" message.
- 'documentation' => '//www.mediawiki.org/wiki/Manual:JavaScript_unit_testing',
- // If you are submitting the QUnit test suite to a TestSwarm instance,
- // point this to the "inject.js" script of that instance. This is was registers
- // the QUnit hooks to extract the test results and push them back up into the
- // TestSwarm database.
- // @example 'http://localhost/testswarm/js/inject.js'
- // @example '//integration.mediawiki.org/testswarm/js/inject.js'
- 'testswarm-injectjs' => false,
- ),
- );
- /**
- * Overwrite the caching key prefix with custom value.
- * @since 1.19
- */
- $wgCachePrefix = false;
- /**
- * Display the new debugging toolbar. This also enables profiling on database
- * queries and other useful output.
- * Will disable file cache.
- *
- * @since 1.19
- */
- $wgDebugToolbar = false;
- /** @} */ # end of profiling, testing and debugging }
- /************************************************************************//**
- * @name Search
- * @{
- */
- /**
- * Set this to true to disable the full text search feature.
- */
- $wgDisableTextSearch = false;
- /**
- * Set to true to have nicer highligted text in search results,
- * by default off due to execution overhead
- */
- $wgAdvancedSearchHighlighting = false;
- /**
- * Regexp to match word boundaries, defaults for non-CJK languages
- * should be empty for CJK since the words are not separate
- */
- $wgSearchHighlightBoundaries = '[\p{Z}\p{P}\p{C}]';
- /**
- * Set to true to have the search engine count total
- * search matches to present in the Special:Search UI.
- * Not supported by every search engine shipped with MW.
- *
- * This could however be slow on larger wikis, and is pretty flaky
- * with the current title vs content split. Recommend avoiding until
- * that's been worked out cleanly; but this may aid in testing the
- * search UI and API to confirm that the result count works.
- */
- $wgCountTotalSearchHits = false;
- /**
- * Template for OpenSearch suggestions, defaults to API action=opensearch
- *
- * Sites with heavy load would tipically have these point to a custom
- * PHP wrapper to avoid firing up mediawiki for every keystroke
- *
- * Placeholders: {searchTerms}
- *
- */
- $wgOpenSearchTemplate = false;
- /**
- * Enable OpenSearch suggestions requested by MediaWiki. Set this to
- * false if you've disabled scripts that use api?action=opensearch and
- * want reduce load caused by cached scripts still pulling suggestions.
- * It will let the API fallback by responding with an empty array.
- */
- $wgEnableOpenSearchSuggest = true;
- /**
- * Expiry time for search suggestion responses
- */
- $wgSearchSuggestCacheExpiry = 1200;
- /**
- * If you've disabled search semi-permanently, this also disables updates to the
- * table. If you ever re-enable, be sure to rebuild the search table.
- */
- $wgDisableSearchUpdate = false;
- /**
- * List of namespaces which are searched by default.
- *
- * @par Example:
- * @code
- * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
- * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
- * @endcode
- */
- $wgNamespacesToBeSearchedDefault = array(
- NS_MAIN => true,
- );
- /**
- * Namespaces to be searched when user clicks the "Help" tab
- * on Special:Search.
- *
- * Same format as $wgNamespacesToBeSearchedDefault.
- */
- $wgNamespacesToBeSearchedHelp = array(
- NS_PROJECT => true,
- NS_HELP => true,
- );
- /**
- * If set to true the 'searcheverything' preference will be effective only for
- * logged-in users.
- * Useful for big wikis to maintain different search profiles for anonymous and
- * logged-in users.
- *
- */
- $wgSearchEverythingOnlyLoggedIn = false;
- /**
- * Disable the internal MySQL-based search, to allow it to be
- * implemented by an extension instead.
- */
- $wgDisableInternalSearch = false;
- /**
- * Set this to a URL to forward search requests to some external location.
- * If the URL includes '$1', this will be replaced with the URL-encoded
- * search term.
- *
- * @par Example:
- * To forward to Google you'd have something like:
- * @code
- * $wgSearchForwardUrl =
- * 'http://www.google.com/search?q=$1' .
- * '&domains=http://example.com' .
- * '&sitesearch=http://example.com' .
- * '&ie=utf-8&oe=utf-8';
- * @endcode
- */
- $wgSearchForwardUrl = null;
- /**
- * Search form behavior.
- * - true = use Go & Search buttons
- * - false = use Go button & Advanced search link
- */
- $wgUseTwoButtonsSearchForm = true;
- /**
- * Array of namespaces to generate a Google sitemap for when the
- * maintenance/generateSitemap.php script is run, or false if one is to be ge-
- * nerated for all namespaces.
- */
- $wgSitemapNamespaces = false;
- /**
- * Custom namespace priorities for sitemaps. Setting this will allow you to
- * set custom priorities to namsepaces when sitemaps are generated using the
- * maintenance/generateSitemap.php script.
- *
- * This should be a map of namespace IDs to priority
- * @par Example:
- * @code
- * $wgSitemapNamespacesPriorities = array(
- * NS_USER => '0.9',
- * NS_HELP => '0.0',
- * );
- * @endcode
- */
- $wgSitemapNamespacesPriorities = false;
- /**
- * If true, searches for IP addresses will be redirected to that IP's
- * contributions page. E.g. searching for "1.2.3.4" will redirect to
- * [[Special:Contributions/1.2.3.4]]
- */
- $wgEnableSearchContributorsByIP = true;
- /** @} */ # end of search settings
- /************************************************************************//**
- * @name Edit user interface
- * @{
- */
- /**
- * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
- * fall back to the old behaviour (no merging).
- */
- $wgDiff3 = '/usr/bin/diff3';
- /**
- * Path to the GNU diff utility.
- */
- $wgDiff = '/usr/bin/diff';
- /**
- * Which namespaces have special treatment where they should be preview-on-open
- * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
- * can specify namespaces of pages they have special treatment for
- */
- $wgPreviewOnOpenNamespaces = array(
- NS_CATEGORY => true
- );
- /**
- * Activate external editor interface for files and pages
- * See http://www.mediawiki.org/wiki/Manual:External_editors
- */
- $wgUseExternalEditor = true;
- /** Go button goes straight to the edit screen if the article doesn't exist. */
- $wgGoToEdit = false;
- /**
- * Enable the UniversalEditButton for browsers that support it
- * (currently only Firefox with an extension)
- * See http://universaleditbutton.org for more background information
- */
- $wgUniversalEditButton = true;
- /**
- * If user doesn't specify any edit summary when making a an edit, MediaWiki
- * will try to automatically create one. This feature can be disabled by set-
- * ting this variable false.
- */
- $wgUseAutomaticEditSummaries = true;
- /** @} */ # end edit UI }
- /************************************************************************//**
- * @name Maintenance
- * See also $wgSiteNotice
- * @{
- */
- /**
- * @cond file_level_code
- * Set $wgCommandLineMode if it's not set already, to avoid notices
- */
- if( !isset( $wgCommandLineMode ) ) {
- $wgCommandLineMode = false;
- }
- /** @endcond */
- /** For colorized maintenance script output, is your terminal background dark ? */
- $wgCommandLineDarkBg = false;
- /**
- * Array for extensions to register their maintenance scripts with the
- * system. The key is the name of the class and the value is the full
- * path to the file
- */
- $wgMaintenanceScripts = array();
- /**
- * Set this to a string to put the wiki into read-only mode. The text will be
- * used as an explanation to users.
- *
- * This prevents most write operations via the web interface. Cache updates may
- * still be possible. To prevent database writes completely, use the read_only
- * option in MySQL.
- */
- $wgReadOnly = null;
- /**
- * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
- * Its contents will be shown to users as part of the read-only warning
- * message.
- *
- * Will default to "{$wgUploadDirectory}/lock_yBgMBwiR" in Setup.php
- */
- $wgReadOnlyFile = false;
- /**
- * When you run the web-based upgrade utility, it will tell you what to set
- * this to in order to authorize the upgrade process. It will subsequently be
- * used as a password, to authorize further upgrades.
- *
- * For security, do not set this to a guessable string. Use the value supplied
- * by the install/upgrade process. To cause the upgrader to generate a new key,
- * delete the old key from LocalSettings.php.
- */
- $wgUpgradeKey = false;
- /**
- * Map GIT repository URLs to viewer URLs to provide links in Special:Version
- *
- * Key is a pattern passed to preg_match() and preg_replace(),
- * without the delimiters (which are #) and must match the whole URL.
- * The value is the replacement for the key (it can contain $1, etc.)
- * %h will be replaced by the short SHA-1 (7 first chars) and %H by the
- * full SHA-1 of the HEAD revision.
- *
- * @since 1.20
- */
- $wgGitRepositoryViewers = array(
- 'https://gerrit.wikimedia.org/r/p/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
- 'ssh://(?:[a-z0-9_]+@)?gerrit.wikimedia.org:29418/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
- );
- /** @} */ # End of maintenance }
- /************************************************************************//**
- * @name Recent changes, new pages, watchlist and history
- * @{
- */
- /**
- * Recentchanges items are periodically purged; entries older than this many
- * seconds will go.
- * Default: 13 weeks = about three months
- */
- $wgRCMaxAge = 13 * 7 * 24 * 3600;
- /**
- * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
- * higher than what will be stored. Note that this is disabled by default
- * because we sometimes do have RC data which is beyond the limit for some
- * reason, and some users may use the high numbers to display that data which
- * is still there.
- */
- $wgRCFilterByAge = false;
- /**
- * List of Days and Limits options to list in the Special:Recentchanges and
- * Special:Recentchangeslinked pages.
- */
- $wgRCLinkLimits = array( 50, 100, 250, 500 );
- $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
- /**
- * Send recent changes updates via UDP. The updates will be formatted for IRC.
- * Set this to the IP address of the receiver.
- */
- $wgRC2UDPAddress = false;
- /**
- * Port number for RC updates
- */
- $wgRC2UDPPort = false;
- /**
- * Prefix to prepend to each UDP packet.
- * This can be used to identify the wiki. A script is available called
- * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
- * tab to identify the IRC channel to send the log line to.
- */
- $wgRC2UDPPrefix = '';
- /**
- * If this is set to true, $wgLocalInterwiki will be prepended to links in the
- * IRC feed. If this is set to a string, that string will be used as the prefix.
- */
- $wgRC2UDPInterwikiPrefix = false;
- /**
- * Set to true to omit "bot" edits (by users with the bot permission) from the
- * UDP feed.
- */
- $wgRC2UDPOmitBots = false;
- /**
- * Enable user search in Special:Newpages
- * This is really a temporary hack around an index install bug on some Wikipedias.
- * Kill it once fixed.
- */
- $wgEnableNewpagesUserFilter = true;
- /** Use RC Patrolling to check for vandalism */
- $wgUseRCPatrol = true;
- /** Use new page patrolling to check new pages on Special:Newpages */
- $wgUseNPPatrol = true;
- /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
- $wgFeed = true;
- /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
- * eg Recentchanges, Newpages. */
- $wgFeedLimit = 50;
- /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
- * A cached version will continue to be served out even if changes
- * are made, until this many seconds runs out since the last render.
- *
- * If set to 0, feed caching is disabled. Use this for debugging only;
- * feed generation can be pretty slow with diffs.
- */
- $wgFeedCacheTimeout = 60;
- /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
- * pages larger than this size. */
- $wgFeedDiffCutoff = 32768;
- /** Override the site's default RSS/ATOM feed for recentchanges that appears on
- * every page. Some sites might have a different feed they'd like to promote
- * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
- * Should be a format as key (either 'rss' or 'atom') and an URL to the feed
- * as value.
- * @par Example:
- * Configure the 'atom' feed to http://example.com/somefeed.xml
- * @code
- * $wgSiteFeed['atom'] = "http://example.com/somefeed.xml";
- * @endcode
- */
- $wgOverrideSiteFeed = array();
- /**
- * Available feeds objects.
- * Should probably only be defined when a page is syndicated ie when
- * $wgOut->isSyndicated() is true.
- */
- $wgFeedClasses = array(
- 'rss' => 'RSSFeed',
- 'atom' => 'AtomFeed',
- );
- /**
- * Which feed types should we provide by default? This can include 'rss',
- * 'atom', neither, or both.
- */
- $wgAdvertisedFeedTypes = array( 'atom' );
- /** Show watching users in recent changes, watchlist and page history views */
- $wgRCShowWatchingUsers = false; # UPO
- /** Show watching users in Page views */
- $wgPageShowWatchingUsers = false;
- /** Show the amount of changed characters in recent changes */
- $wgRCShowChangedSize = true;
- /**
- * If the difference between the character counts of the text
- * before and after the edit is below that value, the value will be
- * highlighted on the RC page.
- */
- $wgRCChangedSizeThreshold = 500;
- /**
- * Show "Updated (since my last visit)" marker in RC view, watchlist and history
- * view for watched pages with new changes */
- $wgShowUpdatedMarker = true;
- /**
- * Disable links to talk pages of anonymous users (IPs) in listings on special
- * pages like page history, Special:Recentchanges, etc.
- */
- $wgDisableAnonTalk = false;
- /**
- * Enable filtering of categories in Recentchanges
- */
- $wgAllowCategorizedRecentChanges = false;
- /**
- * Allow filtering by change tag in recentchanges, history, etc
- * Has no effect if no tags are defined in valid_tag.
- */
- $wgUseTagFilter = true;
- /** @} */ # end RC/watchlist }
- /************************************************************************//**
- * @name Copyright and credits settings
- * @{
- */
- /**
- * Override for copyright metadata.
- *
- * This is the name of the page containing information about the wiki's copyright status,
- * which will be added as a link in the footer if it is specified. It overrides
- * $wgRightsUrl if both are specified.
- */
- $wgRightsPage = null;
- /**
- * Set this to specify an external URL containing details about the content license used on your wiki.
- * If $wgRightsPage is set then this setting is ignored.
- */
- $wgRightsUrl = null;
- /**
- * If either $wgRightsUrl or $wgRightsPage is specified then this variable gives the text for the link.
- * If using $wgRightsUrl then this value must be specified. If using $wgRightsPage then the name of the
- * page will also be used as the link if this variable is not set.
- */
- $wgRightsText = null;
- /**
- * Override for copyright metadata.
- */
- $wgRightsIcon = null;
- /**
- * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
- */
- $wgLicenseTerms = false;
- /**
- * Set this to some HTML to override the rights icon with an arbitrary logo
- * @deprecated since 1.18 Use $wgFooterIcons['copyright']['copyright']
- */
- $wgCopyrightIcon = null;
- /** Set this to true if you want detailed copyright information forms on Upload. */
- $wgUseCopyrightUpload = false;
- /**
- * Set this to the number of authors that you want to be credited below an
- * article text. Set it to zero to hide the attribution block, and a negative
- * number (like -1) to show all authors. Note that this will require 2-3 extra
- * database hits, which can have a not insignificant impact on performance for
- * large wikis.
- */
- $wgMaxCredits = 0;
- /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
- * Otherwise, link to a separate credits page. */
- $wgShowCreditsIfMax = true;
- /** @} */ # end of copyright and credits settings }
- /************************************************************************//**
- * @name Import / Export
- * @{
- */
- /**
- * List of interwiki prefixes for wikis we'll accept as sources for
- * Special:Import (for sysops). Since complete page history can be imported,
- * these should be 'trusted'.
- *
- * If a user has the 'import' permission but not the 'importupload' permission,
- * they will only be able to run imports through this transwiki interface.
- */
- $wgImportSources = array();
- /**
- * Optional default target namespace for interwiki imports.
- * Can use this to create an incoming "transwiki"-style queue.
- * Set to numeric key, not the name.
- *
- * Users may override this in the Special:Import dialog.
- */
- $wgImportTargetNamespace = null;
- /**
- * If set to false, disables the full-history option on Special:Export.
- * This is currently poorly optimized for long edit histories, so is
- * disabled on Wikimedia's sites.
- */
- $wgExportAllowHistory = true;
- /**
- * If set nonzero, Special:Export requests for history of pages with
- * more revisions than this will be rejected. On some big sites things
- * could get bogged down by very very long pages.
- */
- $wgExportMaxHistory = 0;
- /**
- * Return distinct author list (when not returning full history)
- */
- $wgExportAllowListContributors = false;
- /**
- * If non-zero, Special:Export accepts a "pagelink-depth" parameter
- * up to this specified level, which will cause it to include all
- * pages linked to from the pages you specify. Since this number
- * can become *insanely large* and could easily break your wiki,
- * it's disabled by default for now.
- *
- * @warning There's a HARD CODED limit of 5 levels of recursion to prevent a
- * crazy-big export from being done by someone setting the depth number too
- * high. In other words, last resort safety net.
- */
- $wgExportMaxLinkDepth = 0;
- /**
- * Whether to allow the "export all pages in namespace" option
- */
- $wgExportFromNamespaces = false;
- /**
- * Whether to allow exporting the entire wiki into a single file
- */
- $wgExportAllowAll = false;
- /** @} */ # end of import/export }
- /*************************************************************************//**
- * @name Extensions
- * @{
- */
- /**
- * A list of callback functions which are called once MediaWiki is fully
- * initialised
- */
- $wgExtensionFunctions = array();
- /**
- * Extension messages files.
- *
- * Associative array mapping extension name to the filename where messages can be
- * found. The file should contain variable assignments. Any of the variables
- * present in languages/messages/MessagesEn.php may be defined, but $messages
- * is the most common.
- *
- * Variables defined in extensions will override conflicting variables defined
- * in the core.
- *
- * @par Example:
- * @code
- * $wgExtensionMessagesFiles['ConfirmEdit'] = __DIR__.'/ConfirmEdit.i18n.php';
- * @endcode
- */
- $wgExtensionMessagesFiles = array();
- /**
- * Parser output hooks.
- * This is an associative array where the key is an extension-defined tag
- * (typically the extension name), and the value is a PHP callback.
- * These will be called as an OutputPageParserOutput hook, if the relevant
- * tag has been registered with the parser output object.
- *
- * Registration is done with $pout->addOutputHook( $tag, $data ).
- *
- * The callback has the form:
- * @code
- * function outputHook( $outputPage, $parserOutput, $data ) { ... }
- * @endcode
- */
- $wgParserOutputHooks = array();
- /**
- * List of valid skin names.
- * The key should be the name in all lower case, the value should be a properly
- * cased name for the skin. This value will be prefixed with "Skin" to create the
- * class name of the skin to load, and if the skin's class cannot be found through
- * the autoloader it will be used to load a .php file by that name in the skins directory.
- * The default skins will be added later, by Skin::getSkinNames(). Use
- * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
- */
- $wgValidSkinNames = array();
- /**
- * Special page list.
- * See the top of SpecialPage.php for documentation.
- */
- $wgSpecialPages = array();
- /**
- * Array mapping class names to filenames, for autoloading.
- */
- $wgAutoloadClasses = array();
- /**
- * An array of extension types and inside that their names, versions, authors,
- * urls, descriptions and pointers to localized description msgs. Note that
- * the version, url, description and descriptionmsg key can be omitted.
- *
- * @code
- * $wgExtensionCredits[$type][] = array(
- * 'name' => 'Example extension',
- * 'version' => 1.9,
- * 'path' => __FILE__,
- * 'author' => 'Foo Barstein',
- * 'url' => 'http://wwww.example.com/Example%20Extension/',
- * 'description' => 'An example extension',
- * 'descriptionmsg' => 'exampleextension-desc',
- * );
- * @endcode
- *
- * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
- * Where 'descriptionmsg' can be an array with message key and parameters:
- * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
- */
- $wgExtensionCredits = array();
- /**
- * Authentication plugin.
- * @var $wgAuth AuthPlugin
- */
- $wgAuth = null;
- /**
- * Global list of hooks.
- *
- * The key is one of the events made available by MediaWiki, you can find
- * a description for most of them in docs/hooks.txt. The array is used
- * internally by Hook:run().
- *
- * The value can be one of:
- *
- * - A function name:
- * @code
- * $wgHooks['event_name'][] = $function;
- * @endcode
- * - A function with some data:
- * @code
- * $wgHooks['event_name'][] = array($function, $data);
- * @endcode
- * - A an object method:
- * @code
- * $wgHooks['event_name'][] = array($object, 'method');
- * @endcode
- *
- * @warning You should always append to an event array or you will end up
- * deleting a previous registered hook.
- *
- * @todo Does it support PHP closures?
- */
- $wgHooks = array();
- /**
- * Maps jobs to their handling classes; extensions
- * can add to this to provide custom jobs
- */
- $wgJobClasses = array(
- 'refreshLinks' => 'RefreshLinksJob',
- 'refreshLinks2' => 'RefreshLinksJob2',
- 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
- 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
- 'sendMail' => 'EmaillingJob',
- 'enotifNotify' => 'EnotifNotifyJob',
- 'fixDoubleRedirect' => 'DoubleRedirectJob',
- 'uploadFromUrl' => 'UploadFromUrlJob',
- );
- /**
- * Jobs that must be explicitly requested, i.e. aren't run by job runners unless special flags are set.
- *
- * These can be:
- * - Very long-running jobs.
- * - Jobs that you would never want to run as part of a page rendering request.
- * - Jobs that you want to run on specialized machines ( like transcoding, or a particular
- * machine on your cluster has 'outside' web access you could restrict uploadFromUrl )
- */
- $wgJobTypesExcludedFromDefaultQueue = array();
- /**
- * Additional functions to be performed with updateSpecialPages.
- * Expensive Querypages are already updated.
- */
- $wgSpecialPageCacheUpdates = array(
- 'Statistics' => array( 'SiteStatsUpdate', 'cacheUpdate' )
- );
- /**
- * Hooks that are used for outputting exceptions. Format is:
- * $wgExceptionHooks[] = $funcname
- * or:
- * $wgExceptionHooks[] = array( $class, $funcname )
- * Hooks should return strings or false
- */
- $wgExceptionHooks = array();
- /**
- * Page property link table invalidation lists. When a page property
- * changes, this may require other link tables to be updated (eg
- * adding __HIDDENCAT__ means the hiddencat tracking category will
- * have been added, so the categorylinks table needs to be rebuilt).
- * This array can be added to by extensions.
- */
- $wgPagePropLinkInvalidations = array(
- 'hiddencat' => 'categorylinks',
- );
- /** @} */ # End extensions }
- /*************************************************************************//**
- * @name Categories
- * @{
- */
- /**
- * Use experimental, DMOZ-like category browser
- */
- $wgUseCategoryBrowser = false;
- /**
- * On category pages, show thumbnail gallery for images belonging to that
- * category instead of listing them as articles.
- */
- $wgCategoryMagicGallery = true;
- /**
- * Paging limit for categories
- */
- $wgCategoryPagingLimit = 200;
- /**
- * Specify how category names should be sorted, when listed on a category page.
- * A sorting scheme is also known as a collation.
- *
- * Available values are:
- *
- * - uppercase: Converts the category name to upper case, and sorts by that.
- *
- * - identity: Does no conversion. Sorts by binary value of the string.
- *
- * - uca-default: Provides access to the Unicode Collation Algorithm with
- * the default element table. This is a compromise collation which sorts
- * all languages in a mediocre way. However, it is better than "uppercase".
- *
- * To use the uca-default collation, you must have PHP's intl extension
- * installed. See http://php.net/manual/en/intl.setup.php . The details of the
- * resulting collation will depend on the version of ICU installed on the
- * server.
- *
- * After you change this, you must run maintenance/updateCollation.php to fix
- * the sort keys in the database.
- *
- * Extensions can define there own collations by subclassing Collation
- * and using the Collation::factory hook.
- */
- $wgCategoryCollation = 'uppercase';
- /** @} */ # End categories }
- /*************************************************************************//**
- * @name Logging
- * @{
- */
- /**
- * The logging system has two levels: an event type, which describes the
- * general category and can be viewed as a named subset of all logs; and
- * an action, which is a specific kind of event that can exist in that
- * log type.
- */
- $wgLogTypes = array(
- '',
- 'block',
- 'protect',
- 'rights',
- 'delete',
- 'upload',
- 'move',
- 'import',
- 'patrol',
- 'merge',
- 'suppress',
- );
- /**
- * This restricts log access to those who have a certain right
- * Users without this will not see it in the option menu and can not view it
- * Restricted logs are not added to recent changes
- * Logs should remain non-transcludable
- * Format: logtype => permissiontype
- */
- $wgLogRestrictions = array(
- 'suppress' => 'suppressionlog'
- );
- /**
- * Show/hide links on Special:Log will be shown for these log types.
- *
- * This is associative array of log type => boolean "hide by default"
- *
- * See $wgLogTypes for a list of available log types.
- *
- * @par Example:
- * @code
- * $wgFilterLogTypes => array(
- * 'move' => true,
- * 'import' => false,
- * );
- * @endcode
- *
- * Will display show/hide links for the move and import logs. Move logs will be
- * hidden by default unless the link is clicked. Import logs will be shown by
- * default, and hidden when the link is clicked.
- *
- * A message of the form log-show-hide-[type] should be added, and will be used
- * for the link text.
- */
- $wgFilterLogTypes = array(
- 'patrol' => true
- );
- /**
- * Lists the message key string for each log type. The localized messages
- * will be listed in the user interface.
- *
- * Extensions with custom log types may add to this array.
- *
- * @since 1.19, if you follow the naming convention log-name-TYPE,
- * where TYPE is your log type, yoy don't need to use this array.
- */
- $wgLogNames = array(
- '' => 'all-logs-page',
- 'block' => 'blocklogpage',
- 'protect' => 'protectlogpage',
- 'rights' => 'rightslog',
- 'delete' => 'dellogpage',
- 'upload' => 'uploadlogpage',
- 'move' => 'movelogpage',
- 'import' => 'importlogpage',
- 'patrol' => 'patrol-log-page',
- 'merge' => 'mergelog',
- 'suppress' => 'suppressionlog',
- );
- /**
- * Lists the message key string for descriptive text to be shown at the
- * top of each log type.
- *
- * Extensions with custom log types may add to this array.
- *
- * @since 1.19, if you follow the naming convention log-description-TYPE,
- * where TYPE is your log type, yoy don't need to use this array.
- */
- $wgLogHeaders = array(
- '' => 'alllogstext',
- 'block' => 'blocklogtext',
- 'protect' => 'protectlogtext',
- 'rights' => 'rightslogtext',
- 'delete' => 'dellogpagetext',
- 'upload' => 'uploadlogpagetext',
- 'move' => 'movelogpagetext',
- 'import' => 'importlogpagetext',
- 'patrol' => 'patrol-log-header',
- 'merge' => 'mergelogpagetext',
- 'suppress' => 'suppressionlogtext',
- );
- /**
- * Lists the message key string for formatting individual events of each
- * type and action when listed in the logs.
- *
- * Extensions with custom log types may add to this array.
- */
- $wgLogActions = array(
- 'block/block' => 'blocklogentry',
- 'block/unblock' => 'unblocklogentry',
- 'block/reblock' => 'reblock-logentry',
- 'protect/protect' => 'protectedarticle',
- 'protect/modify' => 'modifiedarticleprotection',
- 'protect/unprotect' => 'unprotectedarticle',
- 'protect/move_prot' => 'movedarticleprotection',
- 'rights/rights' => 'rightslogentry',
- 'rights/autopromote' => 'rightslogentry-autopromote',
- 'upload/upload' => 'uploadedimage',
- 'upload/overwrite' => 'overwroteimage',
- 'upload/revert' => 'uploadedimage',
- 'import/upload' => 'import-logentry-upload',
- 'import/interwiki' => 'import-logentry-interwiki',
- 'merge/merge' => 'pagemerge-logentry',
- 'suppress/block' => 'blocklogentry',
- 'suppress/reblock' => 'reblock-logentry',
- );
- /**
- * The same as above, but here values are names of functions,
- * not messages.
- * @see LogPage::actionText
- * @see LogFormatter
- */
- $wgLogActionsHandlers = array(
- 'move/move' => 'MoveLogFormatter',
- 'move/move_redir' => 'MoveLogFormatter',
- 'delete/delete' => 'DeleteLogFormatter',
- 'delete/restore' => 'DeleteLogFormatter',
- 'delete/revision' => 'DeleteLogFormatter',
- 'delete/event' => 'DeleteLogFormatter',
- 'suppress/revision' => 'DeleteLogFormatter',
- 'suppress/event' => 'DeleteLogFormatter',
- 'suppress/delete' => 'DeleteLogFormatter',
- 'patrol/patrol' => 'PatrolLogFormatter',
- );
- /**
- * Maintain a log of newusers at Log/newusers?
- */
- $wgNewUserLog = true;
- /** @} */ # end logging }
- /*************************************************************************//**
- * @name Special pages (general and miscellaneous)
- * @{
- */
- /**
- * Allow special page inclusions such as {{Special:Allpages}}
- */
- $wgAllowSpecialInclusion = true;
- /**
- * Set this to an array of special page names to prevent
- * maintenance/updateSpecialPages.php from updating those pages.
- */
- $wgDisableQueryPageUpdate = false;
- /**
- * List of special pages, followed by what subtitle they should go under
- * at Special:SpecialPages
- */
- $wgSpecialPageGroups = array(
- 'DoubleRedirects' => 'maintenance',
- 'BrokenRedirects' => 'maintenance',
- 'Lonelypages' => 'maintenance',
- 'Uncategorizedpages' => 'maintenance',
- 'Uncategorizedcategories' => 'maintenance',
- 'Uncategorizedimages' => 'maintenance',
- 'Uncategorizedtemplates' => 'maintenance',
- 'Unusedcategories' => 'maintenance',
- 'Unusedimages' => 'maintenance',
- 'Protectedpages' => 'maintenance',
- 'Protectedtitles' => 'maintenance',
- 'Unusedtemplates' => 'maintenance',
- 'Withoutinterwiki' => 'maintenance',
- 'Longpages' => 'maintenance',
- 'Shortpages' => 'maintenance',
- 'Ancientpages' => 'maintenance',
- 'Deadendpages' => 'maintenance',
- 'Wantedpages' => 'maintenance',
- 'Wantedcategories' => 'maintenance',
- 'Wantedfiles' => 'maintenance',
- 'Wantedtemplates' => 'maintenance',
- 'Unwatchedpages' => 'maintenance',
- 'Fewestrevisions' => 'maintenance',
- 'Userlogin' => 'login',
- 'Userlogout' => 'login',
- 'CreateAccount' => 'login',
- 'Recentchanges' => 'changes',
- 'Recentchangeslinked' => 'changes',
- 'Watchlist' => 'changes',
- 'Newimages' => 'changes',
- 'Newpages' => 'changes',
- 'Log' => 'changes',
- 'Tags' => 'changes',
- 'Upload' => 'media',
- 'Listfiles' => 'media',
- 'MIMEsearch' => 'media',
- 'FileDuplicateSearch' => 'media',
- 'Filepath' => 'media',
- 'Listusers' => 'users',
- 'Activeusers' => 'users',
- 'Listgrouprights' => 'users',
- 'BlockList' => 'users',
- 'Contributions' => 'users',
- 'Emailuser' => 'users',
- 'Listadmins' => 'users',
- 'Listbots' => 'users',
- 'Userrights' => 'users',
- 'Block' => 'users',
- 'Unblock' => 'users',
- 'Preferences' => 'users',
- 'ChangeEmail' => 'users',
- 'ChangePassword' => 'users',
- 'DeletedContributions' => 'users',
- 'PasswordReset' => 'users',
- 'Mostlinked' => 'highuse',
- 'Mostlinkedcategories' => 'highuse',
- 'Mostlinkedtemplates' => 'highuse',
- 'Mostcategories' => 'highuse',
- 'Mostimages' => 'highuse',
- 'Mostinterwikis' => 'highuse',
- 'Mostrevisions' => 'highuse',
- 'Allpages' => 'pages',
- 'Prefixindex' => 'pages',
- 'Listredirects' => 'pages',
- 'Categories' => 'pages',
- 'Disambiguations' => 'pages',
- 'Randompage' => 'redirects',
- 'Randomredirect' => 'redirects',
- 'Mypage' => 'redirects',
- 'Mytalk' => 'redirects',
- 'Mycontributions' => 'redirects',
- 'Search' => 'redirects',
- 'LinkSearch' => 'redirects',
- 'ComparePages' => 'pagetools',
- 'Movepage' => 'pagetools',
- 'MergeHistory' => 'pagetools',
- 'Revisiondelete' => 'pagetools',
- 'Undelete' => 'pagetools',
- 'Export' => 'pagetools',
- 'Import' => 'pagetools',
- 'Whatlinkshere' => 'pagetools',
- 'Statistics' => 'wiki',
- 'Version' => 'wiki',
- 'Lockdb' => 'wiki',
- 'Unlockdb' => 'wiki',
- 'Allmessages' => 'wiki',
- 'Popularpages' => 'wiki',
- 'Specialpages' => 'other',
- 'Blockme' => 'other',
- 'Booksources' => 'other',
- 'JavaScriptTest' => 'other',
- );
- /** Whether or not to sort special pages in Special:Specialpages */
- $wgSortSpecialPages = true;
- /**
- * On Special:Unusedimages, consider images "used", if they are put
- * into a category. Default (false) is not to count those as used.
- */
- $wgCountCategorizedImagesAsUsed = false;
- /**
- * Maximum number of links to a redirect page listed on
- * Special:Whatlinkshere/RedirectDestination
- */
- $wgMaxRedirectLinksRetrieved = 500;
- /** @} */ # end special pages }
- /*************************************************************************//**
- * @name Actions
- * @{
- */
- /**
- * Array of allowed values for the "title=foo&action=<action>" parameter. Syntax is:
- * 'foo' => 'ClassName' Load the specified class which subclasses Action
- * 'foo' => true Load the class FooAction which subclasses Action
- * If something is specified in the getActionOverrides()
- * of the relevant Page object it will be used
- * instead of the default class.
- * 'foo' => false The action is disabled; show an error message
- * Unsetting core actions will probably cause things to complain loudly.
- */
- $wgActions = array(
- 'credits' => true,
- 'delete' => true,
- 'edit' => true,
- 'history' => true,
- 'info' => true,
- 'markpatrolled' => true,
- 'protect' => true,
- 'purge' => true,
- 'raw' => true,
- 'render' => true,
- 'revert' => true,
- 'revisiondelete' => true,
- 'rollback' => true,
- 'submit' => true,
- 'unprotect' => true,
- 'unwatch' => true,
- 'view' => true,
- 'watch' => true,
- );
- /**
- * Array of disabled article actions, e.g. view, edit, delete, etc.
- * @deprecated since 1.18; just set $wgActions['action'] = false instead
- */
- $wgDisabledActions = array();
- /** @} */ # end actions }
- /*************************************************************************//**
- * @name Robot (search engine crawler) policy
- * See also $wgNoFollowLinks.
- * @{
- */
- /**
- * Default robot policy. The default policy is to encourage indexing and fol-
- * lowing of links. It may be overridden on a per-namespace and/or per-page
- * basis.
- */
- $wgDefaultRobotPolicy = 'index,follow';
- /**
- * Robot policies per namespaces. The default policy is given above, the array
- * is made of namespace constants as defined in includes/Defines.php. You can-
- * not specify a different default policy for NS_SPECIAL: it is always noindex,
- * nofollow. This is because a number of special pages (e.g., ListPages) have
- * many permutations of options that display the same data under redundant
- * URLs, so search engine spiders risk getting lost in a maze of twisty special
- * pages, all alike, and never reaching your actual content.
- *
- * @par Example:
- * @code
- * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
- * @endcode
- */
- $wgNamespaceRobotPolicies = array();
- /**
- * Robot policies per article. These override the per-namespace robot policies.
- * Must be in the form of an array where the key part is a properly canonical-
- * ised text form title and the value is a robot policy.
- *
- * @par Example:
- * @code
- * $wgArticleRobotPolicies = array(
- * 'Main Page' => 'noindex,follow',
- * 'User:Bob' => 'index,follow',
- * );
- * @endcode
- *
- * @par Example that DOES NOT WORK because the names are not canonical text
- * forms:
- * @code
- * $wgArticleRobotPolicies = array(
- * # Underscore, not space!
- * 'Main_Page' => 'noindex,follow',
- * # "Project", not the actual project name!
- * 'Project:X' => 'index,follow',
- * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
- * 'abc' => 'noindex,nofollow'
- * );
- * @endcode
- */
- $wgArticleRobotPolicies = array();
- /**
- * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
- * will not function, so users can't decide whether pages in that namespace are
- * indexed by search engines. If set to null, default to $wgContentNamespaces.
- *
- * @par Example:
- * @code
- * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
- * @endcode
- */
- $wgExemptFromUserRobotsControl = null;
- /** @} */ # End robot policy }
- /************************************************************************//**
- * @name AJAX and API
- * Note: The AJAX entry point which this section refers to is gradually being
- * replaced by the API entry point, api.php. They are essentially equivalent.
- * Both of them are used for dynamic client-side features, via XHR.
- * @{
- */
- /**
- * Enable the MediaWiki API for convenient access to
- * machine-readable data via api.php
- *
- * See http://www.mediawiki.org/wiki/API
- */
- $wgEnableAPI = true;
- /**
- * Allow the API to be used to perform write operations
- * (page edits, rollback, etc.) when an authorised user
- * accesses it
- */
- $wgEnableWriteAPI = true;
- /**
- * API module extensions.
- * Associative array mapping module name to class name.
- * Extension modules may override the core modules.
- * @todo Describe each of the variables, group them and add examples
- */
- $wgAPIModules = array();
- $wgAPIMetaModules = array();
- $wgAPIPropModules = array();
- $wgAPIListModules = array();
- /**
- * Maximum amount of rows to scan in a DB query in the API
- * The default value is generally fine
- */
- $wgAPIMaxDBRows = 5000;
- /**
- * The maximum size (in bytes) of an API result.
- * @warning Do not set this lower than $wgMaxArticleSize*1024
- */
- $wgAPIMaxResultSize = 8388608;
- /**
- * The maximum number of uncached diffs that can be retrieved in one API
- * request. Set this to 0 to disable API diffs altogether
- */
- $wgAPIMaxUncachedDiffs = 1;
- /**
- * Log file or URL (TCP or UDP) to log API requests to, or false to disable
- * API request logging
- */
- $wgAPIRequestLog = false;
- /**
- * Set the timeout for the API help text cache. If set to 0, caching disabled
- */
- $wgAPICacheHelpTimeout = 60*60;
- /**
- * Enable AJAX framework
- */
- $wgUseAjax = true;
- /**
- * List of Ajax-callable functions.
- * Extensions acting as Ajax callbacks must register here
- */
- $wgAjaxExportList = array();
- /**
- * Enable watching/unwatching pages using AJAX.
- * Requires $wgUseAjax to be true too.
- */
- $wgAjaxWatch = true;
- /**
- * Enable AJAX check for file overwrite, pre-upload
- */
- $wgAjaxUploadDestCheck = true;
- /**
- * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
- */
- $wgAjaxLicensePreview = true;
- /**
- * Settings for incoming cross-site AJAX requests:
- * Newer browsers support cross-site AJAX when the target resource allows requests
- * from the origin domain by the Access-Control-Allow-Origin header.
- * This is currently only used by the API (requests to api.php)
- * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
- *
- * - '*' matches any number of characters
- * - '?' matches any 1 character
- *
- * @par Example:
- * @code
- * $wgCrossSiteAJAXdomains = array(
- * 'www.mediawiki.org',
- * '*.wikipedia.org',
- * '*.wikimedia.org',
- * '*.wiktionary.org',
- * );
- * @endcode
- */
- $wgCrossSiteAJAXdomains = array();
- /**
- * Domains that should not be allowed to make AJAX requests,
- * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
- * Uses the same syntax as $wgCrossSiteAJAXdomains
- */
- $wgCrossSiteAJAXdomainExceptions = array();
- /** @} */ # End AJAX and API }
- /************************************************************************//**
- * @name Shell and process control
- * @{
- */
- /**
- * Maximum amount of virtual memory available to shell processes under linux, in KB.
- */
- $wgMaxShellMemory = 102400;
- /**
- * Maximum file size created by shell processes under linux, in KB
- * ImageMagick convert for example can be fairly hungry for scratch space
- */
- $wgMaxShellFileSize = 102400;
- /**
- * Maximum CPU time in seconds for shell processes under linux
- */
- $wgMaxShellTime = 180;
- /**
- * Executable path of the PHP cli binary (php/php5). Should be set up on install.
- */
- $wgPhpCli = '/usr/bin/php';
- /**
- * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
- * For Unix-like operating systems, set this to to a locale that has a UTF-8
- * character set. Only the character set is relevant.
- */
- $wgShellLocale = 'en_US.utf8';
- /** @} */ # End shell }
- /************************************************************************//**
- * @name HTTP client
- * @{
- */
- /**
- * Timeout for HTTP requests done internally
- */
- $wgHTTPTimeout = 25;
- /**
- * Timeout for Asynchronous (background) HTTP requests
- */
- $wgAsyncHTTPTimeout = 25;
- /**
- * Proxy to use for CURL requests.
- */
- $wgHTTPProxy = false;
- /** @} */ # End HTTP client }
- /************************************************************************//**
- * @name Job queue
- * See also $wgEnotifUseJobQ.
- * @{
- */
- /**
- * Number of jobs to perform per request. May be less than one in which case
- * jobs are performed probabalistically. If this is zero, jobs will not be done
- * during ordinary apache requests. In this case, maintenance/runJobs.php should
- * be run periodically.
- */
- $wgJobRunRate = 1;
- /**
- * Number of rows to update per job
- */
- $wgUpdateRowsPerJob = 500;
- /**
- * Number of rows to update per query
- */
- $wgUpdateRowsPerQuery = 100;
- /** @} */ # End job queue }
- /************************************************************************//**
- * @name HipHop compilation
- * @{
- */
- /**
- * The build directory for HipHop compilation.
- * Defaults to '$IP/maintenance/hiphop/build'.
- */
- $wgHipHopBuildDirectory = false;
- /**
- * The HipHop build type. Can be either "Debug" or "Release".
- */
- $wgHipHopBuildType = 'Debug';
- /**
- * Number of parallel processes to use during HipHop compilation, or "detect"
- * to guess from system properties.
- */
- $wgHipHopCompilerProcs = 'detect';
- /**
- * Filesystem extensions directory. Defaults to $IP/../extensions.
- *
- * To compile extensions with HipHop, set $wgExtensionsDirectory correctly,
- * and use code like:
- * @code
- * require( MWInit::extensionSetupPath( 'Extension/Extension.php' ) );
- * @endcode
- *
- * to include the extension setup file from LocalSettings.php. It is not
- * necessary to set this variable unless you use MWInit::extensionSetupPath().
- */
- $wgExtensionsDirectory = false;
- /**
- * A list of files that should be compiled into a HipHop build, in addition to
- * those listed in $wgAutoloadClasses. Add to this array in an extension setup
- * file in order to add files to the build.
- *
- * The files listed here must either be either absolute paths under $IP or
- * under $wgExtensionsDirectory, or paths relative to the virtual source root
- * "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for
- * extension files.
- */
- $wgCompiledFiles = array();
- /** @} */ # End of HipHop compilation }
- /************************************************************************//**
- * @name Mobile support
- * @{
- */
- /**
- * Name of the class used for mobile device detection, must be inherited from
- * IDeviceDetector.
- */
- $wgDeviceDetectionClass = 'DeviceDetection';
- /** @} */ # End of Mobile support }
- /************************************************************************//**
- * @name Miscellaneous
- * @{
- */
- /** Name of the external diff engine to use */
- $wgExternalDiffEngine = false;
- /**
- * Disable redirects to special pages and interwiki redirects, which use a 302
- * and have no "redirected from" link.
- *
- * @note This is only for articles with #REDIRECT in them. URL's containing a
- * local interwiki prefix (or a non-canonical special page name) are still hard
- * redirected regardless of this setting.
- */
- $wgDisableHardRedirects = false;
- /**
- * LinkHolderArray batch size
- * For debugging
- */
- $wgLinkHolderBatchSize = 1000;
- /**
- * By default MediaWiki does not register links pointing to same server in
- * externallinks dataset, use this value to override:
- */
- $wgRegisterInternalExternals = false;
- /**
- * Maximum number of pages to move at once when moving subpages with a page.
- */
- $wgMaximumMovedPages = 100;
- /**
- * Fix double redirects after a page move.
- * Tends to conflict with page move vandalism, use only on a private wiki.
- */
- $wgFixDoubleRedirects = false;
- /**
- * Allow redirection to another page when a user logs in.
- * To enable, set to a string like 'Main Page'
- */
- $wgRedirectOnLogin = null;
- /**
- * Configuration for processing pool control, for use in high-traffic wikis.
- * An implementation is provided in the PoolCounter extension.
- *
- * This configuration array maps pool types to an associative array. The only
- * defined key in the associative array is "class", which gives the class name.
- * The remaining elements are passed through to the class as constructor
- * parameters.
- *
- * @par Example:
- * @code
- * $wgPoolCounterConf = array( 'ArticleView' => array(
- * 'class' => 'PoolCounter_Client',
- * 'timeout' => 15, // wait timeout in seconds
- * 'workers' => 5, // maximum number of active threads in each pool
- * 'maxqueue' => 50, // maximum number of total threads in each pool
- * ... any extension-specific options...
- * );
- * @endcode
- */
- $wgPoolCounterConf = null;
- /**
- * To disable file delete/restore temporarily
- */
- $wgUploadMaintenance = false;
- /**
- * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
- */
- $wgEnableSelenium = false;
- $wgSeleniumTestConfigs = array();
- $wgSeleniumConfigFile = null;
- $wgDBtestuser = ''; //db user that has permission to create and drop the test databases only
- $wgDBtestpassword = '';
- /**
- * Whether the user must enter their password to change their e-mail address
- *
- * @since 1.20
- */
- $wgRequirePasswordforEmailChange = true;
- /**
- * For really cool vim folding this needs to be at the end:
- * vim: foldmarker=@{,@} foldmethod=marker
- * @}
- */